Enrgtech

Deliver to

United Kingdom

Categories

Brands

Part Numbers

Top Products

0

Products Found: 6222

Showing Results For: Industrial Circular Connectors

Industrial Circular Connectors

The industrial circular connector is a fault-tolerant, heavy-load lifting connector. These connectors are being used in herculean conditions; the reason is that they lead in such situations and several connections are embedded in a circular body. These connectors are typically used in automation and control systems, where they automate routine activities, processes, and industrial applications. Our latest broad range of high IP ratings, including IP67, IP68, and IP69K, are designed in a very innovative way for high rainfall or moisture environments. Circular connectors used for commercial, industrial, and automated applications are embedded with multi-pin connectors that are primarily dependent on plastic and metal housing connectors.

You can easily attach and start using our selection of industrial round connectors. Although most of our connections are pre-built, we do have a selection that requires crimping and building. They have straight or right-angle cable entry options, and both plugs and sockets are available.

Frequently used sizes of circular connectors:

  • M8
  • M9
  • M12
  • M23
  • Miniature

What are the common uses of industrial circular connectors?

Industrial circular contacts or connectors are often used for electrical signal or data transmission; the reason is to power up electrical equipment and make use of relative connector standards and specifications. In a typical situation, these connectors are manufactured to bear all sorts of data and ensure their transmission with efficient speed since this technique is mostly used to automate multi-pin connectors for simultaneous signal and data transmission. 

What are the specifications that assist you in choosing a circular connector?

Circular connections' body orientation allows for flexibility in similar circumstances and confined locations. Contact Gender: Choosing the appropriate contact gender when choosing a circular connection is a frequent source of confusion. The connector itself is not included in the contact gender; it simply refers to the contact gender.

Typical applications:

Circular industrial contacts are employed in diverse applications; some of them are included as follows:

  • Commercial and Industrial Automation and Control Systems.
  • Manufacturing industries.
  • Process Control Systems.
  • Industrial networking.
  • Measurement and instrumentation industries.

FILTERS
Filters
Showing
1 -
Enrgtech #
Manufacturer Part No
Name
Availability
Price
Rating
Rohs Verified
530811006, Jaeger
7 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 28.11
Rohs Verified
530814006, Jaeger
1 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 35.53
Rohs Verified
530106006, Jaeger
13 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 22.14
Rohs Verified
533814006, Jaeger
1 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 42.44
Rohs Verified
536856006, Jaeger
83 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 24.12
Amphenol Industrial
Rohs Verified
T3327500U, Amphenol Industrial
93 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 4.60
Rohs Verified
530824006, Jaeger
1 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 40.98
Rohs Verified
532856006, Jaeger
11 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 21.65
Rohs Verified
536356006, Jaeger
23 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 13.46
Rohs Verified
532356006, Jaeger
16 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 28.11
Rohs Verified
536353006, Jaeger
439 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 12.45
Amphenol Industrial
Rohs Verified
T3377000U, Amphenol Industrial
90 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 4.01
10 +
£ 3.77
50 +
£ 3.50
Rohs Verified
530186006, Jaeger
7 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 28.51
Rohs Verified
532353006, Jaeger
22 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 25.91
Rohs Verified
532853006, Jaeger
1 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 21.00
Rohs Verified
530810006, Jaeger
1 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 34.75
Rohs Verified
530844006, Jaeger
1 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 21.38
Rohs Verified
530183006, Jaeger
2 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 26.51
Rohs Verified
530804006, Jaeger
1 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 45.32
Rohs Verified
530834006, Jaeger
1 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 67.82
Rohs Verified
530103006, Jaeger
1 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 21.19
Rohs Verified
530847006, Jaeger
1 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 27.02
Rohs Verified
533804006, Jaeger
1 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 30.80
Rohs Verified
SCE2USB3-B-01T10MN-003-SA, Amphenol Limited
84 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 263.93
5 +
£ 252.94
10 +
£ 241.94
530,103,006, Jaeger
1 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 21.19
1 +
£ 21.19
Showing
1 -

New Items
New items
8STA60812PD, Souriau Sunbank by Eaton

8STA60812PD, Souriau Sunbank by Eaton

Souriau 8STA Series, Size 8 Plug Connectors Souriau 8STA series, size 8 plug connectors are derived from MIL-DTL-38999 specifications and developed primarily for the motorsport market, durable, lightweight plug connectors with a superb tolerance to vibration, impact and harsh environments. These Souriau 8STA motorsport connectors are small and light weight circular plug connectors suitable for Formula 1, Moto GP, WRC, Nascar, kart racing, boat racing and many other motorsports and also many other applications that require a robust circular connector such as military, including UAV, ground vehicles and Infantry interconnections where size and weight are an important design consideration. Souriau 8STA series circular plug connectors size 8 feature a colour coded banding system for easy identification and mate in 1/3 of a turn with an audible click, these motorsport developed 8STA connectors are available with male or female gender contacts in multiple contact layout versions. Shock resistance 300g for 3ms and EIA-364-27 Vibration 147m/s 2 , 10 to 2000Hz 100% scoop proof EMI-RFI Shielding Quick mating bayonet lock,1/3 turn Compact, lightweight design with colour indicator Body: Alluminium alloy, conductive black zinc plated IP67 rated (1 metre for 30 mins minimum) Grommet and seal, liquid silicone rubber Gold plated copper alloy contacts. Supplied complete with contacts and extraction tool
New items
EN3L2F16X, Switchcraft

EN3L2F16X, Switchcraft

In-line Premium construction range of cable mount connectors from Switchcraft offer the the user various pin/socket configurations to ensure your application is covered. Utilizing an integral O-Ring & gasket design, making this series suitable for a comprehensive range of applications Various termination methods available, including Solder, Crimp & Faston Note Cable connectors will mate with in-line connectors and panel connectors (plug to socket or vice-versa). In-line connectors do NOT mate with panel connectors. Switchcraft EN3 and EN2 Series Mini weather-tight connectors with integral O-ring and gasket, offering superior leakage protection and low part count. When mated or covered, the IP68 rating makes them ideal for use in process control, marine, medical instrumentation, transportation, industrial electronic applications and similar hostile environments.,A polarising keyway and 1//4 turn locking mechanism prevent misalignment and unintentional disconnection. Cable mounting assemblies feature a snap-in place strain relief mechanism. Thermoplastic rubber boots push fit over the rear of the connector and provide further strain relief for cables up to 6.7mm dia.Optional protective cap available separately for panel plugs and sockets when not in use. Body materials Panel Body and Contact Locking Disk: Thermoplastic polymer glass fibre. Interior: Thermoplastic rubber Current rating per contact in isolation 7.5A (3.0A –12 way only) Voltage rating 240V a.c. Contact resistance ≤ 3mΩ Insulation resistance 100MΩ Temperature range -40 to +65°C Contact material Copper alloy, with gold over nickel plating Termination type Solder bucket Wire gauge 20 awg (26awg – 12 way only) Matching cycles >600 Flammability rating UL94V-0 Note Cable connectors will ma...
New items
225457, ERNI

225457, ERNI

This Erni product is M12 Right angle Female Input output connector. Mainly used as M12 PCB connectors consistings of 5 pins.M12 Circular Connectors have proven to be very reliable in a variety of applications. These connectors are tailor-made for the connection of field devices of industrial automation, transportation, communications, and more. Input Output Connectors M12 PCB Connectors Orientation is Right angled Female Type connector Number of Pins are 5 Termination is THR Assembly Height is Angled
New items
0271 09, Lumberg

0271 09, Lumberg

Quicklock chassis socket, size 16, straight version, with plastic housing, solder terminals and protecting cap
New items
19.7933-21, Staubli

19.7933-21, Staubli

In combination with Staubli MULTILAM Technology, the design of the TBC plug connector ensures a dependable contact even when subjected to severe vibration and shocks. The connector is characterised by a high shock and impact resistance and a high tolerance to hydrocarbon compounds such as fossil fuels. The compact design allows applications with voltages of up to 1000 V and continuous currents of 180 A. TBC guaranteesa permanent electrical contact with low contact resistance even when subjected to vibrationsecure mechanical protection against pole reversalAdvantagesDependableShock resistantSimple handlingHigh vibration resistance due to use of MULTILAM TechnologyResistant to hydrocarbons and fuels.
New items
EN3P3MRAPCX, Switchcraft

EN3P3MRAPCX, Switchcraft

Switchcraft EN3 Series Right Angle PCB Panel Mount Connector Switchcraft EN3 series right angle PCB panel mount connectors are a range of PCB Panel mount connectors suitable for medical, lighting, marine and general electronic applications that demand a reliable connector solution. Quick mating bayonet connection and gold plated connector contacts, and PCB contacts in a thermoplastic shell feature throughout the range. Gold plated connector contacts Bayonet quick mating connection Thermoplastic connector housing Switchcraft Harsh Environment Connectors This range of Switchcraft harsh environment connectors have been designed with durability and reliability in mind, these connectors feature a secure bayonet twist locking mechanism, gold plated connector contacts and a sturdy thermoplastic connector body. These harsh environment connectors are ideally suited for use in medical, general electronic industrial, lighting and marine connector applications amongst many others.
New items
19.7944-21, Staubli

19.7944-21, Staubli

In combination with Staubli MULTILAM Technology, the design of the TBC plug connector ensures a dependable contact even when subjected to severe vibration and shocks. The connector is characterised by a high shock and impact resistance and a high tolerance to hydrocarbon compounds such as fossil fuels. The compact design allows applications with voltages of up to 1000 V and continuous currents of 180 A. TBC guaranteesa permanent electrical contact with low contact resistance even when subjected to vibrationsecure mechanical protection against pole reversalAdvantagesDependableShock resistantSimple handlingHigh vibration resistance due to use of MULTILAM TechnologyResistant to hydrocarbons and fuels.
New items
2726020000, Weidmuller

2726020000, Weidmuller

The Weidmuller single pair Ethernet is a technology that only requires one pair of wires to transmit data and power, the resulting benefits will make SPE the preferred network at the field level and beyond. Consistent Future-proof Flexible Innovative Reduced installation effort
New items
2TLA020055R1100 M12-C02, ABB

2TLA020055R1100 M12-C02, ABB

The ABB M12-C02 is the straight M12-5 male connector with cable screw connection. The cable diameter range is 2.5–6.5mm. The rated control supply voltage of cable is the 24 V. IP degree of protection is IP65
New items
C016 30D006 110 12, Amphenol

C016 30D006 110 12, Amphenol

C 16 series C 16 series cylindrical plastic connectors can be used in multiple applications in all industrial fields. Screw locking. Plugs with male or female contacts, in straight or angled versions. Protection caps for male or female connectors are available separately. C16-1 Plastic screwlocking C16-1 connectors suited to process control and industrial applications where safety is an important aspect Electrical 3 way + PE 6 way + PE Current Rating 16A @ 45°C 10A @ 45°C Voltage Rating 380Vac./450Vdc 250Vac./300Vdc Contact Resistance ≤5mΩ Insulation Resistance ≥10 6 MΩ Mechanical 3 way + PE 6 way + PE Connector Material Polyamide 6·6 Contacts Silver plated copper alloy Temperature Range -40 to +100°C Protection IP67 to DIN 40050 Termination Screw Solder Wire Conductor Size 2·5mm 2 0·75mm 2 Cable Dia. (max.) PG9 versions 9·5mm PG13·5 versions 13·5mm Flammability Rating UL94V-0 Mating Cycles >500
FAQs
We offer free shipping for orders over £200 if delivery is in the UK. All other orders in the UK, shipping from £7.99 depending on the weight and measurement. Mainland Europe shipping charges start from £25. For all other countries shipping charges start from £50 for products like Industrial Circular Connectors and all others.
You can email us directly at sales@enrgtech.co.uk or via our website for any queries regarding Industrial Circular Connectors or any other product.
This depends on the Industrial Circular Connectors individual product and information that can be found on our website.
Yes, we offer special discounts on orders above £200 for Industrial Circular Connectors and all other products.
UK orders normally take between 2/3 working days. International orders normally take between 3/5 working days for all products including Industrial Circular Connectors.
Yes. We keep updating our stock frequently and if a product like Industrial Circular Connectors is not in stock then we will let you know.