What are the shipping charges for products like USB Interface ICs?

Yes. We keep updating our stock frequently and if a product like USB Interface ICs is not in stock then we will let you know.

How do I contact the Customer Support Team?

Yes. We keep updating our stock frequently and if a product like USB Interface ICs is not in stock then we will let you know.

Where are your products like USB Interface ICs manufactured?

Yes. We keep updating our stock frequently and if a product like USB Interface ICs is not in stock then we will let you know.

Do you offer any discounts on bulk orders of products like USB Interface ICs?

Yes. We keep updating our stock frequently and if a product like USB Interface ICs is not in stock then we will let you know.

How long will it take to receive the order that I placed for USB Interface ICs?

Yes. We keep updating our stock frequently and if a product like USB Interface ICs is not in stock then we will let you know.

Are your products USB Interface ICs in stock?

Yes. We keep updating our stock frequently and if a product like USB Interface ICs is not in stock then we will let you know.

Top Rated USB Interface ICs For Connectivity

New items

CY7C65621-56LTXCT, Infineon

The Infineon USB 2.0 hub controllers is an ultra low power single chip USB 2.0 hub controller with integrated upstream and downstream transceivers. USB 2.0 Hubs are high performance, low system cost solutions for USB. The Hubs integrate 1.5 kilo ohm upstream pull up resistors for full speed operation and all downstream 15 kilo ohm pull down resistors. This results in optimization of system costs by providing built in support for the USB 2.0 specification. Bus power configurations Space saving 56 pin QFN In system EEPROM programming Integrated port status indicator control Up to four downstream ports supported

Product Detail

New items

CYPD2103-20FNXIT, Infineon

The Infineon USB Type C port controller that complies with the latest USB Type C and PD standards. It provides a complete USB Type C and U1SB Power Delivery port control solution for passive cables, active cables and powered accessories. It can also be used in many upstream and downstream facing port applications. It also including M0S8 technology with a 32 bit, 48 MHz Arm Cortex M0 processor with 3 KB flash and integrates a complete Type C Transceiver including the Type C termination resistors RP, RD and RA. Integrated oscillator Integrated transceiver Low power operation Integrated timers and counters Run time reconfigurable serial communication block

Product Detail

New items

CYPD3125-40LQXIT, Infineon

The Infineon USB Type C Port Controller is a highly integrated USB Type C controller that complies with the latest USB Type C and PD standards. It provides a complete USB Type C and USB power delivery port control solution for notebooks, dongles, monitors, docking stations and power adapters. It has M0S8 technology with a 32 bit, 48 MHz ARM Cortex M0 processor with 128 KB flash, 8 KB SRAM, 20 GPIOs, full speed USB device controller, a Crypto engine for authentication, a 20 tolerant regulator, and a pair of FETs to switch a 5V supply, which powers cables. 32 bit MCU Subsystem Integrated VCONN FETs Integrated digital blocks Integrated timers and counters Dead battery detection support

Product Detail

New items

CYPD5137-40LQXIT, Infineon

The Infineon USB Type C Port Controller is a one port USB Type C controller that complies with the latest USB Type C and Power Delivery specifications. It provides a complete USB Type C and USB PD port control solution for PCs and notebooks. It includes a 32 bit, 48 MHz Arm Cortex M0 processor with 128 KB flash and integrates a complete Type C Transceiver including the Type C termination resistors Rp, Rd, and dead battery Rd termination. Fast role swap Under voltage protection Extended data messaging Overcurrent protection for VCONN Supports latest USB PD 3.0 specification

Product Detail

New items

CYUSB3014-BZXIT, Infineon

The Infineon Super Speed USB controller has a fully configurable, parallel, general programmable interface called GPIF II, which can connect to any processor, ASIC or FPGA. GPIF II is an enhanced version of the GPIF in FX2LP. It provides easy and glue less connectivity to popular interfaces, such as asynchronous SRAM, asynchronous and synchronous address data multiplexed interfaces and parallel ATA. It has integrated the USB 3.2 Gen 1 and USB 2.0 physical layers along with a 32 bit ARM926EJ S microprocessor for powerful data processing and for building custom applications. It implements an architecture that enables 375 MBps data transfer from GPIF II to the USB interface. Includes RTOS framework Fully accessible 32 bit CPU UART support of up to 4 Mbps Universal serial bus integration Selectable clock input frequencies Adapter board for video development

Product Detail

New items

FT4232HL, FTDI Chip

Serial I/O Peripherals, FTDI Chip

Product Detail

New items

MCP2221A-I/P, Microchip

Microchip Technology USB Controller The Microchip Technology PDIP package, through-hole mount 14-pin USB bridge microcontroller has a voltage rating ranging between 3V and 5.5V. This device reduces external components by integrating the USB termination resistors and the oscillator needed for USB operation. It is a USB-to-UART/I2C serial converter that enables USB connectivity in applications that have a UART and I2C interfaces. Features and Benefits Bus-powered or self-powered Data rate is 12Mbit/s Fully configurable VID and PID assignments and string descriptors General Purpose Input/Output (GPIO) pins which support clock output, ADC, DAC and interrupt detector Highly configurable Operating temperature ranges between -40°C and 85°C Supports Electrostatic Discharge (ESD) protection USB 2.0 compliant Applications Automobile engine control systems Electronic devices Embedded systems Remote control systems Certifications AEC-Q100

Product Detail

New items

FT4233HPQ-TRAY, FTDI Chip

The FTDI Chip FT4233HP/FT4232HP is a Hi-Speed USB device with a Type-C/PD3.0 controller that fully supports the latest USB Type-C and Power Delivery (PD) standards enabling support for power negotiation with the ability to sink or source current to a USB host device. The USB bridge function delivers 4 independent channels compatible with the existing FT4232H – Quad Hi-speed USB to multipurpose UART/MPSSE solution. Supports PD Specification 3.0 2 x USB PD 3.0 Port Support. Port 1 supports Dual Role Swap Function while Port 2 supports sink mode with charging function through to Port 1 Supports 5V3A, 9V3A, 12V3A, 15V3A, 20V3A and more PDOs as sink or source Type-C/PD Physical Layer Protocol PD policy engine using 32-bit RISC controller with 8kB data RAM and 48kB code ROM PD mode configuration through external EEPROM Options to use external MCU controlling PD policy through I2C interface Up to 8 Configurable PD GPIO pins support External MCU support through I2C bus External EEPROM support for USB device configuration and PD profile

Product Detail

New items

USB2227-NU-11, Microchip

The Microchip 4th generation USB 2.0 flash card media that provides the interface between a USB host controller and flash media cards. It is identical to the USB2228 without the support for xD-Picture Card™. It provides a single chip solution for the most popular flash memory cards in the market. The device consists of a USB 2.0 device PHY and SIE, buffers, Fast 8051 microprocessor with expanded scratchpad, and program SRAM, and CF, MS, SM and SD controllers. The device can support up to 4 slot operation. Provision for external flash Memory up to 64K bytes for program storage is provided. Customers benefit from the high quality on chip ROM code that is compatibility and compliance tested for the latest format support. NAND flash SD Card Write Protect polarity SD Card Read Only operation Bus or Self Powered USB Bus Power Certified Hardware support for SD Security Command Extensions USB Smart Detach™ when no media card is inserted for power savings 1-bit ECC correction performed in hardware for maximum efficiency Supports firmware upgrade via USB bus if boot block flash program memory is used

Product Detail

New items

USB2244I-AEZG-06, Microchip

USB224x USB 2.0 Multi Format SD/MMC & MS Flash Media Controllers The USB224x family of devices from Microchip are high-speed USB 2.0 flash media card controllers that provide an ultra-fast interface between a host USB controller and popular flash media cards. Offered is the flexibility to choose independent or simultaneous access to a wide selection of flash media readers. These devices provide secure memory format options via internal memory and are capable of high-performance throughput with new formats such as Memory Stick PRO-HG. USB224x devices integrate a USB 2.0 device transceiver, a fast 8051 microprocessor and Memory Stick™ (MS), Smart Media™ (SM) and Secure Digital (SD) controllers in a single chip. These ICs are well-suited for performance-intensive Microsoft® Windows Vista® applications such as ReadyBoost™. Features Optimized for Hi-Speed performance and versatility Supports Smart Media™/xD-Picture Card™, Memory Stick™/Memory Stick PRO™/Memory Stick PRO-HG™ and MultiMediaCard™/Secure Digital interfaces Capable of high-performance throughput > 35MB/s with new Hi-Speed formats – MS PRO-HG Well-suited for PC applications utilizing Microsoft® ReadyBoost™ to improve system performance Secure memory format options supported via internal memory Supports individual or any combination of sockets Typical Applications Desktop/Notebook PCs Multi-function Printers Digital TVs Monitors Consumer Audio/Video Devices Stand-alone Flash Media Reader/Writers Digital Picture Frames Media Players Set-top Boxes Gaming Consoles Automobile/Home Audio Systems Industrial Applications USB (Universal Serial Bus) - Microchip

Product Detail

New items