Featured Products
FN751 Series Schaffner's FN751 series of feed-through capacitors offer a high insertion loss across a broad...
FN2010 Series Low cost chassis mount filters in an aluminium case General purpose filtering applications Co...
FN3026 Series The FN3026 Series of Din-Rail EMC/RFI Filters. A plastic housing and a metal ground plate are...
FN405 Series The FN405 PCB filter is a single-phase filter designed for easy and fast PCB-mounting. A selection o...
Double Fused FN9260 The FN9260 power entry module combines an IEC inlet, mains filter with excellent filter attenua...
FN 343 Series Two-stage General Purpose Filters Schaffner performance FN 343 EMI Filters are compact in design for...
FN 406 Series The FN406 PCB filter is a single-phase filter designed for easy, fast and compact PCB- mounting. A s...
Schaffner FN37X Series Up to 6A current rating IEC 950-compliant (twin fuse configurations only) General purpose ap...
Schaffner Type FN Fused/Fused and Switched IEC Inlet plugs with integral mains filter. Designed to filter mains bo...
FN751 Series Schaffner's FN751 series of feed-through capacitors offer a high insertion loss across a broad...
Schaffner FN5040 / FN5045 Series Schaffner FN5040 / FN5045 series output filters eliminate premature motor damage c...
Popular Categories For Schaffner
Categories For Schaffner
Popular Items
Popular items
FN7511-200-M10, Schaffner
FN751 Series
Schaffner's FN751 series of feed-through capacitors offer a high insertion loss across a broad band of frequencies from a few tens of kHz up to the GHz region. The construction of feed-through capacitors cause a better suppression performance over a much wider frequency range than a conventional two-wire capacitor of equivalent value. Different versions are available offering a wide selection on operating currents and performance levels. AC feed-through capacitors are designed and approved for up to 300 VAC 50/60 Hz operation.
IEC/EN 60384-14 approval
Rated currents from 10 → 200 A
5 kV pulse test capability
Class Y2 capacitor
Typical Aaplications: Power supplies, computer servers, medical equipment, shielded rooms and power line filter for 110/240 VAC power lines
Popular items
Popular items
FN2010B-16-06, Schaffner
FN2010 Series
Low cost chassis mount filters in an aluminium case
General purpose filtering applications
Connection by Faston type terminals
Voltage rating
250Vac 50/60Hz
Operating Frequency
DC to 400Hz
Resistance
1MΩ
Approvals
UL recognised component, CSA certified, VDE
Popular items
FN3026HL-30-71, Schaffner
FN3026 Series
The FN3026 Series of Din-Rail EMC/RFI Filters. A plastic housing and a metal ground plate are
cleverly combined to get the lowest possible product weight without compromizing EMC behavior
. All models are highly reliable and excellent quality.
Various current ratings
Chassis mount
Minimized filler leakage current
Popular items
FN 405 3/02, Schaffner
FN405 Series
The FN405 PCB filter is a single-phase filter designed for easy and fast PCB-mounting. A selection on amperage ratings are designed to offer you the desired standard product.
Can be used in a wide range of applications such as electrical & electronic equipment, small to medium-sized machines and household equipment, single-phase power supplies, switch-mode power supplies and test & measurement equipment.
Two-line filter
Plastic housing
Low profile
Good conducted attenuation performance, based on chokes with high saturation resistance and excellent thermal behaviour
PCB through hole mounting
Approvals
UL recognised, CSA Certified, VDE
Approvals
UL;CSA; VDE
Popular items
FN 9260-4/06, Schaffner
Double Fused FN9260
The FN9260 power entry module combines an IEC inlet, mains filter with excellent filter attenuation and fuses in a small form factor. A wide selection on amperage ratings, output connections, mounting possibilities and filters for medical applications are designed to offer you the desired solution.
Can be used in a wide range of applications such as portable electrical & electronic equipment, medical equipment, household equipment, single-phase power supplies, switch-mode power supplies and test & measurement equipment.
Versions up to 10 A are available with fuse holder for one or two fuses
Optional safety version (A type)
Complies with IEC/EN 60601-1
Snap-in versions (S type)
Approvals
UL recognised component, CSA certified, VDE
Schaffner Type FN Fused/Fused and Switched
IEC Inlet plugs with integral mains filter. Designed to filter mains borne interference where capacitors alone may prove inadequate. Connection by 250 ( 1/4 in) receptacles. (For insulating boots see typically RS stock no. 526-0724).,Accept 20 x 5mm dia. fuses. Fuses not included.
Warning
Neutral line must not be fused where it is referenced to earth.
Popular items
FN 343-3/05, Schaffner
FN 343 Series Two-stage General Purpose Filters
Schaffner performance FN 343 EMI Filters are compact in design for easy and fast chassis mounting. Single-phase filters provide an excellent
Attenuation performance, based on chokes with high saturation and excellent thermal behaviour. Also feature integrated earth line choke. Rated currents from 1 A to 10 A
Applications
Electrical and electronic equipment
Household equipment
Power supplies
Consumer goods
Office automation equipment
Datacom equipment
Popular items
FN 406-6/02, Schaffner
FN 406 Series
The FN406 PCB filter is a single-phase filter designed for easy, fast and compact PCB- mounting. A selection on amperage ratings and medical types are designed to offer you the desired standard product.
Can be used in a wide range of applications such as electrical & electronic equipment, small to medium-sized machines & household equipment, single-phase power supplies, switch-mode power supplies, test & measurement equipment and medical equipment.
Compact PCB-mountable design
Low profile
Optional medical versions (B type)
Good conducted attenuation performance based on chokes with high saturation resistance and excellent thermal behaviour
Approvals
UL recognised, CSA Certified, VDE
Popular items
FN 370 2/21, Schaffner
Schaffner FN37X Series
Up to 6A current rating
IEC 950-compliant (twin fuse configurations only)
General purpose applications
With voltage selector
Operating Voltage
250Vac 50/60Hz max.
Operating Frequency
d.c. to 400Hz
Capacitors
47nF between lines (Class X)
2 x 2.2nF line to earth (Class Y)
Inductors
FN370/2/6/8
2A:0.7mH, 4A:0.3mH, 6A:0.18mH
FN379
2A:2mH
Earth Leakage Current
190mA/phase
Connectors
Mini Fast-On
Housing Style
FN370/2
Snap-Fit
FN376/8/9
Horizontal Screw-Mount
Note
Snap-in and screw mount versions available.
Approvals
UL recognised component, VDE, CSA certified, SEMKO
Popular items
FN 388-6/21, Schaffner
Schaffner Type FN Fused/Fused and Switched
IEC Inlet plugs with integral mains filter. Designed to filter mains borne interference where capacitors alone may prove inadequate. Connection by 250 ( 1/4 in) receptacles. (For insulating boots see typically RS stock no. 526-0724).,Accept 20 x 5mm dia. fuses. Fuses not included.
Popular items
FN7511-100-M8, Schaffner
FN751 Series
Schaffner's FN751 series of feed-through capacitors offer a high insertion loss across a broad band of frequencies from a few tens of kHz up to the GHz region. The construction of feed-through capacitors cause a better suppression performance over a much wider frequency range than a conventional two-wire capacitor of equivalent value. Different versions are available offering a wide selection on operating currents and performance levels. AC feed-through capacitors are designed and approved for up to 300 VAC 50/60 Hz operation.
IEC/EN 60384-14 approval
Rated currents from 10 → 200 A
5 kV pulse test capability
Class Y2 capacitor
Typical Aaplications: Power supplies, computer servers, medical equipment, shielded rooms and power line filter for 110/240 VAC power lines
Popular items
FN5045-180-99, Schaffner
Schaffner FN5040 / FN5045 Series
Schaffner FN5040 / FN5045 series output filters eliminate premature motor damage caused by high DV/DT, overvoltages, cable ringing, motor overheating and eddy current losses. The output filter converts regular PWM output voltage of motor drives into a smooth sine wave with low residual ripple. Typical applications include HVAC, pumps, ventilators, conveyors, compressors, elevators, cranes and motor drives.
Smooth sine wave without voltage peaks
Reduced bearing currents
Perfect motor protection
Motor frequency up to 200 Hz
Extended motor cable length capability
New Items
New items
FN7511-200-M10, Schaffner
FN751 Series
Schaffner's FN751 series of feed-through capacitors offer a high insertion loss across a broad band of frequencies from a few tens of kHz up to the GHz region. The construction of feed-through capacitors cause a better suppression performance over a much wider frequency range than a conventional two-wire capacitor of equivalent value. Different versions are available offering a wide selection on operating currents and performance levels. AC feed-through capacitors are designed and approved for up to 300 VAC 50/60 Hz operation.
IEC/EN 60384-14 approval
Rated currents from 10 → 200 A
5 kV pulse test capability
Class Y2 capacitor
Typical Aaplications: Power supplies, computer servers, medical equipment, shielded rooms and power line filter for 110/240 VAC power lines
New items
New items
FN2010B-16-06, Schaffner
FN2010 Series
Low cost chassis mount filters in an aluminium case
General purpose filtering applications
Connection by Faston type terminals
Voltage rating
250Vac 50/60Hz
Operating Frequency
DC to 400Hz
Resistance
1MΩ
Approvals
UL recognised component, CSA certified, VDE
New items
FN 388-6/21, Schaffner
Schaffner Type FN Fused/Fused and Switched
IEC Inlet plugs with integral mains filter. Designed to filter mains borne interference where capacitors alone may prove inadequate. Connection by 250 ( 1/4 in) receptacles. (For insulating boots see typically RS stock no. 526-0724).,Accept 20 x 5mm dia. fuses. Fuses not included.
New items
FN5045-180-99, Schaffner
Schaffner FN5040 / FN5045 Series
Schaffner FN5040 / FN5045 series output filters eliminate premature motor damage caused by high DV/DT, overvoltages, cable ringing, motor overheating and eddy current losses. The output filter converts regular PWM output voltage of motor drives into a smooth sine wave with low residual ripple. Typical applications include HVAC, pumps, ventilators, conveyors, compressors, elevators, cranes and motor drives.
Smooth sine wave without voltage peaks
Reduced bearing currents
Perfect motor protection
Motor frequency up to 200 Hz
Extended motor cable length capability
New items
FN7511-100-M8, Schaffner
FN751 Series
Schaffner's FN751 series of feed-through capacitors offer a high insertion loss across a broad band of frequencies from a few tens of kHz up to the GHz region. The construction of feed-through capacitors cause a better suppression performance over a much wider frequency range than a conventional two-wire capacitor of equivalent value. Different versions are available offering a wide selection on operating currents and performance levels. AC feed-through capacitors are designed and approved for up to 300 VAC 50/60 Hz operation.
IEC/EN 60384-14 approval
Rated currents from 10 → 200 A
5 kV pulse test capability
Class Y2 capacitor
Typical Aaplications: Power supplies, computer servers, medical equipment, shielded rooms and power line filter for 110/240 VAC power lines
New items
FN3026HL-30-71, Schaffner
FN3026 Series
The FN3026 Series of Din-Rail EMC/RFI Filters. A plastic housing and a metal ground plate are
cleverly combined to get the lowest possible product weight without compromizing EMC behavior
. All models are highly reliable and excellent quality.
Various current ratings
Chassis mount
Minimized filler leakage current
New items
FN 405 3/02, Schaffner
FN405 Series
The FN405 PCB filter is a single-phase filter designed for easy and fast PCB-mounting. A selection on amperage ratings are designed to offer you the desired standard product.
Can be used in a wide range of applications such as electrical & electronic equipment, small to medium-sized machines and household equipment, single-phase power supplies, switch-mode power supplies and test & measurement equipment.
Two-line filter
Plastic housing
Low profile
Good conducted attenuation performance, based on chokes with high saturation resistance and excellent thermal behaviour
PCB through hole mounting
Approvals
UL recognised, CSA Certified, VDE
Approvals
UL;CSA; VDE
New items
FN 343-3/05, Schaffner
FN 343 Series Two-stage General Purpose Filters
Schaffner performance FN 343 EMI Filters are compact in design for easy and fast chassis mounting. Single-phase filters provide an excellent
Attenuation performance, based on chokes with high saturation and excellent thermal behaviour. Also feature integrated earth line choke. Rated currents from 1 A to 10 A
Applications
Electrical and electronic equipment
Household equipment
Power supplies
Consumer goods
Office automation equipment
Datacom equipment
New items
FN 406-6/02, Schaffner
FN 406 Series
The FN406 PCB filter is a single-phase filter designed for easy, fast and compact PCB- mounting. A selection on amperage ratings and medical types are designed to offer you the desired standard product.
Can be used in a wide range of applications such as electrical & electronic equipment, small to medium-sized machines & household equipment, single-phase power supplies, switch-mode power supplies, test & measurement equipment and medical equipment.
Compact PCB-mountable design
Low profile
Optional medical versions (B type)
Good conducted attenuation performance based on chokes with high saturation resistance and excellent thermal behaviour
Approvals
UL recognised, CSA Certified, VDE
New items
FN 370 2/21, Schaffner
Schaffner FN37X Series
Up to 6A current rating
IEC 950-compliant (twin fuse configurations only)
General purpose applications
With voltage selector
Operating Voltage
250Vac 50/60Hz max.
Operating Frequency
d.c. to 400Hz
Capacitors
47nF between lines (Class X)
2 x 2.2nF line to earth (Class Y)
Inductors
FN370/2/6/8
2A:0.7mH, 4A:0.3mH, 6A:0.18mH
FN379
2A:2mH
Earth Leakage Current
190mA/phase
Connectors
Mini Fast-On
Housing Style
FN370/2
Snap-Fit
FN376/8/9
Horizontal Screw-Mount
Note
Snap-in and screw mount versions available.
Approvals
UL recognised component, VDE, CSA certified, SEMKO
New items
FN 9260-4/06, Schaffner
Double Fused FN9260
The FN9260 power entry module combines an IEC inlet, mains filter with excellent filter attenuation and fuses in a small form factor. A wide selection on amperage ratings, output connections, mounting possibilities and filters for medical applications are designed to offer you the desired solution.
Can be used in a wide range of applications such as portable electrical & electronic equipment, medical equipment, household equipment, single-phase power supplies, switch-mode power supplies and test & measurement equipment.
Versions up to 10 A are available with fuse holder for one or two fuses
Optional safety version (A type)
Complies with IEC/EN 60601-1
Snap-in versions (S type)
Approvals
UL recognised component, CSA certified, VDE
Schaffner Type FN Fused/Fused and Switched
IEC Inlet plugs with integral mains filter. Designed to filter mains borne interference where capacitors alone may prove inadequate. Connection by 250 ( 1/4 in) receptacles. (For insulating boots see typically RS stock no. 526-0724).,Accept 20 x 5mm dia. fuses. Fuses not included.
Warning
Neutral line must not be fused where it is referenced to earth.
Don’t hesitate to ask questions for better clarification.