Rates
47+
£ 3.86
Products Found: 306
Showing Results For: USB Interface ICs
USB Interface ICs
FILTERS
Filters
Rates
25+
£ 4.59
100+
£ 3.97
250+
£ 3.76
Availability
898 In Stock
Showing
1 -
New Items
New items
CY7C65621-56LTXCT, Infineon
The Infineon USB 2.0 hub controllers is an ultra low power single chip USB 2.0 hub controller with integrated upstream and downstream transceivers. USB 2.0 Hubs are high performance, low system cost solutions for USB. The Hubs integrate 1.5 kilo ohm upstream pull up resistors for full speed operation and all downstream 15 kilo ohm pull down resistors. This results in optimization of system costs by providing built in support for the USB 2.0 specification.
Bus power configurations
Space saving 56 pin QFN
In system EEPROM programming
Integrated port status indicator control
Up to four downstream ports supported
New items
CYPD2103-20FNXIT, Infineon
The Infineon USB Type C port controller that complies with the latest USB Type C and PD standards. It provides a complete USB Type C and U1SB Power Delivery port control solution for passive cables, active cables and powered accessories. It can also be used in many upstream and downstream facing port applications. It also including M0S8 technology with a 32 bit, 48 MHz Arm Cortex M0 processor with 3 KB flash and integrates a complete Type C Transceiver including the Type C termination resistors RP, RD and RA.
Integrated oscillator
Integrated transceiver
Low power operation
Integrated timers and counters
Run time reconfigurable serial communication block
New items
CYPD3125-40LQXIT, Infineon
The Infineon USB Type C Port Controller is a highly integrated USB Type C controller that complies with the latest USB Type C and PD standards. It provides a complete USB Type C and USB power delivery port control solution for notebooks, dongles, monitors, docking stations and power adapters. It has M0S8 technology with a 32 bit, 48 MHz ARM Cortex M0 processor with 128 KB flash, 8 KB SRAM, 20 GPIOs, full speed USB device controller, a Crypto engine for authentication, a 20 tolerant regulator, and a pair of FETs to switch a 5V supply, which powers cables.
32 bit MCU Subsystem
Integrated VCONN FETs
Integrated digital blocks
Integrated timers and counters
Dead battery detection support
New items
CYPD5137-40LQXIT, Infineon
The Infineon USB Type C Port Controller is a one port USB Type C controller that complies with the latest USB Type C and Power Delivery specifications. It provides a complete USB Type C and USB PD port control solution for PCs and notebooks. It includes a 32 bit, 48 MHz Arm Cortex M0 processor with 128 KB flash and integrates a complete Type C Transceiver including the Type C termination resistors Rp, Rd, and dead battery Rd termination.
Fast role swap
Under voltage protection
Extended data messaging
Overcurrent protection for VCONN
Supports latest USB PD 3.0 specification
New items
CYUSB3014-BZXIT, Infineon
The Infineon Super Speed USB controller has a fully configurable, parallel, general programmable interface called GPIF II, which can connect to any processor, ASIC or FPGA. GPIF II is an enhanced version of the GPIF in FX2LP. It provides easy and glue less connectivity to popular interfaces, such as asynchronous SRAM, asynchronous and synchronous address data multiplexed interfaces and parallel ATA. It has integrated the USB 3.2 Gen 1 and USB 2.0 physical layers along with a 32 bit ARM926EJ S microprocessor for powerful data processing and for building custom applications. It implements an architecture that enables 375 MBps data transfer from GPIF II to the USB interface.
Includes RTOS framework
Fully accessible 32 bit CPU
UART support of up to 4 Mbps
Universal serial bus integration
Selectable clock input frequencies
Adapter board for video development
New items
CY7C65215-32LTXI, Infineon
The Infineon USB Serial dual channel bridge controller has application in medical and healthcare devices.
Clocking integrated 48 MHz clock oscillator
USB suspend mode for low power
RoHS compliant package
New items
CY7C65621-56LTXI, Infineon
The Infineon low power USB 2.0 hub controller is for a 2-port bus powered application. Both ports share a single transaction translator. It is available in a 56 QFN.
Windows hardware quality lab compliant
Up to four downstream ports supported
Supports bus powered and self powered modes
Integrated upstream and downstream termination resistors
New items
CY7C68013A-128AXI, Infineon
The Infineon USB controller is ideal for non-battery powered applications.
USB 2.0 USB IF Hi speed certified
Smart media standard ECC generation
New items
CYUSB3312-88LTXI, Infineon
The Infineon USB 3.0 hub controllers compliant with the USB 3.0 specification revision 1.0. It has integrated termination, pull-up and pull-down resistors and supports configuration options through pin-straps to reduce the overall BOM of the system.
Enhanced battery charging
Industrial temperature range -40 °C to +85 °C
New items
USB3320C-EZK-TR, Microchip
USB332x Series USB Transceivers with ULPI Interface
USB (Universal Serial Bus) - Microchip
New items
USB2244I-AEZG-06, Microchip
USB224x USB 2.0 Multi Format SD/MMC & MS Flash Media Controllers
The USB224x family of devices from Microchip are high-speed USB 2.0 flash media card controllers that provide an ultra-fast interface between a host USB controller and popular flash media cards. Offered is the flexibility to choose independent or simultaneous access to a wide selection of flash media readers. These devices provide secure memory format options via internal memory and are capable of high-performance throughput with new formats such as Memory Stick PRO-HG.
USB224x devices integrate a USB 2.0 device transceiver, a fast 8051 microprocessor and Memory Stick™ (MS), Smart Media™ (SM) and Secure Digital (SD) controllers in a single chip. These ICs are well-suited for performance-intensive Microsoft® Windows Vista® applications such as ReadyBoost™.
Features
Optimized for Hi-Speed performance and versatility
Supports Smart Media™/xD-Picture Card™, Memory Stick™/Memory Stick PRO™/Memory Stick PRO-HG™ and MultiMediaCard™/Secure Digital interfaces
Capable of high-performance throughput > 35MB/s with new Hi-Speed formats – MS PRO-HG
Well-suited for PC applications utilizing Microsoft® ReadyBoost™ to improve system performance
Secure memory format options supported via internal memory
Supports individual or any combination of sockets
Typical Applications
Desktop/Notebook PCs
Multi-function Printers
Digital TVs
Monitors
Consumer Audio/Video Devices
Stand-alone Flash Media Reader/Writers
Digital Picture Frames
Media Players
Set-top Boxes
Gaming Consoles
Automobile/Home Audio Systems
Industrial Applications
USB (Universal Serial Bus) - Microchip
New items
USB2422/MJ, Microchip
The Microchip USB2422 hub is a low-power, single transaction translator, hub controller IC with two downstream ports for embedded USB solutions. The Microchip hub controller can attach to an upstream port as a Hi-Speed and Full-Speed hub or as a Full-Speed only hub. The Microchip hub supports Low-Speed, Full-Speed, and Hi-Speed (when configured as a Hi-Speed hub) downstream devices on the enabled downstream ports.
High performance, low-power, small footprint hub controller IC with two downstream ports
Optimized for minimal bill-of-materials and low-cost designs
Supports the USB Battery Charging Specification, Revision 1.1
Fully integrated USB termination and pull-up/pulldown resistors
Supports a single external 3.3 V supply source, internal regulators provide 1.2 V internal core voltage
On-chip driver for 24 MHz crystal resonator or external 24 MHz clock input
ESD protection up to 6 kV on all USB pins