No Comments found.
Featured Products
Schmersal AZM200 Solenoid Interlock Switch Solenoid interlocks demand accurate alignment of actuator and de...
Schmersal AZM200 Solenoid Interlock Switch Solenoid interlocks demand accurate alignment of actuator and de...
Schmersal AZM170 Solenoid Interlock Switches The AZM170 series of solenoid interlock switches offer robust...
RDR Emergency Stop, ATEX Latching function, pull to release Ø 22.3mm panel cut out 4 J max impact energy 2 N actuating force Note Contact bloc...
TV8S 521 Safety Switch for Hinged Guards These safety switches are designed for position monitoring on hinged guard doors. Due to the nature of...
BNS 260, Miniature Coded Smallest design Actuation only possible with BPS260, available separately Left-hand or rig...
Schmersal AZM170 Solenoid Interlock Switches The AZM170 series of solenoid interlock switches offer robust...
T.C 236, Hinge Slider These switches are designed for hinged guards and have a built-in actuator lever which operates the contact block with a p...
Schmersal AZM170SK Solenoid Interlock Switches The AZM170SK series of solenoid interlock switches offer rob...
Thermoplastic enclosure RFID-technology for needs-based protection against tampering 3 different directions of actuation Door stop with magnetic...
Safety type 4 in accordance with IEC 61496-1 User-friendly parameter setting, no tools required Reliable safety concept in case of interferences...
Popular Categories For Schmersal
Popular Items
Popular items
Schmersal AZM200 Solenoid Interlock Switch
Solenoid interlocks demand accurate alignment of actuator and device, the patented AZM 200 solenoid interlock from Schmersal eliminates this problem due to newly developed sensor technology. The actuator and interlock can now have an offset of ± 5 mm and the actuator still engages the interlock. This simplifies the mounting and reduces regular maintenance and adjustment of the safety guard. As an additional installation feature, the AZM 200 has two slotted mounting holes, enabling a quick and smooth mounting on aluminium profiles or steel frames using just two screws. The slim, symmetrical design is ideally suited for installation on current profiles with a minimum width of 40 mm.
Three LED's indicate the operating state. Therefore, the operator always knows whether the door is released for unlatching. This interlock offers enormous advantages particularly for fences around hazardous areas with walk-in access. Due to the one-hand operation of the emergency handle, the hazardous area can be left quickly and safely, even during a power failure.
The AZM 200 increases machine availability through the integrated modern electronics. This is because intelligent diagnosis provides fast trouble-shooting. A fault does not lead to an immediate machine switch-off, the fault is first signalled so that the machine can be progressively shut down in a controlled manner.
The AZM 200 can even be wired in series with other AZM 200 solenoid interlocks and also with the Schmersal safety sensor CSS 180. This feature considerably reduces the wiring costs and simplifies the set-up of safety circuits.
Thermoplastic enclosure
Guard locking monitored
Electronic contact-free, coded system
Maximum length of the sensor chain 200 m
Self-monitoring series-wiring of 31 sensors
3 LEDs to show operating conditions
Sensor technology permits an offset between actuator and interlock ...
Popular items
Popular items
Schmersal AZM200 Solenoid Interlock Switch
Solenoid interlocks demand accurate alignment of actuator and device, the patented AZM 200 solenoid interlock from Schmersal eliminates this problem due to newly developed sensor technology. The actuator and interlock can now have an offset of ± 5 mm and the actuator still engages the interlock. This simplifies the mounting and reduces regular maintenance and adjustment of the safety guard. As an additional installation feature, the AZM 200 has two slotted mounting holes, enabling a quick and smooth mounting on aluminium profiles or steel frames using just two screws. The slim, symmetrical design is ideally suited for installation on current profiles with a minimum width of 40 mm.
Three LED's indicate the operating state. Therefore, the operator always knows whether the door is released for unlatching. This interlock offers enormous advantages particularly for fences around hazardous areas with walk-in access. Due to the one-hand operation of the emergency handle, the hazardous area can be left quickly and safely, even during a power failure.
The AZM 200 increases machine availability through the integrated modern electronics. This is because intelligent diagnosis provides fast trouble-shooting. A fault does not lead to an immediate machine switch-off, the fault is first signalled so that the machine can be progressively shut down in a controlled manner.
The AZM 200 can even be wired in series with other AZM 200 solenoid interlocks and also with the Schmersal safety sensor CSS 180. This feature considerably reduces the wiring costs and simplifies the set-up of safety circuits.
Thermoplastic enclosure
Guard locking monitored
Electronic contact-free, coded system
Maximum length of the sensor chain 200 m
Self-monitoring series-wiring of 31 sensors
3 LEDs to show operating conditions
Sensor technology permits an offset between actuator and interlock ...
Popular items
Schmersal AZM170 Solenoid Interlock Switches
The AZM170 series of solenoid interlock switches offer robust guard door protection within many applications. Both power to lock and unlock types of solenoid interlock are available within a range of AC/DC coil voltages to operate. These interlocks are made to withstand industrial enviroments having a high protection class rating of up to IP67 conforming to IEC/EN 60529.
Both power to lock and power to unlock types
1 x Cable entry M 20 x 1.5
Electromechanical actuation type
Dimensions: 30 x 90 x 84 mm
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing body material
High protection class rating of IP67 to IEC/EN 60529
Operating temperature: -25 → +60 °C
Note
Actuator not supplied.
Approvals
BG, USA/CAN, CCC
Standards
EN ISO 13849-1, EN 60947-5-1, BG-GS-ET-19
Popular items
RDR Emergency Stop, ATEX
Latching function, pull to release
Ø 22.3mm panel cut out
4 J max impact energy
2 N actuating force
Note
Contact block is not supplied and must be ordered separately
Standards
EN 60947-1, EN60947-5-5, EN 60947-1, EN 61241-1, EN 60079-0, EN 60079-11
Emergency Stop Pushbutton
Popular items
TV8S 521 Safety Switch for Hinged Guards
These safety switches are designed for position monitoring on hinged guard doors. Due to the nature of how this particular hinged guard door switch functions the switch and guard door hinges are indepedant from each other via a universal joint K1 (Please see RS stock number
742-0732
). These hinged guard door switches can be easily mounted to standard rail systems, allowing quick installation. They are also designed to operate with a positive break N/C contacts on either left or right opening doors, increasing the application flexibility.
Resistant metal enclosure
Good resistance to oil and petroleum spirit
Mounting independent of hinge
Dimensions: 92 mm x 81,5 mm x 27 mm
Variable mounting on hinged side
Rail-mounting possible with slot nuts
2-channel, alternating monitoring
Actuator shaft can be turned 360°
For left or right hinged doors
Push-in system (toothed shaft)
2 cable entries M 16 x 1.5
2 switches in one enclosure
Approvals
BG, USA/CAN, CCC
Standards
EN ISO 13849-1, EN 60947-5-1, BG-GS-ET-15
Hinge Switch
Popular items
BNS 260, Miniature Coded
Smallest design
Actuation only possible with BPS260, available separately
Left-hand or right-hand side versions for door-mounting
Control category up to 4 to EN954-1
IP67 protection
Connector 8 mm, 6-pole, latching interlocking
Dimensions: L13 x W26 x H36 mm
Note
Actuating magnet not included, see accessories, for example
617-5374
//
617-5380
Caution
EN60947-5-3 standard is only met if entire system consisting of safety sensor (BNS260), magnet (BPS260) and a safety monitoring module (AES) is used.
Standards
IEC/EN60947-5-3, BG-GS-ET-14
Note
Actuating magnet not included, see accessories
Standards
IEC/EN60947-5-3, BG-GS-ET-14
Caution
EN60947-5-3 standard is only met if entire system consisting of safety sensor (BNS260), magnet (BPS260) and a safety monitoring module (AES) is used.
Popular items
Schmersal AZM170 Solenoid Interlock Switches
The AZM170 series of solenoid interlock switches offer robust guard door protection within many applications. Both power to lock and unlock types of solenoid interlock are available within a range of AC/DC coil voltages to operate. These interlocks are made to withstand industrial enviroments having a high protection class rating of up to IP67 conforming to IEC/EN 60529.
Both power to lock and power to unlock types
1 x Cable entry M 20 x 1.5
Electromechanical actuation type
Dimensions: 30 x 90 x 84 mm
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing body material
High protection class rating of IP67 to IEC/EN 60529
Operating temperature: -25 → +60 °C
Note
Actuator not supplied.
Approvals
BG, USA/CAN, CCC
Standards
EN ISO 13849-1, EN 60947-5-1, BG-GS-ET-19
Popular items
T.C 236, Hinge Slider
These switches are designed for hinged guards and have a built-in actuator lever which operates the contact block with a positive mechanical linkage
N/C safety contact positively disconnected after just 4.5° rotation
Head can be turned in any one of four 90° positions
Slow action contact system
The housing with snap-on cover fastened without screws to facilitate easy connection
Note
It is important to select the correct lever model dependent upon the position of the hinge on the guard
Standards
IEC947-5-1/EN60947-5-1/DIN VDE 0660 Part 200; BG-GS-ET-15; DIN EN 50047; BS5304
Hinge Switch
Popular items
Schmersal AZM170SK Solenoid Interlock Switches
The AZM170SK series of solenoid interlock switches offer robust guard door protection within many applications. Both power to lock and unlock types of solenoid interlock are available within a range of AC/DC coil voltages to operate. These interlocks are made to withstand industrial enviroments having a high protection class rating of up to IP67 conforming to IEC/EN 60529.
Power to unlock types
1 x Cable entry M 20 x 1.5
Electromechanical actuation type
Dimensions: 100.5 x 108 x 30 mm
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing body material
High protection class rating of IP67 to IEC/EN 60529
Operating temperature: -25 → +60 °C
Approvals
BG, CCC
Standards
EN ISO 13849-1, EN 60947-5-1, BG-GS-ET-19
Popular items
Thermoplastic enclosure
RFID-technology for needs-based protection against tampering
3 different directions of actuation
Door stop with magnetic latching
Connection terminal or plug connection
Suitable for series-wiring
Repeated individual coding with RFID technology
Coding level "High" according to ISO 14119
Series-wiring unlimited
1 x connector plug M12, 8-pole
with latching
Popular items
Safety type 4 in accordance with IEC 61496-1
User-friendly parameter setting, no tools required
Reliable safety concept in case of interferences (EMC, welding sparks)
Process safety with highest availability
Integrated set-up tool
New Added Items
Added items
Schmersal AZM200 Solenoid Interlock Switch
Solenoid interlocks demand accurate alignment of actuator and device, the patented AZM 200 solenoid interlock from Schmersal eliminates this problem due to newly developed sensor technology. The actuator and interlock can now have an offset of ± 5 mm and the actuator still engages the interlock. This simplifies the mounting and reduces regular maintenance and adjustment of the safety guard. As an additional installation feature, the AZM 200 has two slotted mounting holes, enabling a quick and smooth mounting on aluminium profiles or steel frames using just two screws. The slim, symmetrical design is ideally suited for installation on current profiles with a minimum width of 40 mm.
Three LED's indicate the operating state. Therefore, the operator always knows whether the door is released for unlatching. This interlock offers enormous advantages particularly for fences around hazardous areas with walk-in access. Due to the one-hand operation of the emergency handle, the hazardous area can be left quickly and safely, even during a power failure.
The AZM 200 increases machine availability through the integrated modern electronics. This is because intelligent diagnosis provides fast trouble-shooting. A fault does not lead to an immediate machine switch-off, the fault is first signalled so that the machine can be progressively shut down in a controlled manner.
The AZM 200 can even be wired in series with other AZM 200 solenoid interlocks and also with the Schmersal safety sensor CSS 180. This feature considerably reduces the wiring costs and simplifies the set-up of safety circuits.
Thermoplastic enclosure
Guard locking monitored
Electronic contact-free, coded system
Maximum length of the sensor chain 200 m
Self-monitoring series-wiring of 31 sensors
3 LEDs to show operating conditions
Sensor technology permits an offset between actuator and interlock ...
Added items
Added items
Schmersal AZM200 Solenoid Interlock Switch
Solenoid interlocks demand accurate alignment of actuator and device, the patented AZM 200 solenoid interlock from Schmersal eliminates this problem due to newly developed sensor technology. The actuator and interlock can now have an offset of ± 5 mm and the actuator still engages the interlock. This simplifies the mounting and reduces regular maintenance and adjustment of the safety guard. As an additional installation feature, the AZM 200 has two slotted mounting holes, enabling a quick and smooth mounting on aluminium profiles or steel frames using just two screws. The slim, symmetrical design is ideally suited for installation on current profiles with a minimum width of 40 mm.
Three LED's indicate the operating state. Therefore, the operator always knows whether the door is released for unlatching. This interlock offers enormous advantages particularly for fences around hazardous areas with walk-in access. Due to the one-hand operation of the emergency handle, the hazardous area can be left quickly and safely, even during a power failure.
The AZM 200 increases machine availability through the integrated modern electronics. This is because intelligent diagnosis provides fast trouble-shooting. A fault does not lead to an immediate machine switch-off, the fault is first signalled so that the machine can be progressively shut down in a controlled manner.
The AZM 200 can even be wired in series with other AZM 200 solenoid interlocks and also with the Schmersal safety sensor CSS 180. This feature considerably reduces the wiring costs and simplifies the set-up of safety circuits.
Thermoplastic enclosure
Guard locking monitored
Electronic contact-free, coded system
Maximum length of the sensor chain 200 m
Self-monitoring series-wiring of 31 sensors
3 LEDs to show operating conditions
Sensor technology permits an offset between actuator and interlock ...
Added items
Schmersal AZM170 Solenoid Interlock Switches
The AZM170 series of solenoid interlock switches offer robust guard door protection within many applications. Both power to lock and unlock types of solenoid interlock are available within a range of AC/DC coil voltages to operate. These interlocks are made to withstand industrial enviroments having a high protection class rating of up to IP67 conforming to IEC/EN 60529.
Both power to lock and power to unlock types
1 x Cable entry M 20 x 1.5
Electromechanical actuation type
Dimensions: 30 x 90 x 84 mm
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing body material
High protection class rating of IP67 to IEC/EN 60529
Operating temperature: -25 → +60 °C
Note
Actuator not supplied.
Approvals
BG, USA/CAN, CCC
Standards
EN ISO 13849-1, EN 60947-5-1, BG-GS-ET-19
Added items
BNS 260, Miniature Coded
Smallest design
Actuation only possible with BPS260, available separately
Left-hand or right-hand side versions for door-mounting
Control category up to 4 to EN954-1
IP67 protection
Connector 8 mm, 6-pole, latching interlocking
Dimensions: L13 x W26 x H36 mm
Note
Actuating magnet not included, see accessories, for example
617-5374
//
617-5380
Caution
EN60947-5-3 standard is only met if entire system consisting of safety sensor (BNS260), magnet (BPS260) and a safety monitoring module (AES) is used.
Standards
IEC/EN60947-5-3, BG-GS-ET-14
Note
Actuating magnet not included, see accessories
Standards
IEC/EN60947-5-3, BG-GS-ET-14
Caution
EN60947-5-3 standard is only met if entire system consisting of safety sensor (BNS260), magnet (BPS260) and a safety monitoring module (AES) is used.
Added items
TV8S 521 Safety Switch for Hinged Guards
These safety switches are designed for position monitoring on hinged guard doors. Due to the nature of how this particular hinged guard door switch functions the switch and guard door hinges are indepedant from each other via a universal joint K1 (Please see RS stock number
742-0732
). These hinged guard door switches can be easily mounted to standard rail systems, allowing quick installation. They are also designed to operate with a positive break N/C contacts on either left or right opening doors, increasing the application flexibility.
Resistant metal enclosure
Good resistance to oil and petroleum spirit
Mounting independent of hinge
Dimensions: 92 mm x 81,5 mm x 27 mm
Variable mounting on hinged side
Rail-mounting possible with slot nuts
2-channel, alternating monitoring
Actuator shaft can be turned 360°
For left or right hinged doors
Push-in system (toothed shaft)
2 cable entries M 16 x 1.5
2 switches in one enclosure
Approvals
BG, USA/CAN, CCC
Standards
EN ISO 13849-1, EN 60947-5-1, BG-GS-ET-15
Hinge Switch
Added items
RDR Emergency Stop, ATEX
Latching function, pull to release
Ø 22.3mm panel cut out
4 J max impact energy
2 N actuating force
Note
Contact block is not supplied and must be ordered separately
Standards
EN 60947-1, EN60947-5-5, EN 60947-1, EN 61241-1, EN 60079-0, EN 60079-11
Emergency Stop Pushbutton
Added items
Schmersal AZM170 Solenoid Interlock Switches
The AZM170 series of solenoid interlock switches offer robust guard door protection within many applications. Both power to lock and unlock types of solenoid interlock are available within a range of AC/DC coil voltages to operate. These interlocks are made to withstand industrial enviroments having a high protection class rating of up to IP67 conforming to IEC/EN 60529.
Both power to lock and power to unlock types
1 x Cable entry M 20 x 1.5
Electromechanical actuation type
Dimensions: 30 x 90 x 84 mm
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing body material
High protection class rating of IP67 to IEC/EN 60529
Operating temperature: -25 → +60 °C
Note
Actuator not supplied.
Approvals
BG, USA/CAN, CCC
Standards
EN ISO 13849-1, EN 60947-5-1, BG-GS-ET-19
Added items
T.C 236, Hinge Slider
These switches are designed for hinged guards and have a built-in actuator lever which operates the contact block with a positive mechanical linkage
N/C safety contact positively disconnected after just 4.5° rotation
Head can be turned in any one of four 90° positions
Slow action contact system
The housing with snap-on cover fastened without screws to facilitate easy connection
Note
It is important to select the correct lever model dependent upon the position of the hinge on the guard
Standards
IEC947-5-1/EN60947-5-1/DIN VDE 0660 Part 200; BG-GS-ET-15; DIN EN 50047; BS5304
Hinge Switch
Added items
Schmersal RSS36 Non Contact Safety Switch
The RSS36 electronic safety sensor with unique diagnosis meets the highest safety requirements, even when series-wired. It also features new coding functions for the uniform allocation of the actuator to the sensor, this is realised through the integrated RFID technology. The RSS36 has three different coding variants to enable an optimal conformation to the required protection against tampering. The universal mounting features and the optional latching function provides a smooth and rational integration in separating safety guards.
Thermoplastic enclosure
Misaligned actuation possible
Dimensions: 27 x 108.2 x 35 mm
High repeat accuracy of the switching points
2 short-circuit proof PNP safety outputs
Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet
Increased protection against tampering by optional individual coding of safety sensor and actuator
Safety and diagnostic signals can be wired in series
LED status indication
Sensor with connecting cable or with integrated connector
Robust due to the used cleaning agent-resistant materials and protection class up to IP69K
Special Features
Stock no.
With latching, approx. 18 N
Individual coding
Diagnostic output
Serial diagnostic
880-1747
y
n
y
n
880-1741
n
n
y
n
880-1750
n
y
y
n
880-1753
y
y
y
n
880-1757
y
n
n
y
880-1766
n
n
n
y
Note
Actuators must be ordered separately.
Stock no.
880-1769
comes with a latching magnet.
Stock no.
880-1763
comes without a latching magnet.
Approvals
TUV, cULus, ECOLAB.
Supplied with
EN ISO 13849-1, IEC 61508, IEC 60947-5-3, EN 62061.
Added items
Schmersal RSS16 Non Contact Safety Switch
The RFID safety sensor RSS16 is based on the design of the AZ16. The versatile construction is now available as a non-contact system with wear-free RFID technology for the most demanding requirements of safety level and protection against manipulation. It has universal three-sided actuation which allows the RSS16 to be mounted in different situations. The non-contact operating principle allows a high tolerance for misaligned doors and in addition to the purely mechanical solution enables an actuation direction to the side of the sensor surface.
The robust construction of the RSS16, in the version with the magnetic latching that has an integrated damping element, allows it to be used as a door hinge with latching forces up to 60 N.
Installation benefits also offer the connectivity options built-in plug or terminal connection area with four connection openings, combined here for the first time with the Schmersal RFID technology. This allows the cable routing to be accurately assembled in a series circuit and adapted to the individual machine geometry.
Thermoplastic enclosure
3 different directions of actuation
Door stop with magnetic latching
Connection terminal or plug connection
Suitable for series-wiring
Series-wiring
Included in standard version Coding
With latching, stock nos.
880-1876
&
880-1889
, approx. 40 - 60 N
IP65, IP67 to IEC/EN 60529
Encoding level "high" according to ISO 14119 with an individual RFID code
Suitable for applications up to PL e / category 4 to EN ISO 13849-1 and SIL 3 to IEC 61508
Note
Actuator must be ordered separately.
Approvals
TUV, cULus.
Standards
EN ISO 13849-1, IEC 61508, IEC 60947-5-3, EN 62061.
Added items
Input expander / PFB
For parallel IO devices
Passive field box for series-wiring
For devices with M12 Connector, 8-pole
For up to 4 safety switchgears
Fuse protected device ports
Heavy duty version for field installation
Protection class IP67
