Rates
32+
£ 16.28
Products Found: 1556
Showing Results For: IEC Filters
IEC Filters
FILTERS
Filters
Showing
1 -
New Items
New items
5220.1023.3, Schurter
5220 Series
Schurter 5220 series C14 power entry modules are high performance IEC inlets that feature a line filter to protection class 1, and a two pole fuseholder. The 5220 series offers increased safety with a fuseholder for 5 x 20 mm fuse links.
Panel mount: Screw-on mounting from front
Protection class 1
Fuseholder for 5 x 20 mm fuse.
Plug removal necessary for fuse-link replacement
Quick connect terminals 6.3 x 0.8 mm
Approvals
IEC/UL 60950
Schurter Range
Panel mount, IEC inlet plugs with integral mains filter, ultra compact design. Fuse holders accept Ø5x20mm fuses.
New items
DD12.8111.111, Schurter
DD12 Series
Ultra Compact design
Alluminium case provides good shielding
Fuse drawer meets requirements of medical standard IEC/EN 60601-1
Ideal for application with high transient loads
Designed for standard and medical applications
Qualified for use in equioment according IEC/EN 60950
Panel mount: Screw on from front side
Quick connect teminals 6.3x0.8mm
MTBF
>2 Million hours
Capacitors
2x100nF Between lines (Class X) 2x2.2nF Between lines (Class Y)
Leakage Current
Standard
Temperature Range
-25°C to 85°C
Connectors
IEC320 input 6.3x0.8 Faston output
Note
Fuse drawer must be ordered separately
For single pole see Part No.
498-2653
or Extended Range Part No. 2508443887
For double pole see Part No.
500-6211
or Extended Range Part No. 2508443900
Approvals
VDE 40001522, UL E72928
Schurter Range
Panel mount, IEC inlet plugs with integral mains filter, ultra compact design. Fuse holders accept Ø5x20mm fuses.
New items
FN 9260-4/06, Schaffner
Double Fused FN9260
The FN9260 power entry module combines an IEC inlet, mains filter with excellent filter attenuation and fuses in a small form factor. A wide selection on amperage ratings, output connections, mounting possibilities and filters for medical applications are designed to offer you the desired solution.
Can be used in a wide range of applications such as portable electrical & electronic equipment, medical equipment, household equipment, single-phase power supplies, switch-mode power supplies and test & measurement equipment.
Versions up to 10 A are available with fuse holder for one or two fuses
Optional safety version (A type)
Complies with IEC/EN 60601-1
Snap-in versions (S type)
Approvals
UL recognised component, CSA certified, VDE
Schaffner Type FN Fused/Fused and Switched
IEC Inlet plugs with integral mains filter. Designed to filter mains borne interference where capacitors alone may prove inadequate. Connection by 250 ( 1/4 in) receptacles. (For insulating boots see typically RS stock no. 526-0724).,Accept 20 x 5mm dia. fuses. Fuses not included.
Warning
Neutral line must not be fused where it is referenced to earth.
New items
New items
New items
FN 372 2/21, Schaffner
Schaffner FN37X Series
Up to 6A current rating
IEC 950-compliant (twin fuse configurations only)
General purpose applications
With voltage selector
Operating Voltage
250Vac 50/60Hz max.
Operating Frequency
d.c. to 400Hz
Capacitors
47nF between lines (Class X)
2 x 2.2nF line to earth (Class Y)
Inductors
FN370/2/6/8
2A:0.7mH, 4A:0.3mH, 6A:0.18mH
FN379
2A:2mH
Earth Leakage Current
190mA/phase
Connectors
Mini Fast-On
Housing Style
FN370/2
Snap-Fit
FN376/8/9
Horizontal Screw-Mount
Note
Snap-in and screw mount versions available.
Approvals
UL recognised component, VDE, CSA certified, SEMKO
New items
FN 370 2/21, Schaffner
Schaffner FN37X Series
Up to 6A current rating
IEC 950-compliant (twin fuse configurations only)
General purpose applications
With voltage selector
Operating Voltage
250Vac 50/60Hz max.
Operating Frequency
d.c. to 400Hz
Capacitors
47nF between lines (Class X)
2 x 2.2nF line to earth (Class Y)
Inductors
FN370/2/6/8
2A:0.7mH, 4A:0.3mH, 6A:0.18mH
FN379
2A:2mH
Earth Leakage Current
190mA/phase
Connectors
Mini Fast-On
Housing Style
FN370/2
Snap-Fit
FN376/8/9
Horizontal Screw-Mount
Note
Snap-in and screw mount versions available.
Approvals
UL recognised component, VDE, CSA certified, SEMKO
New items
FN 370-2/22, Schaffner
Schaffner FN37X Series
Up to 6A current rating
IEC 950-compliant (twin fuse configurations only)
General purpose applications
With voltage selector
Operating Voltage
250Vac 50/60Hz max.
Operating Frequency
d.c. to 400Hz
Capacitors
47nF between lines (Class X)
2 x 2.2nF line to earth (Class Y)
Inductors
FN370/2/6/8
2A:0.7mH, 4A:0.3mH, 6A:0.18mH
FN379
2A:2mH
Earth Leakage Current
190mA/phase
Connectors
Mini Fast-On
Housing Style
FN370/2
Snap-Fit
FN376/8/9
Horizontal Screw-Mount
Note
Snap-in and screw mount versions available.
Approvals
UL recognised component, VDE, CSA certified, SEMKO
New items
FN9290-10-100, Schaffner
FN9280 & FN9290 - IEC Inlet Filter
The FN9280 & FN9290 series ultra-compact shielded IEC inlet filters with a combined dual fuse holder and 2-pole rocker switch. The flange mounting variant is supplied with a kit to fascinate either front or rear mounting using either a horizontal or vertical mounting plate. Applications for the FN9280 & FN9290 series include: portable electrical and electronic equipment; consumer goods; EDP and office equipment; single-phase power supplies; switch-mode power supplies; test and measurement equipment
Single stage filter
Good attenuation performance
Shielded construction to give protection from magnetic fields
Compact housing incorporating a dual fuse holder and a 2-pole rocker switch
Flange version supplied with horizontal and vertical screw positioned mounting plates which can be fitted to allow front or rear mounting
Snap-in version also available
Faston terminals
Schaffner FN92XX & FN32X Series
These high performance filters contain an additional capacitor to give a class X2 capacitor between live and neutral at both the filter input and output.
New items
FN9222ES1R-15-06, Schaffner
FN9222E - IEC Inlet Filter
From Schaffner the professional FN9222E series combines an IEC inlet and mains filter with excellent filter attenuation in a small form factor and integrated earth line choke. Standard IEC connector filters are a practical solution helping you to pass EMI system approval in a short time. A wide selection on amperage ratings, output connections, mounting possibilities and filters are designed to offer you the desired solution.
Can be used in a wide range of applications such as portable electrical & electronic equipment, household equipment, single-phase & switch-mode power supplies, test & measurement equipment, medical equipment & rack mounting equipment.
Excellent performance/size ratio
Integrated earth line choke
Complies with IEC/EN 60601-1
Snap-in versions (S & S1 type)
Optional wide mounting flanges
Optional medical versions (B type) available
Different output connections offering maximum flexibility for assembly
Note
Without earth line choke see FN9222 series
Approvals
UL 1283, CSA 22.2 No.8 1986, IEC/EN 60939
Schaffner Type FN92XX & FN32X Series
Schaffner FN92XX & FN32X Series
These high performance filters contain an additional capacitor to give a class X2 capacitor between live and neutral at both the filter input and output.
New items
931352100+731490002, Hirschmann
Connector Base
Industry standard
Suitable for use with GM 209 and GML 209 cable sockets
Note
These connectors are only suitable for power coupling to a fixing point or item of plant, or for internal wiring of equipment.
Type B DIN43650 & Industrial Standard Hirschmann
A comprehensive range of cable sockets and appliance connector bases typically for use with solenoid valves on pneumatic and hydraulic equipment. Housing material is glass-filled nylon making them impact resistant.,All Hirschmann appliance connectors feature terminals that can be screwed onto bare or ferruled conductors, or will accept crimp ring/fork terminals under the head of the screw.
2P+E
Ambient temperature: -40°C to +90°C
New items
FN9233S1B-8-06, Schaffner
FN9233 IEC Inlet Filter
From Schaffner the FN9233 IEC inlet filter combines an excellent IEC inlet and mains filter with excellent filter attenuation in a small form factor. Standard IEC connector filters are a practical solution helping you to pass EMI system approval in a short time. A wide selection on amperage ratings, output connections, mounting possibilities and filters for medical applications are designed to offer you the desired solution. For types with additional earth line choke please consult the FN9233E range of filters.
Can be used in a wide range of applications such as electrical & electronic equipment, household equipment, single-phase & switch-mode power supplies, test & measurement equipment, medical equipment and rack mounting equipment.
Rated currents up to 15 A
Excellent attenuation performance
Complies with IEC/EN 60601-1
Snap-in versions (S & S1 type) Hot inlet versions (HI type)
Medical versions (B type) available
Approvals
UL 1283, CSA 22.2 No.8 1986, IEC/EN 60939
Schaffner FN92XX & FN32X Series
These high performance filters contain an additional capacitor to give a class X2 capacitor between live and neutral at both the filter input and output.