Enrgtech

Deliver to

United Kingdom

Categories

Brands

Part Numbers

Top Products

0

Products Found: 2105

Showing Results For: Crimp Contacts

Crimp Contacts

What are Crimp Contacts?

Crimp contacts are one of the key component parts of printed circuit boards (PCBs). Contacts are electrical components that are made from a conductive material. When two contacts come together, they can pass an electrical current between them. Contacts are frequently employed to configure the circuits on a printed circuit board with the help of conducting electrical current directed from the connector to the printed circuit board. These connectors are frequently embedded in a printed circuit board connector casing; usually, several connectors are installed on the spot.

How are crimp contacts used?

In order to generate circuits with the help of general printed circuit board applications, crimp connections are being used in various applications. Normally, these components are connected to a wire or cable to produce many connections. The crimping method is used to terminate crimp connections. A crimp is significant at the place where the wire and cable stay connected with the help of compression and reshaping. The most commonly used crimp techniques to perform outstandingly offer a robust and strong connection. Moreover, crimping is incorporated, and there has been directed use of a quality crimp tool to enable robust and secure connections across the nodes. Crimp connections make connections among the wires that are compatible in sizes and shapes. Normally these sorts of wires are measured with AWG standard or mm2.

What are crimps made from?

Crimps are composed of a range of different materials that include plated and many more, such as bronze, copper, and gold. The conductance and quality of connections vary because of the materials contained. Most contacts are made of plated silver or gold to make a connection robust, reliable, and fault tolerant.

What is the contact gender?

Assorted genders are available in Crimps. Here, contacts are divided into two types of the female connector and the male connector, which are normally referred to as socket and pin or plug, respectively.

Where are crimp connectors used?

Crimps offer a technique for printed circuit board connectors to link with. They are widely installed to enable PCB sockets and printed circuit board prototyping for general use. The printed circuit board is made in such a way that it must be mounted on the component. These contacts are being used to make connections between electrical components. Many electronic applications comprising these contacts, including household and industrial appliances and information and communication technology, also make use of these connectors, as do medical, automation, and control systems.

 


FILTERS
Filters
Showing
1 -
Enrgtech #
Manufacturer Part No
Name
Availability
Price
Rating
Rohs Verified
350449102, Molex
32064 In Stock
Check Stock & Lead Times Packaging Options
16000 +
£ 0.022
Rohs Verified
357450310, Molex
2998 In Stock
Check Stock & Lead Times Packaging Options
3000 +
£ 0.040
Rohs Verified
213720-1000, Molex
21998 In Stock
Check Stock & Lead Times Packaging Options
11000 +
£ 0.028
55000 +
£ 0.025
110000 +
£ 0.023
Rohs Verified
304902002, Molex
8061 In Stock
Check Stock & Lead Times Packaging Options
4000 +
£ 0.058
Rohs Verified
357450110, Molex
10078 In Stock
Check Stock & Lead Times Packaging Options
5000 +
£ 0.049
Rohs Verified
46235-5002, Molex
24030 In Stock
Check Stock & Lead Times Packaging Options
12000 +
£ 0.12
Rohs Verified
357480210, Molex
8081 In Stock
Check Stock & Lead Times Packaging Options
4000 +
£ 0.061
TE Connectivity
Rohs Verified
2350223-1, TE Connectivity
16067 In Stock
Check Stock & Lead Times Packaging Options
8000 +
£ 0.025
40000 +
£ 0.023
Rohs Verified
357470210, Molex
8080 In Stock
Check Stock & Lead Times Packaging Options
4000 +
£ 0.053
Rohs Verified
39000338, Molex
40082 In Stock
Check Stock & Lead Times Packaging Options
20000 +
£ 0.014
Rohs Verified
T2P24MC1LZ / 192990-0080, ITT Cannon
233 In Stock
Check Stock & Lead Times Packaging Options
100 +
£ 0.50
200 +
£ 0.48
400 +
£ 0.46
Rohs Verified
T3P16MC1LZ / 192991-0083, ITT Cannon
4518 In Stock
Check Stock & Lead Times Packaging Options
10 +
£ 1.06
Rohs Verified
T2P16MC1LZ / 192990-0100, ITT Cannon
3198 In Stock
Check Stock & Lead Times Packaging Options
100 +
£ 0.55
200 +
£ 0.53
400 +
£ 0.50
Rohs Verified
T3P24MC1LZ / 192991-0091, ITT Cannon
1068 In Stock
Check Stock & Lead Times Packaging Options
10 +
£ 1.19
200 +
£ 1.08
400 +
£ 0.97
Rohs Verified
BVM-42T-P2.0 (LF)(SN), JST
1248 In Stock
Check Stock & Lead Times Packaging Options
50 +
£ 0.073
500 +
£ 0.070
2500 +
£ 0.068
M20-1160046, HARWIN
20035 In Stock
Check Stock & Lead Times Packaging Options
10000 +
£ 0.031
Rohs Verified
502579-0100, Molex
2073 In Stock
Check Stock & Lead Times Packaging Options
1000 +
£ 0.044
Rohs Verified
45570-3000, Molex
2067 In Stock
Check Stock & Lead Times Packaging Options
1000 +
£ 0.057
M300-0020045, HARWIN
246 In Stock
Check Stock & Lead Times Packaging Options
100 +
£ 1.16
200 +
£ 1.07
Rohs Verified
SYF-001T-P0.6, JST
25 In Stock
Check Stock & Lead Times Packaging Options
100 +
£ 0.26
Rohs Verified
09930006261, HARTING
12 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 16.94
5 +
£ 16.41
10 +
£ 15.98
Rohs Verified
87396-8051, Molex
20086 In Stock
Check Stock & Lead Times Packaging Options
10000 +
£ 0.10
Rohs Verified
50394-8400, Molex
10079 In Stock
Check Stock & Lead Times Packaging Options
5000 +
£ 0.064
Rohs Verified
503429-0000, Molex
40078 In Stock
Check Stock & Lead Times Packaging Options
20000 +
£ 0.018
Amphenol Communications Solutions
Rohs Verified
10162697-002LF, Amphenol Communications Solutions
9998 In Stock
Check Stock & Lead Times Packaging Options
5000 +
£ 0.076
10000 +
£ 0.067
Showing
1 -

New Items
New items
47747-000LF, Amphenol FCI

47747-000LF, Amphenol FCI

CONN SOCKET 22-26AWG CRIMP TIN
New items
182207-2, TE Connectivity

182207-2, TE Connectivity

TE Connectivity AMPMODU Mod II Connector Crimp Contacts A range of crimp socket contacts for use in AMPMODU Mod II connector housings. These AMPMODU Mod II contacts are available with tin or gold plating and for wire size ranges 24 to 20 AWG and 26 to 22 AWG. Part numbers 280530-x, 181270-x and 181271-x are standard pressure contacts. Part numbers 280708-x, 281556-x, 182206-x and 182207-x are high pressure contacts 2.54mm TE Connectivity AMPMODU Mod II Interconnect System The AMPMODU Interconnect system is the signal standard for automation and control applications and is both reliable and economical. The AMPMODU Interconnect system consists of board to board, wire to board and wire to wire connectors with a compact design. When combined, these connectors can be used in a wide variety of industrial applications and systems
New items
181299-2, TE Connectivity

181299-2, TE Connectivity

TE Connectivity AMPMODU Mod I Receptacle Crimp Contacts A range of TE Connectivity AMPMODU Mod I Receptacle Crimp Contacts. For Crimp Tool see stock number 509-2010 . Contact details : 509-1988 22-18 awg (0.3-0.9mm), SCP, gold, loose 509-1994 22-18 awg (0.3-0.9mm), SCP, tin, loose 509-2004 22-18 awg (0.3-0.9mm) HCP, tin, loose 718-9747 2-18 awg (0.3-0.9mm) HCP, gold, strip 668-9381 2-18 awg (0.3-0.9mm) HCP, tin, strip 668-9384 2-18 awg (0.3-0.9mm), SCP, tin, strip 668-9387 22-18 awg (0.3-0.9mm), SCP, gold, strip 668-9390 20-17 awg(0.5-1.0mm) HCP, tin, strip 745-5845 22-18 awg (0.3-0.9mm) HCP, gold, loose 745-5097 2-18 awg (0.3-0.9mm) HCP, gold, strip TE Connectivity AMPMODU Mod I 3.96mm Interconnect System The AMPMODU Mod I 3.96 mm interconnect system is a rugged large-scale connector system with a current rating of 5 A maximum per contact and 0.79 x 1.57 mm posts. This connector system is suitable for board to board and wire to board applications and consists of PCB headers and cable mount receptacles.
New items
08-50-0113, Molex

08-50-0113, Molex

Crimp Terminal, 2759 Series KK 254 2759 Series Crimp Terminal contacts are for use with KK 2695 Series housings and KK 5051 Series housings on 22-30 AWG conductors. 2759 Series Crimp Terminal contacts include: • 670-2263 Hot Tin Dipped, reel • 172-9178 Hot Tin Dipped, loose • 670-2266 Select Gold with Nickel overall, on reel • 678-3149 Select Gold with Nickel overall, loose • 670-2276 Select Gold with Gold Flash overall, on reel • 678-3155 Select Gold with Gold Flash overall, loose Appropriate tooling for 2759 Series Crimp Terminal contacts: For Crimp Tool see stock number 663-4246 For Insertion Tool see stock number 710-6528 For Extraction Tool see stock number 173-3278 2.54mm Molex KK Range The Molex KK Interconnection System provides a simple and economical method of making multipole connections to printed circuit boards. This range of Molex KK 2.54 mm pitch wire to board connectors includes Crimp, IDT and PCB sockets and crimp terminals plus straight and 90° PCB headers as well as associated tooling. 2 to 15 way versions on 0.1in. pitch IDT sockets incorporate high pressure contacts which are ideal for daisy-chain or high vibration applications Straight friction locks help prevent accidental disconnection PCB sockets with fitted contacts have positive cantilever wipe action Socket housings 6471 Series accept crimp terminals stock no. 467-598 typically (ordered separately) Socket housings 2695 Series accept crimp terminals stock no. 670-2266 typically (ordered separately) Sockets and polarising keys available separately or as part of kit.
New items
3900-0279, Molex

3900-0279, Molex

Molex Standard .062" Crimp Terminal Contacts & Tools A range of 1.57mm Diameter Standard .062" Pin and Socket Crimp Terminal contacts available as gold-plated or tinned versions for use with receptacles housings stock number 236-2928 typically and for plug housings 236-2984 typically Note See stock number 501-051 for Ratcheting Hand Crimp Tool. See stock number 710-6499 for none ratchet type Hand Crimp Tool. See stock number 178-6935 for Insertion Tool. See stock number 178-6957 for Extraction Tool. Molex 1625 Series (0.062in./1.57mm) A range of Molex Standard .062" products that are suitable for either Power or Signal applications. Housings of the Standard .062" system are polarized and locking is by passive (friction) lock between the plug and the socket via a projection moulded on to the socket. The Standard .062" system housings take male or female round crimp terminals which allows for orientation in any direction. Current rating 5A Voltage 250V Shell material Nylon UL 94-V2 Colour Neutral (natural nylon) Temperature range -40°C to 105°C Contact Wire size 18 to 24 awg (insulation ø 1.5 to 3mm)
New items
6-87756-6, TE Connectivity

6-87756-6, TE Connectivity

Receptacle Crimp Contacts (Mod IV) A range of Receptacle Crimp Contacts for use with Mod IV shells which mate with shrouded headers. This range includes Crimps are for 32-28 or 26-22 or 24-20 AWG wires, see Table for details. Stock Number TE Part Number Wire Size & Insulation Diameter Max. Contact Plating: Mating Area, Remainder Pressure Form Mod Material 668-9725 167021-2 32-28 AWG [0.032-0.09 mm] & 1.2 mm 0.8 μm Gold, Gold Flash Intermediate Reel IV Ph Bz 668-9729 167021-3 32-28 AWG [0.032-0.09 mm] & 1.2 mm 2 μm Pre-tinned Intermediate Reel IV Ph Bz 668-9731 167301-4 24-20 AWG [0.2-0.56 mm] & 1.4 mm 0.8 μm Gold, Gold Flash Intermediate Reel IV Ph Bz 668-9735 2-167301-2 24-20 AWG [0.2-0.56 mm] & 1.4 mm 2 μm Pre-tinned Intermediate Reel IV Ph Bz 668-9738 167300-6 20-26 AWG [0.5mm max] & 1.4 mm 0.8 μm Gold, Gold Flash Standard Reel IV Ph Bz 778-0970 167300-8 20-26 AWG [0.5mm max] & 1.4 mm 0.8 μm Gold, Gold Flash Crimp Area only Standard Reel IV Ph Bz 680-2284 86016-2 24-20 AWG [0.2-0.6 mm ] & 1.75 mm 0.8 μm Gold, Gold Flash Standard Loose IV Be-Cu 680-0720 86016-3 24-20 AWG [0.2-0.6 mm ] & 1.75 mm 2 μm Pre-tinned Standard Loose IV Be-Cu 680-2281 86016-5 24-20 AWG [0.2-0.6 mm ] & 1.75 mm 0.4 μm Gold, Gold Flash Standard Loose IV Be-Cu 680-2348 87523-6 24-20 AWG [0.2-0.6 mm ] & 1.75 mm 2 μm Pre-tinned Standard Loose IV Cu-Sn-Ph-Br 718-9826 6-87523-9 24-20 AWG [0.2-0.6 mm ] & 1.75 mm 0.8 μm Gold, Tin Standard Loose IV Cu-Sn-Ph-Bz 680-2385 87667-3 26-22 AWG [0.12-0.4 mm ] & 1.55 mm 2 μm Pre-tinned Standard Loose IV Be-Cu 680-2388 87756-7 26-22 AWG [0.12-0.4 mm ] & 1.55 mm 2 μm Pre-tinned Standard Loose IV Cu-Sn-Ph-Br 718-9835 6-87756-6 26-22 AWG [0.12-0.4 mm ] & 1.55 mm 0.4 μm Gold, Tin Standard Loose IV Cu-Sn-Ph-Bz 680-0724 1-87309-3 24-20 AWG [0.2-0.6 mm ] & 1.75 mm 2 μm Pre-tinned High ...
New items
16-02-0103, Molex

16-02-0103, Molex

Molex SL Crimp Contacts, 70058, 71851 and 70021 Series A range of SL series crimp terminal contacts for use in the SL range of connector housings. For 70066 series SL crimp housings see stock number 670-3843 typically For 70066D and 70107 series SL crimp housings see stock numbers 670-3890 and 670-4098 typically A crimp tool is also available, see stock number 809-2394 Note For Reference only : 70058 and 71851 Series also used with 70450 Series Housings 2.54mm Molex C-Grid/SL Series
New items
08-70-0069, Molex

08-70-0069, Molex

KK Cat Ear Crimp Terminal, 5159 Series A range of KK 254 Cat Ear Crimp Terminal contacts, 5159 Series, for 22-28 AWG conductors. For use with KK 254 Crimp Socket Housings 2695 Series see stock number 679-5322 typical. For use with KK 254 Crimp Housings 5051 Series see stock number 687-7954 typical. Note Brass contacts stock number 720-6646 are supplied loose. Phosphor Bronze contacts stock number 720-6634 are supplied on a strip. Brass contacts stock number 720-6643 are supplied on a strip. 2.54mm Molex KK Range The Molex KK Interconnection System provides a simple and economical method of making multipole connections to printed circuit boards. This range of Molex KK 2.54 mm pitch wire to board connectors includes Crimp, IDT and PCB sockets and crimp terminals plus straight and 90° PCB headers as well as associated tooling. 2 to 15 way versions on 0.1in. pitch IDT sockets incorporate high pressure contacts which are ideal for daisy-chain or high vibration applications Straight friction locks help prevent accidental disconnection PCB sockets with fitted contacts have positive cantilever wipe action Socket housings 6471 Series accept crimp terminals stock no. 467-598 typically (ordered separately) Socket housings 2695 Series accept crimp terminals stock no. 670-2266 typically (ordered separately) Sockets and polarising keys available separately or as part of kit.
New items
35021-1001, Molex

35021-1001, Molex

2.0mm Board-In Crimp Right Angle Terminals, 35021 Series A range of 35021 Series 2.0 mm Board-In Crimp Right Angle Terminals for use in 2.0 mm pitch or 2.5 mm pitch Board-In Housings, see stock numbers 797-6547 and 720-5754 respectively. 2.0mm Wire to Board - Molex
New items
1-66099-4, TE Connectivity

1-66099-4, TE Connectivity

TE Connectivity Uninsulated Signal Contacts - Multimate Series II and III+ Multimate Series II and III+ uninsulated signal Contacts for use with rectangular M series and CPC connectors. Note Stock number 782-9851 is a reel of 4000 pieces. TE Connectivity Multimate Contacts Multimate signal contacts feature a high normal force which provides a low resistance in critical applications such as dry circuit signal conditions. Mating entry is closed-ended to prevent damage from stubbing due to misalignment. Stainless steel spring provides superior normal force and retention in the housing
New items
47750-000LF, Amphenol FCI

47750-000LF, Amphenol FCI

CONN SOCKET 22-26AWG CRIMP TIN
New items
47565-002LF, Amphenol Communications Solutions

47565-002LF, Amphenol Communications Solutions

Amphenol FCI Mini-PV Series Crimp Receptacle Contacts Mini-PV series crimp receptacle contacts for connecting discrete wire to a PCB. These PV receptacle contacts can be crimped to wire and used discretely or inserted into a MINI-LATCH crimp connector housing. These high reliability crimp receptacles are made from dual-metal enabling them to maintain contact pressure through 1000 mating cycles. The contact has a brass body which ensures a reliable gas tight crimp termination. A beryllium copper spring provides a high retention force at the mating interface. These PV series crimp receptacle contacts are available with three different spring pressures, ’Standard’ (2.35N), 'High' (4.41N) and 'Ultra high' (10.79N). These differing spring pressures allow the customization of insertion and withdrawal forces. A wide range of wire sizes and plating options for each of these spring forces are also supported. Features and Benefits • Discrete wire connections or inserted into MINI-LATCH housings • Durable dual metal construction supports 1000 mating cycles • Brass body for gas tight crimp termination • Retention spring for high mating force • Three different spring pressures for customization • Wide range of wire sizes and plating options Product Application Information The Mini-PV range of connectors are suitable for use in wide range of applications across several markets. Applications include communications, instrumentation, industrial equipment, white goods, automotive electronics, data, medical, consumer and military and avionics.
FAQs
We offer free shipping for orders over £200 if delivery is in the UK. All other orders in the UK, shipping from £7.99 depending on the weight and measurement. Mainland Europe shipping charges start from £25. For all other countries shipping charges start from £50 for products like Crimp Contacts and all others.
You can email us directly at sales@enrgtech.co.uk or via our website for any queries regarding Crimp Contacts or any other product.
This depends on the Crimp Contacts individual product and information that can be found on our website.
Yes, we offer special discounts on orders above £200 for Crimp Contacts and all other products.
UK orders normally take between 2/3 working days. International orders normally take between 3/5 working days for all products including Crimp Contacts.
Yes. We keep updating our stock frequently and if a product like Crimp Contacts is not in stock then we will let you know.