No Comments found.
Featured Products
HA Inserts Male and female inserts will fit either cable hoods or base housings....
TE Connectivity M81044 Harsh Environment Wire SAE AS81044/9 (M81044/9) SAE AS81044/9 is a medium-weight w...
TE Connectivity DYNA-CRIMP Hydraulic Crimping Heads DYNA-CRIMP heavy duty hydraulic crimping heads that for...
TE Connectivity CERTI-CRIMP II Straight Action Hand Crimp Tools CERTI-CRIMP II Premium grade straight action hand t...
TE Connectivity AMPMODU MTE Contacts and Extraction/Lance Reset Tool AMPMODU MTE interchangebale wire crimp...
TE Connectivity MIC (Multiple Interlock Connectors) Shrouded PCB Header Connectors A range of MIC (Multiple Interlock Connectors) shrouded heade...
TE Connectivity AMPSEAL PCB Headers, IP67 Rated AMPSEAL automotive PCB mount headers with coloured keying,...
T90 Series PCB Relay Up to 30A Switching in SPST & 20A in SPDT Silver cadmium oxide contacts Available as an open frame relay, with a snap-on du...
TE Connectivity - W67 Series
TE Connectivity Strip Fed TERMI-POINT Clip Hand Tool TERMI-POINT strip fed tool for terminating wires onto...
Popular Categories For TE Connectivity
Categories For TE Connectivity
Popular Items
Popular items
TE Connectivity CPF Series Precision Thin Film Surface Mount Fixed Resistor 0603 Case 4.75kΩ ±0.1% 0.063W ±25ppm/°C
0603 TE Connectivity CPF Series Precision Resistors 4.02kΩ-14.7kΩ
CPF series thin film precision resistors from TE Connectivity provide high stability and close accuracy. These chip resistors have resistance tolerances down to 0.1% and Temperature Coefficient of Resistance (TCR) values as low as 15ppm/°C.
CPF precision resistors are constructed from an alumina substrate with a Nichrome (NiCr) resistor layer. They feature an electroplated tin finish that is 100% matte. Offered in a range of standard case sizes these chip resistors have uniform, accurate dimensions that enable easy placement.
Features
Temperature range of -55°C to +155°C
High stability
High precision
Accurate dimensions
Range of resistance values available to suit every application
Product Application Information
Suitable applications for CPF precision resistors include industrial controls, communications, instrumentation and medical applications.
Popular items
TE Connectivity SQM5 Series Radial Wirewound Resistor 100mΩ ±5% 5W ±300ppm/°C
5W SQM5 Series
TE Connectivity SQ series high power resistors featuring fine non-alkali ceramic cores embodied in ceramic cases and sealed with inorganic silica filler. This provides the SQ series with high insulation resistance, low surface temperature, excellent TCR and an entirely fireproof construction. The SQ series resistors are ideally suited to any application where efficient thermal performance is required.
Flameproof
Power rating of 5W at 70°C
Resistor marked with value
Overload Maximum 700V
Working Voltage 350V
Ideal for small batch production, development and R&D department
Popular items
TE Connectivity Heat Shrink Kit, Polyolefin Cable Sleeve, 3:1
Sleeving Kit 3:1 (Black)
This kit contains a selection of black adhesive lined heatshrink 3:1 ratio in a variety of popular sizes. Refilling the kit is possible using adhesive lined heatshrink in 1.2m lengths, available separately.
Kit Contents
Type
Length (mm)
Qty
Replacement
RS Stock No.
3//1
100
20
157-3789
6//2
100
20
157-3795
9//3
100
20
157-3802
12//4
150
16
157-3818
18//6
150
8
157-3824
24//8
150
6
157-3903
Popular items
TE Connectivity SQM7 Series Radial Fixed Resistor 220Ω ±5% 7W ±300ppm/°C
7W SQM7 Series
TE Connectivity SQ series high power resistors featuring fine non-alkali ceramic cores embodied in ceramic cases and sealed with inorganic silica filler. This provides the SQ series with high insulation resistance, low surface temperature, excellent TCR and an entirely fireproof construction. The SQ series resistors are ideally suited to any application where efficient thermal performance is required.
Flameproof
Power rating of 7W at 70°C
Resistor marked with value
Overload Maximum 1000V
Working Voltage 500V
Ideal for small batch production, development and R&D department
Metal Film Radial
Popular items
TE Connectivity CPF Series Thin Film Surface Mount Fixed Resistor 0805 Case 78.7kΩ ±0.1% 0.1W ±25ppm/°C
The CPF series is a high stability precision chip resistor range offering various power dissipations relating to a wide range of chip sizes. The CPF series offers TCR's down to 15ppm/°C and resistance tolerances to 0.1%. Standard values are within the IEC 63 E96 and E24 value grids. The CPF has accurate and uniform physical dimensions to facilitate placement
Thin film precision
resistors with TC's to
15ppm and tolerances to
0.05%.
Wide range of case sizes
from 0201 to 2512
Suitable for all
applications where close
accuracy and stability are
essential
Terminal finish
electroplated 100% matte
Sn
Applications
Communications
Industrial Controls
Instrumentation
Medical
Popular items
TE Connectivity CPF-A Series Thin Film Surface Mount Resistor 0805 Case 6.8kΩ 0.1% 0.1W ±25ppm/°C
0.1W Thin Film Chip Resistors, CPF-A Series 0.1% 25ppm
CPF-A Automotive Grade Thin Film chip resistor series is AEC-Q200 compliant. Supplied on tape and reel for ease of insertion, and available in 6 sizes with power ratings up to 0.5W.
Features and Benefits:
Special materials design and processing for high sulphur applications
Test proven immunity to humidity, moisture and sulphur
Operating Temperature Range: -55℃ to +155℃
Applications:
Automotive, Medical, Testing / Measurement and Communication
Popular items
TE Connectivity Black Heat Shrink Tubing 2:1, 4.8mm Sleeve Dia. x 150m, DR-25-TW Series
DR-25 Thin Wall Heat Shrink Tubing
Robust and flexible thin wall heat shrink tubing. The heat shrink protects wires and cables against damage from chemicals, abrasion, and fluids. The thin wall design allows the tubing to be used where space and weight is limited. It is ideal for use in high temperature environments as it has been specially designed for long term heat resistance and is flame retardant.
Features and Benefits
Offers excellent protection and insulation
Thin wall
Provides strain relief
Performs well under long-term heat exposure
The tubing is printed with the product description and size
Shrink ratio of 2:1
Use with System 25 range products for a complete cable harness system
Popular items
TE Connectivity SlimSeal Connector Miniature Series, Male 3 Pole 3 Way Miniature, Cable Mount, Rated At 5A, 400 V ac
TE Connectivty SlimSeal IP67 Cable Mount Plugs
From TE Connectivity, a series of miniature sealed wire to wire connectors from the Slimseal family. These IP67 compact connectors have a tough thermoplastic housing and a rubber seal making them suitable for the harshest environments. The wire to wire sealed connectors feature a press to release spring latch ensuring a secure mating function. The male and female connectors are available in two and three pole formats and three different colours for easy identification.
Features and Benefits
Compact design
Sealed to IP67 when mated
Easy assembly identification with three colour options
Pre-assembled seals saving valuable assembly time
Press to release spring latch system
Wide operating temperature range -40°C to +105°C
Applications
Outdoor lighting
Commercial refrigeration lighting
HVAC equipment
Kitchen appliances
Lighting Connectors
Popular items
TE Connectivity CRGH Series Thick Film Fixed Resistor 1206 Case 27kΩ ±5% 0.5W ±200ppm/°C
1206 Format CRGH Series Resistor 0.5W
CRGH series chip resistors are the version of the CRG in high Power version, for the same case size they are twice on the power rating at 70°C
CRGH series chip resistors are suitable for most applications, including high frequency operation, owing to the short lead structure and low capacitance
Popular items
TE Connectivity MULTILOCK 070, 20 Way, 2 Row Male Connector Housing
TE Connectivity 3.5 mm MULTILOCK 070 Series Automotive Connectors
MULTILOCK 070 series automotive connectors with a miniaturized design for use in automotive wire to wire and wire to board applications. These MULTILOCK 070 series have a compact design with high density 3.5 mm contact centres and are also durable and easy to handle. The housings of these MULTILOCK 070 automotive connectors protect the contacts against damage caused by rocking action (KOJIRI Action) that occurs at the mating and unmating stages. The MULTILOCK 070 plug and receptacle housings have a housing lance design enabling lanceless contacts to be used. The use of lanceless contacts avoids tangling and lance deformation is eliminated. The key feature of these MULTILOCK 070 connectors is the locking mechanism. The standard MULTILOCK 070 plug and receptacle housings feature an integral double lock mechanism on the wire side to ensure a secure contact retention. The MULTILOCK 070 Mk II plug housing has a locking mechanism consisting of a 2 piece double lock plate for secure contact retention and prevention of partial insertion.
The MULTILOCK 070 range of automotive connectors consists of plug and receptacle housings and PCB headers for use in wire to wire and wire to board applications. The plug housings require female crimp contacts, the receptacle housings require male tab contacts. Crimp contacts must be ordered separately.
Features and Benefits
Compact, durable design
High density 3.5 mm pitch
Housing lance design
Contacts protected against damage caused by 'KOJIRI' Action
Integral double locking system
Applications
The MULTILOCK 070 series of automotive connectors are designed for use in a range of automotive applications. These applications include powertrain systems, safety and security systems, convenience, driver information and body and chassis systems.
TE Connectivity...
Popular items
TE Connectivity transparent blue Solder Sleeve Maximum of 5.08mm
Solder Sleeves
TE Connectivity wire to wire solder sleeves are a one piece design that makes installation easy and quick. The wire splices have prefluxed solder that provides a controlled soldering process. Constructed of a transparent polyvinylidene fluoride encapsulation that offers inspectability, strain relief and insulation of wire joints.
Popular items
23E 1turn carbon track pot,470K lin 20mm
20mm Single, Switched and Dual Potentiometers
23/27E series
Rugged design with alloy housing
Choice of single, dual and rotary switch versions with linear and log track options
Direct wiring terminals
Tolerance
±20%
Rotation
267° electrical 300° mechanical
Mechanical endurance
25000 operations
Operating Temperature
-55°C → +125°C
body diameter
20.4mm
body depth
10.7mm (single) 23mm (switched), 21mm (dual)
Mounting bush
Ø 9.5mm Length 7.4mm
Insulated shaft
Ø 6.35mm (flat), Length 50mm (inc. bush)
Ø 4 mm (flat), Length 42 (inc.bush)
Power rating
Linear tracks 0.4W, Log tracks 0.2W
Switch rating
4A / 250Vac
New Items
New items
TE Connectivity GRGP Series Thick Film Resistor 0603 Case 22Ω ±1% 0.25W ±100ppm/°C
TE Connectivity is pleased to introduce this SMD Pulse withstand thick film Chip resistor, suitable for auto placement in volume and for most applications. Available in five different packages and supplied on tape and reel for automatic insertion processes.
Small size and light weight
Suitable for both wave and reflow soldering techniques
Supplied on tape
Pulse Rated
7 different package sizes
Terminal finish matte Sn over Ni
New items
TE Connectivity GRGP Series Thick Film Resistor 0603 Case 470Ω ±1% 0.25W ±100ppm/°C
TE Connectivity is pleased to introduce this SMD Pulse withstand thick film Chip resistor, suitable for auto placement in volume and for most applications. Available in five different packages and supplied on tape and reel for automatic insertion processes.
Small size and light weight
Suitable for both wave and reflow soldering techniques
Supplied on tape
Pulse Rated
7 different package sizes
Terminal finish matte Sn over Ni
New items
TE Connectivity GRGP Series Thick Film Resistor 0805 Case 39Ω ±1% 0.33W ±100ppm/°C
TE Connectivity is pleased to introduce this SMD Pulse withstand thick film Chip resistor, suitable for auto placement in volume and for most applications. Available in five different packages and supplied on tape and reel for automatic insertion processes.
Small size and light weight
Suitable for both wave and reflow soldering techniques
Supplied on tape
Pulse Rated
7 different package sizes
Terminal finish matte Sn over Ni
New items
TE Connectivity CRGP Series Thick Film Resistor 1210 Case 47kΩ ±1% 0.75W ±100ppm/°C
TE Connectivity is pleased to introduce this SMD Pulse withstand thick film Chip resistor, suitable for auto placement in volume and for most applications. Available in five different packages and supplied on tape and reel for automatic insertion processes
Small size and light weight
Suitable for both wave and reflow soldering techniques
Supplied on tape
Pulse Rated
7 different package sizes
Terminal finish matte Sn over Ni
New items
TE Connectivity Double Pole Double Throw (DPDT) Toggle Switch, (On)-On, PCB
Toggle Switches - Gemini A Series
Break before make contact timing
Epoxy sealed terminals
Stainless steel frame with brass tin plated solder support
Momentary function
(spring-loaded return):
The switch or contact breaker returns to its original position when the load is removed. E.g. bell push)
Stay-put function
:
The switch or contact breaker remains (stop) in the new position after the load has been removed.
New items
TE Connectivity 10142048-30, Temperature & Humidity Sensor -40 → +125 °C ±2%RH I2C, 6-Pin DFN
The TE Connectivity one of the smallest and most accurate humidity sensors in the market. TE Connectivity precision engineering and 20+ years of experience in humidity and temperature combination sensors, enabled this new product with fast response time, precision measurement, low hysteresis, robustness to reflow assembly process and sustained performance even when exposed to extreme temperature -40 °C to 125 °C and humidity 0% RH to 100% RH environments.
High reliability and robustness
Fast recovery after saturation
Fully compatible with reflow process
Fully interchangeable without calibration
Serial individual marking for traceability
Lead free
Low power consumption
New items
TE Connectivity 10142048-31, Temperature & Humidity Sensor -40 → 125 °C ±2%RH I2C, 6-Pin DFN
The TE Connectivity HTU31 series Humidity & Temperature Sensor is one of the smallest and most accurate humidity sensors on the market. It is enabled with new product and fast response time, precision measurement, low hysteresis, robustness to reflow assembly process and sustained performance even when exposed to extreme temperature and humidity environments.
High accuracy ±2%RH and ±0.2°C
Fast humidity response time 5s
Wide supply voltage range from 3V to 5.5V
Low average current 1μA typical
Compact 6-Pin DFN package 2.5x2.5x0.9mm
Fast I²C Interface with 2 configurable addresses
New items
TE Connectivity 400W Wire Wound Panel Mount Resistor HCH265J47RJ 5%
The TE Connectivity HCH series wire wound power chassis mount resistor. It is designed and tested to absorb high power overloads they are ideally suited to braking applications. It has resistance of 47 ohm.
High power overload capability
IP54 ingress protection
PTFE insulated
Flying Leads for flexibility of connection
New items
TE Connectivity 500W Wire Wound Panel Mount Resistor HCH335J47RJ 5%
The TE Connectivity HCH series wire wound power chassis mount resistor. It is designed and tested to absorb high power overloads they are ideally suited to braking applications. It has resistance of 47 ohm.
High power overload capability
IP54 ingress protection
PTFE insulated
Flying Leads for flexibility of connection
New items
TE Connectivity 47.5Ω 0402 (1005M) Thin Film SMD Resistor ±0.1% 0.0625W - RQ73C1E47R5BTD
These thin film precision chip resistors are constructed in a high grade raw materials and laser trimmed to give precise tolerance figures. This, coupled with the tight TCR and anti-corrosive protection layer gives us a range of resistors which are ideal not just for automotive applications, but also for medical equipment, measuring instruments and industrial applications.
SMD TaN Thin film resistor
Special passivation layer on resistive element
Sulfur resistant
New items
TE Connectivity 392Ω 0402 (1005M) Thin Film SMD Resistor ±0.1% 0.0625W - RQ73C1E392RBTD
These thin film precision chip resistors are constructed in a high grade raw materials and laser trimmed to give precise tolerance figures. This, coupled with the tight TCR and anti-corrosive protection layer gives us a range of resistors which are ideal not just for automotive applications, but also for medical equipment, measuring instruments and industrial applications.
SMD TaN Thin film resistor
Special passivation layer on resistive element
Sulfur resistant
