10TP series for harsh environments - Waterproof plugs
Connectors with extremely rugged design, corrosion-resistant, intended particularly for industrial applications requiring waterproof products.
Waterproof to a submerged depth of 300 metres.
Mechanical polarisation with 5 keys; screwed locking.
Simple installation and completely reparable on site.
Excellent resistance to oils, gas, sand, mud, hydrocarbons, salts, natural waste or human maltreatment.
Typical applications: geophysics, railways, civil engineering, submarine instrumentation, water treatment and heavy industry.
10TP series straight plugs, available in 2arrangements: 4 x size 16 contacts or 7x size 20 contacts.
Available in male or female version (the insulation blocks are interchangeable).
Contacts must be soldered to the wire.
Supplied with a protective sleeve, intended mainly to allow a bending radius for the output cable.
brass ASTM C 385 nickel-chrome plated; satin finish
nytralon (PA6/6 + MOS2)
for soldering, in nickel-gold plated brass
500 locking/unlocking cycles
IP 68, 5 bar service pressure on uncoupled connectors (open face); 30 bar service pressure on coupled connectors
600 V eff. 50 Hz in service class 1
Max. rating by contact
- size 20: 7 A max.
- size 16: 14 A max.
–20°C to +70°C
Length of 10TP plug:
72 mm (without rubber sleeve)
110 mm (with sleeve)
25 mm (on the locking ring)
- contact size 20: AWG 26 to 22; section 0.14 to 0.38 mm
- contact size 16: AWG 22 to 18; section 0.38 to 0.93 mm