What are the shipping charges for products like USB Interface ICs?

Yes. We keep updating our stock frequently and if a product like USB Interface ICs is not in stock then we will let you know.

How do I contact the Customer Support Team?

Yes. We keep updating our stock frequently and if a product like USB Interface ICs is not in stock then we will let you know.

Where are your products like USB Interface ICs manufactured?

Yes. We keep updating our stock frequently and if a product like USB Interface ICs is not in stock then we will let you know.

Do you offer any discounts on bulk orders of products like USB Interface ICs?

Yes. We keep updating our stock frequently and if a product like USB Interface ICs is not in stock then we will let you know.

How long will it take to receive the order that I placed for USB Interface ICs?

Yes. We keep updating our stock frequently and if a product like USB Interface ICs is not in stock then we will let you know.

Are your products USB Interface ICs in stock?

Yes. We keep updating our stock frequently and if a product like USB Interface ICs is not in stock then we will let you know.

USB Interface ICs Available Online With Overnight Delivery

New items

MAX3420EETG+, Maxim Integrated

Simplifies Adding USB to Any System Microprocessor-Independent USB Solution Complies with USB Specification Revision 2.0 (Full-Speed Operation) Integrated Full-Speed USB Transceiver Firmware/Hardware Control of an Internal D+ Pullup Resistor Programmable 3- or 4-Wire 26MHz SPI Interface Intelligent USB Serial-Interface Engine (SIE) Automatically Handles USB Flow Control and Double Buffering Handles Low-Level USB Signaling Details Includes Timers for USB Time-Sensitive Operations, So SPI Master Does Not Need to Time Events Four General-Purpose Inputs and Four General-Purpose Outputs Internal Comparator Detects VBUS for Self-Powered Applications Interrupt Output Pin (Level or Programmable Edge) Allows Polled or Interrupt-Driven SPI Interface Double-Buffered Data Endpoints Increase Throughput by Allowing the SPI Master to Transfer Data Concurrently with USB Transfers Over the Same Endpoint Built-In Endpoint FIFOs EP0: CONTROL (64 Bytes) EP1: OUT, Bulk or Interrupt, 2 x 64 Bytes (Double-Buffered) EP2: IN, Bulk or Interrupt, 2 x 64 Bytes (Double-Buffered) EP3: IN, Bulk or Interrupt (64 Bytes) SETUP Data Has Its Own 8-Byte FIFO, Simplifying Firmware ESD Protection on D+, D-, and VBCOMP Improves System Reliability Applications Cameras Cell Phones Custom USB Devices Desktop Routers Instrumentation Microprocessors and DSPs MP3 Players PC Peripherals PDAs PLCs Set-Top Boxes

Product Detail

New items

MCP2221A-I/P, Microchip

Microchip Technology USB Controller The Microchip Technology PDIP package, through-hole mount 14-pin USB bridge microcontroller has a voltage rating ranging between 3V and 5.5V. This device reduces external components by integrating the USB termination resistors and the oscillator needed for USB operation. It is a USB-to-UART/I2C serial converter that enables USB connectivity in applications that have a UART and I2C interfaces. Features and Benefits Bus-powered or self-powered Data rate is 12Mbit/s Fully configurable VID and PID assignments and string descriptors General Purpose Input/Output (GPIO) pins which support clock output, ADC, DAC and interrupt detector Highly configurable Operating temperature ranges between -40°C and 85°C Supports Electrostatic Discharge (ESD) protection USB 2.0 compliant Applications Automobile engine control systems Electronic devices Embedded systems Remote control systems Certifications AEC-Q100

Product Detail

New items

BD93F10MWV-E2, ROHM

The ROHM high voltage USB Type-C power controller supports USB PD using base-band communication. It includes support for the PD policy engine and communicates with an embedded controller or the SoC via host interface. It is USB Type-C Specification Ver.1.3 compatible and USB PD specification Ver.3.0 compatible. 32Bit ARM® Cortex®-M0 processor embedded Integrated VBUS N-ch MOSFET switch gate driver Integrated VBUS discharge switch Protection voltage of CC pins is 28V Supports dead battery operation I²C interface for host communication

Product Detail

New items

FT602Q-B-T, FTDI Chip

Supports USB 3.1 GEN 1 Super Speed (5Gbps) / USB 2.0 High Speed (480Mbps) Supports USB Transfer Types: Control/Bulk/Interrupt Supports UVC version 1.1 Supports multi channel FIFO interface Supports up to 4 video input channels on the FIFO bus Supports 2 parallel slave FIFO bus protocols, 245 FIFO and Multi-channel FIFO mode, with a data burst rate up to 400MB/s with 32 bit parallel interface Built-in 16kB FIFO data buffer RAM Built-in I2C master interface for video device configuration Supports multi voltage I/O: 1.8V, 2.5V and 3.3V Internal LDO 1.0V regulator Integrated power-on-reset circuit User programmable USB descriptors Industrial operating temperature range: -40 to 85⁰C Available in compact Pb-free QFN-76 package. Applications USB 3.1 Digital Video Camera Interface USB 3.1 Digital Camera Medical/Industrial imaging devices USB 3.1 Instrumentation

Product Detail

New items

USB2512B-I/M2, Microchip

USB251xB/USB251xBi USB 2.0 Hub Controllers The Microchip USB251xB/USB251xBi family of devices are USB 2.0 Hub Controllers. These devices feature MultiTRAK™ technology that incorporates a dedicated Transaction Translator (TT) per port to maintain consistent Full-Speed data throughput regardless of the number of active downstream connections. USB251xB/USB251xBi devices are fully customisable, helping to simplify PCB layout. PortMap, PortSwap and PHYBoost features all contribute to the flexibility of these devices. Hi-Speed (480 Mbps), Full-Speed (12 Mbps) and Low-Speed (1.5 Mbps) USB communications and USB Battery Charging (Rev. 1.1) are supported on all downstream ports. Features High performance, low-power, small footprint Hub Controller IC Fully compliant with the USB 2.0 Specification Supports the USB Battery Charging specification Rev. 1.1 for Charging Downstream Ports (CDP) Available with 2, 3 or 4 downstream ports MultiTRAK™ - Provides one high-performance transaction translator per port PortMap – Flexible port mapping and disable sequencing PortSwap – Programmable USB differential-pair pin locations to align USB signal lines directly to connectors PHYBoost - Programmable USB signal drive strength for recovering signal integrity Full power management with individual or ganged power control of each downstream port Drop-in replacement for USB251x/USB251xA devices USB (Universal Serial Bus) - Microchip

Product Detail

New items

MAX3421EEHJ+, Maxim Integrated

USB Controllers, Maxim Integrated Note Please note that any defect or non – conformance of this product must be discovered and reported to RS within 20 days of purchase. USB (Universal Serial Bus), Maxim Integrated

Product Detail

New items

CY7C65621-56LTXCT, Infineon

The Infineon USB 2.0 hub controllers is an ultra low power single chip USB 2.0 hub controller with integrated upstream and downstream transceivers. USB 2.0 Hubs are high performance, low system cost solutions for USB. The Hubs integrate 1.5 kilo ohm upstream pull up resistors for full speed operation and all downstream 15 kilo ohm pull down resistors. This results in optimization of system costs by providing built in support for the USB 2.0 specification. Bus power configurations Space saving 56 pin QFN In system EEPROM programming Integrated port status indicator control Up to four downstream ports supported

Product Detail

New items

CYPD2103-20FNXIT, Infineon

The Infineon USB Type C port controller that complies with the latest USB Type C and PD standards. It provides a complete USB Type C and U1SB Power Delivery port control solution for passive cables, active cables and powered accessories. It can also be used in many upstream and downstream facing port applications. It also including M0S8 technology with a 32 bit, 48 MHz Arm Cortex M0 processor with 3 KB flash and integrates a complete Type C Transceiver including the Type C termination resistors RP, RD and RA. Integrated oscillator Integrated transceiver Low power operation Integrated timers and counters Run time reconfigurable serial communication block

Product Detail

New items

CYPD3125-40LQXIT, Infineon

The Infineon USB Type C Port Controller is a highly integrated USB Type C controller that complies with the latest USB Type C and PD standards. It provides a complete USB Type C and USB power delivery port control solution for notebooks, dongles, monitors, docking stations and power adapters. It has M0S8 technology with a 32 bit, 48 MHz ARM Cortex M0 processor with 128 KB flash, 8 KB SRAM, 20 GPIOs, full speed USB device controller, a Crypto engine for authentication, a 20 tolerant regulator, and a pair of FETs to switch a 5V supply, which powers cables. 32 bit MCU Subsystem Integrated VCONN FETs Integrated digital blocks Integrated timers and counters Dead battery detection support

Product Detail

New items

CYPD5137-40LQXIT, Infineon

The Infineon USB Type C Port Controller is a one port USB Type C controller that complies with the latest USB Type C and Power Delivery specifications. It provides a complete USB Type C and USB PD port control solution for PCs and notebooks. It includes a 32 bit, 48 MHz Arm Cortex M0 processor with 128 KB flash and integrates a complete Type C Transceiver including the Type C termination resistors Rp, Rd, and dead battery Rd termination. Fast role swap Under voltage protection Extended data messaging Overcurrent protection for VCONN Supports latest USB PD 3.0 specification

Product Detail

New items

CYUSB3014-BZXIT, Infineon

The Infineon Super Speed USB controller has a fully configurable, parallel, general programmable interface called GPIF II, which can connect to any processor, ASIC or FPGA. GPIF II is an enhanced version of the GPIF in FX2LP. It provides easy and glue less connectivity to popular interfaces, such as asynchronous SRAM, asynchronous and synchronous address data multiplexed interfaces and parallel ATA. It has integrated the USB 3.2 Gen 1 and USB 2.0 physical layers along with a 32 bit ARM926EJ S microprocessor for powerful data processing and for building custom applications. It implements an architecture that enables 375 MBps data transfer from GPIF II to the USB interface. Includes RTOS framework Fully accessible 32 bit CPU UART support of up to 4 Mbps Universal serial bus integration Selectable clock input frequencies Adapter board for video development

Product Detail

New items

CY7C65215-32LTXI, Infineon

The Infineon USB Serial dual channel bridge controller has application in medical and healthcare devices. Clocking integrated 48 MHz clock oscillator USB suspend mode for low power RoHS compliant package

Product Detail