Rates
3000+
£ 0.41
Products Found: 837
Showing Results For: Multiplexer & Demultiplexer ICs
Multiplexer & Demultiplexer ICs
Multiplexer and Demultiplexer ICs are digital electronic components that transmit and receive multiple signals over a single channel or wire. Multiplexers and demultiplexers are commonly available in integrated circuit (IC) form, making them easy to use in digital systems. They are available in various sizes and configurations, depending on the number of input/output channels and the data rates required.
Multiplexer ICs:
A multiplexer (also known as a "mux") is an IC that combines several digital signals into one output signal. It has multiple input channels and one output channel. The output signal represents the data from one of the input channels based on a selection control signal. Multiplexers are widely used in the following ways:
- Digital Systems, including Communication Systems
- Data Acquisition Systems, and
- Control Systems.
Demultiplexer ICs:
A demultiplexer (also known as a "demux") is an IC that performs the reverse operation of a multiplexer. It takes one input signal and distributes it to multiple output channels. The output channel is selected based on a control signal. Demultiplexers are often used in digital communication systems to separate a single signal into multiple channels.
FILTERS
Filters
Rates
5+
£ 1.61
50+
£ 1.38
100+
£ 1.16
Availability
1468 In Stock
Rates
100+
£ 0.64
200+
£ 0.60
500+
£ 0.53
Availability
3998 In Stock
Rates
96+
£ 1.08
288+
£ 1.00
576+
£ 0.90
Availability
1918 In Stock
Rates
50+
£ 0.55
100+
£ 0.48
250+
£ 0.47
Availability
3998 In Stock
Rates
100+
£ 1.33
200+
£ 1.25
500+
£ 1.09
Availability
1998 In Stock
Rates
100+
£ 0.52
200+
£ 0.49
500+
£ 0.45
Availability
3998 In Stock
Showing
1 -
New Items
New items
TS12A4514PE4, Texas Instruments
Analogue Switches, Texas Instruments
Analogue Signal Switches and Multiplexers from Texas Instruments are high performance and suitable for a broad range of applications.
Switches and Multiplexers, Texas Instruments
Signal Switches and Multiplexers enable connector sharing, minimise duplicated circuitry in a design. They also isolate signal path along with simplifying signal routing.
New items
HV2708T-C/R8X, Microchip
The Microchip HV2708 device is a low harmonic distortion, low charge injection, 16-channel, high voltage analogue switch without high-voltage supplies. It is intended for use in applications requiring high-voltage switching controlled by low-voltage control signals, such as medical ultrasound imaging, driving piezoelectric transducers and printers. The device requires only +5V or +6V bias supply.
16-channel high-voltage analogue switch
Analog signal voltage up to ±100V
Only +5V bias supply required
66 MHz data shift clock frequency
Ultra-low quiescent current < 10 μA
Low parasitic capacitance
New items
MAX4781ETE+, Maxim Integrated
The MAX4781/MAX4782/MAX4783 are high-speed, low-voltage, low on-resistance, CMOS analog multiplexers/switches configured as an 8-channel multiplexer (MAX4781), two 4-channel multiplexers (MAX4782), and three single-pole/double-throw (SPDT) switches (MAX4783).
These devices operate with a +1.6V to +3.6V single supply. When powered from a +3V supply, MAX4781/MAX4782/MAX4783 feature a 0.7Ω on-resistance (RON), with 0.3Ω RON matching between channels, and 0.1Ω RON flatness. These devices handle rail-to-rail analog signals while consuming less than 3μW of quiescent power. They are available in space-saving 16-pin thin QFN (3mm x 3mm) and TSSOP packages.
On-Resistance
0.7Ω (+3V Supply)
1.6Ω (+1.8V Supply)
On-Resistance Match Between Channels
0.3Ω (+3V Supply)
On-Resistance Flatness
0.1Ω (+3V Supply)
Single-Supply Operation Down to 1.6V
High-Current Handling Capacity (150mA Continuous)
+1.8V CMOS-Logic Compatible
Fast Switching Times: tON = 11ns, tOFF = 4ns
Pin Compatible with Industry-Standard 74HC4051/74HC4052/74HC4053 and MAX4617/MAX4618/MAX4619
Available in 3mm x 3mm 16-Pin Thin QFN Packages
Applications
Audio Signal Routing
Battery-Operated Equipment
Communications Circuits
Low-Voltage Data-Acquisition Systems
New items
New items
New items
New items
DG412LEDQ-GE3, Vishay
Analogue Switches (Quad), DG4xx Series, Vishay Semiconductor
A quad analogue switch that features high accuracy and reduced power consumption and is suitable for applications in test equipment to computer peripherals. With single supply operation also possible, the switch is also suitable for portable instruments.
Switches and Multiplexers, Vishay Semiconductor
New items
New items
New items
AD8184ARZ, Analog Devices
Buffered Analogue Crosspoint Switches, Analog Devices
Switches and Multiplexers, Analog Devices
New items
New items