Featured Products
Bench Top Gas Sensor Test Chamber A compact bench-top test chamber from Figaro for use in the evaluation and testin...
Evaluation Module for TGS2444 Ammonia Gas Sensor A PCB evaluation module from Figaro for use with the TGS2444 ammon...
TGS6810 & TGS6812 Methane & LP Gas Sensors Catalytic type PCB mounting gas sensors from Figaro with high sensitivit...
Figaro FECS Series Gas Sensors A range of electrochemical sensors from Figaro for the detection of various...
Figaro Gas Sensor PCB Mounting Sockets A range of durable PCB mounting sockets suitable for Figaro gas sensors. The...
TGS2620 Organic Vapour Sensor A compact PCB mounting gas sensor from Figaro with high sensitivity to alcohol and or...
TGS813 & TGS816 Combustible Gas Sensors Combustible gas sensors from Figaro utilising tin dioxide (SnO2) se...
TGS2610/2611/2612 Methane and LP Gas Sensors Compact PCB mounting gas sensors from Figaro for use in the detection...
TGS2610/2611/2612 Methane and LP Gas Sensors Compact PCB mounting gas sensors from Figaro for use in the detection...
TGS832 Chlorofluorocarbon (CFC) Gas Sensors Gas sensors from Figaro for the detection of Chlorofluorocarbon (CFC) o...
NGM2611-E13 Methane Gas Sensor Module The NGM2611 from Figaro is a pre-calibrated sensor module for natural gas alarms which has been accurately...
TGS2610/2611/2612 Methane and LP Gas Sensors Compact PCB mounting gas sensors from Figaro for use in the detection...
Popular Categories For Figaro
Popular Items
Popular items
SR3 (100V), Figaro
Bench Top Gas Sensor Test Chamber
A compact bench-top test chamber from Figaro for use in the evaluation and testing of gas sensors. Test gases of various concentrations can be used without an additional gas supply control system and the unit has a built-in fan to ensure uniformity of gas concentration throughout the test chamber. When used with the Figaro SR-D1A test unit the chamber is suitable for use with Figaro 8-series and 26-series gas sensors as well as various pre-calibrated sensor modules.
Available in both 220V & 110V versions
Power consumption approx. 10W
Ideal for quick testing of gas sensors
Easy control of test gas concentration
Simple construction and easy operation
Internal volume 5.4 litres
Test Chambers
Popular items
EM2444, Figaro
Evaluation Module for TGS2444 Ammonia Gas Sensor
A PCB evaluation module from Figaro for use with the TGS2444 ammonia gas sensor (RS
134-6649
). The operating mode of the TGS2444 is cyclic with intermittent detection, but with this evaluation module the periodic output samples are converted into a continuous output voltage of the same value via software in the on-board microprocessor. The module requires a regulated operating supply of 5V DC.
Note
The TGS2444 Gas Sensor (RS
134-6649
) is not included with the module and must be ordered separately.
PCB Mounted Gas Sensors
Operating conditions in which Sensors are used will vary with each customer's application. Gas and oxygen sensors are not authorised for use as critical components in life support applications wherein a failure or malfunction of the products may result in injury or threat to life. Non-calibrated PCB gas sensors will not operate properly if not calibrated prior to usage.
Semiconductor gas sensors for gas detection, air quality control, HVAC, appliance and automotive industries. Characteristics of the products in this range are small size, low cost, long life, low power consumption and no maintenance requirement
Popular items
TGS6812-D00, Figaro
TGS6810 & TGS6812 Methane & LP Gas Sensors
Catalytic type PCB mounting gas sensors from Figaro with high sensitivity to both Methane and LP gases such as Butane and Propane. The TGS6812 type is also sensitive to Hydrogen making it an ideal choice for applications where leakage from stationary fuel cell systems is being monitored. Both sensors feature reduced cross sensitivity to alcohol, with a linear output and long operating life.
TGS6810 is sensitive to Methane and LP gases
TGS6812 is sensitive to Hydrogen, Methane and LP gases
PCB Mounted Gas Sensors
Operating conditions in which Sensors are used will vary with each customer's application. Gas and oxygen sensors are not authorised for use as critical components in life support applications wherein a failure or malfunction of the products may result in injury or threat to life. Non-calibrated PCB gas sensors will not operate properly if not calibrated prior to usage.
Semiconductor gas sensors for gas detection, air quality control, HVAC, appliance and automotive industries. Characteristics of the products in this range are small size, low cost, long life, low power consumption and no maintenance requirement
Popular items
FECS40-1000, Figaro
Figaro FECS Series Gas Sensors
A range of electrochemical sensors from Figaro for the detection of various gases. The FECS series of compact PCB mounting gas sensors feature a unique leak-proof construction and high selectivity of the specified gas type. The sensors have a quick response time and provide a linear output with a stable baseline level.
The following sensors are available:
FECS40-1000 - Carbon monoxide
FECS41-250 - Nitric Oxide
FECS42-20 - Nitrogen Dioxide
FECS43-20 - Sulphur Dioxide
FECS44-100 – Ammonia (low concentration)
FECS44-1000 – Ammonia (high concentration)
FECS45-10 - Chlorine
FECS50-100 - Hydrogen Sulphide
PCB Mounted Gas Sensors
Operating conditions in which Sensors are used will vary with each customer's application. Gas and oxygen sensors are not authorised for use as critical components in life support applications wherein a failure or malfunction of the products may result in injury or threat to life. Non-calibrated PCB gas sensors will not operate properly if not calibrated prior to usage.
Semiconductor gas sensors for gas detection, air quality control, HVAC, appliance and automotive industries. Characteristics of the products in this range are small size, low cost, long life, low power consumption and no maintenance requirement
Popular items
SR6, Figaro
Figaro Gas Sensor PCB Mounting Sockets
A range of durable PCB mounting sockets suitable for Figaro gas sensors. The sockets hold the sensors securely in place and can be used for over 100 insertion and removal cycles. The following types are available:
SR2 for TGS8xx Gas Sensors (6-pin)
SR4 for TGS8xx Gas Sensors (6-pin with mounting ears)
SR6 for TGS24xx & TGS26xx Gas Sensors (4-pin with locking tabs)
SR8 for TGS38xx Gas Sensors (3-pin polarised)
PCB Mounted Gas Sensors
Operating conditions in which Sensors are used will vary with each customer's application. Gas and oxygen sensors are not authorised for use as critical components in life support applications wherein a failure or malfunction of the products may result in injury or threat to life. Non-calibrated PCB gas sensors will not operate properly if not calibrated prior to usage.
Semiconductor gas sensors for gas detection, air quality control, HVAC, appliance and automotive industries. Characteristics of the products in this range are small size, low cost, long life, low power consumption and no maintenance requirement
Popular items
TGS2620-C00, Figaro
TGS2620 Organic Vapour Sensor
A compact PCB mounting gas sensor from Figaro with high sensitivity to alcohol and organic solvent vapours.
Low power consumption
Long life and low cost
Uses simple electrical circuit
PCB Mounted Gas Sensors
Operating conditions in which Sensors are used will vary with each customer's application. Gas and oxygen sensors are not authorised for use as critical components in life support applications wherein a failure or malfunction of the products may result in injury or threat to life. Non-calibrated PCB gas sensors will not operate properly if not calibrated prior to usage.
Semiconductor gas sensors for gas detection, air quality control, HVAC, appliance and automotive industries. Characteristics of the products in this range are small size, low cost, long life, low power consumption and no maintenance requirement
Popular items
TGS816-A00, Figaro
TGS813 & TGS816 Combustible Gas Sensors
Combustible gas sensors from Figaro utilising tin dioxide (SnO2) semiconductor technology providing an output proportion to gas concentration. These low cost sensors can detect a wide range of combustible gases making them an ideal choice for a wide variety of applications. Type TGS813 has a nylon 66 housing and base; type TGS816 has a metal housing with a ceramic base which is capable of withstanding temperatures of up to 200°C. Typical applications include domestic gas leak detectors and alarms, and portable gas detectors.
High sensitivity to methane, propane and butane
Long life and low cost
Utilises simple electrical circuit
PCB Mounted Gas Sensors
Operating conditions in which Sensors are used will vary with each customer's application. Gas and oxygen sensors are not authorised for use as critical components in life support applications wherein a failure or malfunction of the products may result in injury or threat to life. Non-calibrated PCB gas sensors will not operate properly if not calibrated prior to usage.
Semiconductor gas sensors for gas detection, air quality control, HVAC, appliance and automotive industries. Characteristics of the products in this range are small size, low cost, long life, low power consumption and no maintenance requirement
Popular items
TGS2610-D00, Figaro
TGS2610/2611/2612 Methane and LP Gas Sensors
Compact PCB mounting gas sensors from Figaro for use in the detection of methane and LP (liquefied petroleum) gas products. Type TGS2610 has high sensitivity to LP gas and its components such as propane and butane; type TGS2611 has high sensitivity to methane; TGS2612 has high sensitivity to methane, propane and butane with similar sensitivity (at same %LEL levels) for both methane and LP gases. Parts with suffix –C00 have a smaller package size with a faster response time; parts with –D00 & -E00 suffix have a larger package incorporating filter materials to reduce the effects of interference gases.
Compact 4-lead TO-5 package
Low power consumption
Long life and low cost
Uses simple electrical circuit
PCB Mounted Gas Sensors
Operating conditions in which Sensors are used will vary with each customer's application. Gas and oxygen sensors are not authorised for use as critical components in life support applications wherein a failure or malfunction of the products may result in injury or threat to life. Non-calibrated PCB gas sensors will not operate properly if not calibrated prior to usage.
Semiconductor gas sensors for gas detection, air quality control, HVAC, appliance and automotive industries. Characteristics of the products in this range are small size, low cost, long life, low power consumption and no maintenance requirement
Popular items
TGS2611-E00, Figaro
TGS2610/2611/2612 Methane and LP Gas Sensors
Compact PCB mounting gas sensors from Figaro for use in the detection of methane and LP (liquefied petroleum) gas products. Type TGS2610 has high sensitivity to LP gas and its components such as propane and butane; type TGS2611 has high sensitivity to methane; TGS2612 has high sensitivity to methane, propane and butane with similar sensitivity (at same %LEL levels) for both methane and LP gases. Parts with suffix –C00 have a smaller package size with a faster response time; parts with –D00 & -E00 suffix have a larger package incorporating filter materials to reduce the effects of interference gases.
Compact 4-lead TO-5 package
Low power consumption
Long life and low cost
Uses simple electrical circuit
PCB Mounted Gas Sensors
Operating conditions in which Sensors are used will vary with each customer's application. Gas and oxygen sensors are not authorised for use as critical components in life support applications wherein a failure or malfunction of the products may result in injury or threat to life. Non-calibrated PCB gas sensors will not operate properly if not calibrated prior to usage.
Semiconductor gas sensors for gas detection, air quality control, HVAC, appliance and automotive industries. Characteristics of the products in this range are small size, low cost, long life, low power consumption and no maintenance requirement
Popular items
TGS832-F01, Figaro
TGS832 Chlorofluorocarbon (CFC) Gas Sensors
Gas sensors from Figaro for the detection of Chlorofluorocarbon (CFC) or Halocarbon gases. These devices utilise tin dioxide (SnO2) semiconductor technology to provide an output proportion to gas concentration. The sensors have high sensitivity to the refrigerant gases commonly used in air conditioning systems and refrigerators, such as R-134a, R-404a, R-407c and R-410.
Type TGS832-A00 has a gas diffusion hole in the sensor cap as well as in the sensor base and by using the sensor with a suction pump, response speed can be accelerated, making it suitable for portable gas leakage checkers.
Type TGS832-F01 uses filter material in its housing to eliminate the influence of interference gases such as alcohol, resulting in a highly selective response to CFCs. This feature makes the sensor ideal for stationary type leakage detectors which require durability and a high degree of resistance to interference gases.
PCB Mounted Gas Sensors
Operating conditions in which Sensors are used will vary with each customer's application. Gas and oxygen sensors are not authorised for use as critical components in life support applications wherein a failure or malfunction of the products may result in injury or threat to life. Non-calibrated PCB gas sensors will not operate properly if not calibrated prior to usage.
Semiconductor gas sensors for gas detection, air quality control, HVAC, appliance and automotive industries. Characteristics of the products in this range are small size, low cost, long life, low power consumption and no maintenance requirement
Popular items
NGM2611, Figaro
NGM2611-E13 Methane Gas Sensor Module
The NGM2611 from Figaro is a pre-calibrated sensor module for natural gas alarms which has been accurately calibrated in Figaros temperature and humidity controlled facility. The module uses the TGS2611-E00 gas sensor which incorporates a filter to reduce the influence of interference gases such as alcohol, resulting in highly selective response to methane. The module is designed to meet the performance requirements of EN50194 and UL1484.
Factory calibrated
Temperature compensation circuit
5V operating voltage
Compact module size
Meets RoHS regulations
PCB Mounted Gas Sensors
Operating conditions in which Sensors are used will vary with each customer's application. Gas and oxygen sensors are not authorised for use as critical components in life support applications wherein a failure or malfunction of the products may result in injury or threat to life. Non-calibrated PCB gas sensors will not operate properly if not calibrated prior to usage.
Semiconductor gas sensors for gas detection, air quality control, HVAC, appliance and automotive industries. Characteristics of the products in this range are small size, low cost, long life, low power consumption and no maintenance requirement
Popular items
TGS2612-D00, Figaro
TGS2610/2611/2612 Methane and LP Gas Sensors
Compact PCB mounting gas sensors from Figaro for use in the detection of methane and LP (liquefied petroleum) gas products. Type TGS2610 has high sensitivity to LP gas and its components such as propane and butane; type TGS2611 has high sensitivity to methane; TGS2612 has high sensitivity to methane, propane and butane with similar sensitivity (at same %LEL levels) for both methane and LP gases. Parts with suffix –C00 have a smaller package size with a faster response time; parts with –D00 & -E00 suffix have a larger package incorporating filter materials to reduce the effects of interference gases.
Compact 4-lead TO-5 package
Low power consumption
Long life and low cost
Uses simple electrical circuit
PCB Mounted Gas Sensors
Operating conditions in which Sensors are used will vary with each customer's application. Gas and oxygen sensors are not authorised for use as critical components in life support applications wherein a failure or malfunction of the products may result in injury or threat to life. Non-calibrated PCB gas sensors will not operate properly if not calibrated prior to usage.
Semiconductor gas sensors for gas detection, air quality control, HVAC, appliance and automotive industries. Characteristics of the products in this range are small size, low cost, long life, low power consumption and no maintenance requirement
New Items
New items
EM2444, Figaro
Evaluation Module for TGS2444 Ammonia Gas Sensor
A PCB evaluation module from Figaro for use with the TGS2444 ammonia gas sensor (RS
134-6649
). The operating mode of the TGS2444 is cyclic with intermittent detection, but with this evaluation module the periodic output samples are converted into a continuous output voltage of the same value via software in the on-board microprocessor. The module requires a regulated operating supply of 5V DC.
Note
The TGS2444 Gas Sensor (RS
134-6649
) is not included with the module and must be ordered separately.
PCB Mounted Gas Sensors
Operating conditions in which Sensors are used will vary with each customer's application. Gas and oxygen sensors are not authorised for use as critical components in life support applications wherein a failure or malfunction of the products may result in injury or threat to life. Non-calibrated PCB gas sensors will not operate properly if not calibrated prior to usage.
Semiconductor gas sensors for gas detection, air quality control, HVAC, appliance and automotive industries. Characteristics of the products in this range are small size, low cost, long life, low power consumption and no maintenance requirement
New items
SR3 (100V), Figaro
Bench Top Gas Sensor Test Chamber
A compact bench-top test chamber from Figaro for use in the evaluation and testing of gas sensors. Test gases of various concentrations can be used without an additional gas supply control system and the unit has a built-in fan to ensure uniformity of gas concentration throughout the test chamber. When used with the Figaro SR-D1A test unit the chamber is suitable for use with Figaro 8-series and 26-series gas sensors as well as various pre-calibrated sensor modules.
Available in both 220V & 110V versions
Power consumption approx. 10W
Ideal for quick testing of gas sensors
Easy control of test gas concentration
Simple construction and easy operation
Internal volume 5.4 litres
Test Chambers
New items
FECS40-1000, Figaro
Figaro FECS Series Gas Sensors
A range of electrochemical sensors from Figaro for the detection of various gases. The FECS series of compact PCB mounting gas sensors feature a unique leak-proof construction and high selectivity of the specified gas type. The sensors have a quick response time and provide a linear output with a stable baseline level.
The following sensors are available:
FECS40-1000 - Carbon monoxide
FECS41-250 - Nitric Oxide
FECS42-20 - Nitrogen Dioxide
FECS43-20 - Sulphur Dioxide
FECS44-100 – Ammonia (low concentration)
FECS44-1000 – Ammonia (high concentration)
FECS45-10 - Chlorine
FECS50-100 - Hydrogen Sulphide
PCB Mounted Gas Sensors
Operating conditions in which Sensors are used will vary with each customer's application. Gas and oxygen sensors are not authorised for use as critical components in life support applications wherein a failure or malfunction of the products may result in injury or threat to life. Non-calibrated PCB gas sensors will not operate properly if not calibrated prior to usage.
Semiconductor gas sensors for gas detection, air quality control, HVAC, appliance and automotive industries. Characteristics of the products in this range are small size, low cost, long life, low power consumption and no maintenance requirement
New items
SR6, Figaro
Figaro Gas Sensor PCB Mounting Sockets
A range of durable PCB mounting sockets suitable for Figaro gas sensors. The sockets hold the sensors securely in place and can be used for over 100 insertion and removal cycles. The following types are available:
SR2 for TGS8xx Gas Sensors (6-pin)
SR4 for TGS8xx Gas Sensors (6-pin with mounting ears)
SR6 for TGS24xx & TGS26xx Gas Sensors (4-pin with locking tabs)
SR8 for TGS38xx Gas Sensors (3-pin polarised)
PCB Mounted Gas Sensors
Operating conditions in which Sensors are used will vary with each customer's application. Gas and oxygen sensors are not authorised for use as critical components in life support applications wherein a failure or malfunction of the products may result in injury or threat to life. Non-calibrated PCB gas sensors will not operate properly if not calibrated prior to usage.
Semiconductor gas sensors for gas detection, air quality control, HVAC, appliance and automotive industries. Characteristics of the products in this range are small size, low cost, long life, low power consumption and no maintenance requirement
New items
TGS2620-C00, Figaro
TGS2620 Organic Vapour Sensor
A compact PCB mounting gas sensor from Figaro with high sensitivity to alcohol and organic solvent vapours.
Low power consumption
Long life and low cost
Uses simple electrical circuit
PCB Mounted Gas Sensors
Operating conditions in which Sensors are used will vary with each customer's application. Gas and oxygen sensors are not authorised for use as critical components in life support applications wherein a failure or malfunction of the products may result in injury or threat to life. Non-calibrated PCB gas sensors will not operate properly if not calibrated prior to usage.
Semiconductor gas sensors for gas detection, air quality control, HVAC, appliance and automotive industries. Characteristics of the products in this range are small size, low cost, long life, low power consumption and no maintenance requirement
New items
TGS816-A00, Figaro
TGS813 & TGS816 Combustible Gas Sensors
Combustible gas sensors from Figaro utilising tin dioxide (SnO2) semiconductor technology providing an output proportion to gas concentration. These low cost sensors can detect a wide range of combustible gases making them an ideal choice for a wide variety of applications. Type TGS813 has a nylon 66 housing and base; type TGS816 has a metal housing with a ceramic base which is capable of withstanding temperatures of up to 200°C. Typical applications include domestic gas leak detectors and alarms, and portable gas detectors.
High sensitivity to methane, propane and butane
Long life and low cost
Utilises simple electrical circuit
PCB Mounted Gas Sensors
Operating conditions in which Sensors are used will vary with each customer's application. Gas and oxygen sensors are not authorised for use as critical components in life support applications wherein a failure or malfunction of the products may result in injury or threat to life. Non-calibrated PCB gas sensors will not operate properly if not calibrated prior to usage.
Semiconductor gas sensors for gas detection, air quality control, HVAC, appliance and automotive industries. Characteristics of the products in this range are small size, low cost, long life, low power consumption and no maintenance requirement
New items
TGS6812-D00, Figaro
TGS6810 & TGS6812 Methane & LP Gas Sensors
Catalytic type PCB mounting gas sensors from Figaro with high sensitivity to both Methane and LP gases such as Butane and Propane. The TGS6812 type is also sensitive to Hydrogen making it an ideal choice for applications where leakage from stationary fuel cell systems is being monitored. Both sensors feature reduced cross sensitivity to alcohol, with a linear output and long operating life.
TGS6810 is sensitive to Methane and LP gases
TGS6812 is sensitive to Hydrogen, Methane and LP gases
PCB Mounted Gas Sensors
Operating conditions in which Sensors are used will vary with each customer's application. Gas and oxygen sensors are not authorised for use as critical components in life support applications wherein a failure or malfunction of the products may result in injury or threat to life. Non-calibrated PCB gas sensors will not operate properly if not calibrated prior to usage.
Semiconductor gas sensors for gas detection, air quality control, HVAC, appliance and automotive industries. Characteristics of the products in this range are small size, low cost, long life, low power consumption and no maintenance requirement
New items
TGS2610-D00, Figaro
TGS2610/2611/2612 Methane and LP Gas Sensors
Compact PCB mounting gas sensors from Figaro for use in the detection of methane and LP (liquefied petroleum) gas products. Type TGS2610 has high sensitivity to LP gas and its components such as propane and butane; type TGS2611 has high sensitivity to methane; TGS2612 has high sensitivity to methane, propane and butane with similar sensitivity (at same %LEL levels) for both methane and LP gases. Parts with suffix –C00 have a smaller package size with a faster response time; parts with –D00 & -E00 suffix have a larger package incorporating filter materials to reduce the effects of interference gases.
Compact 4-lead TO-5 package
Low power consumption
Long life and low cost
Uses simple electrical circuit
PCB Mounted Gas Sensors
Operating conditions in which Sensors are used will vary with each customer's application. Gas and oxygen sensors are not authorised for use as critical components in life support applications wherein a failure or malfunction of the products may result in injury or threat to life. Non-calibrated PCB gas sensors will not operate properly if not calibrated prior to usage.
Semiconductor gas sensors for gas detection, air quality control, HVAC, appliance and automotive industries. Characteristics of the products in this range are small size, low cost, long life, low power consumption and no maintenance requirement
New items
TGS2611-E00, Figaro
TGS2610/2611/2612 Methane and LP Gas Sensors
Compact PCB mounting gas sensors from Figaro for use in the detection of methane and LP (liquefied petroleum) gas products. Type TGS2610 has high sensitivity to LP gas and its components such as propane and butane; type TGS2611 has high sensitivity to methane; TGS2612 has high sensitivity to methane, propane and butane with similar sensitivity (at same %LEL levels) for both methane and LP gases. Parts with suffix –C00 have a smaller package size with a faster response time; parts with –D00 & -E00 suffix have a larger package incorporating filter materials to reduce the effects of interference gases.
Compact 4-lead TO-5 package
Low power consumption
Long life and low cost
Uses simple electrical circuit
PCB Mounted Gas Sensors
Operating conditions in which Sensors are used will vary with each customer's application. Gas and oxygen sensors are not authorised for use as critical components in life support applications wherein a failure or malfunction of the products may result in injury or threat to life. Non-calibrated PCB gas sensors will not operate properly if not calibrated prior to usage.
Semiconductor gas sensors for gas detection, air quality control, HVAC, appliance and automotive industries. Characteristics of the products in this range are small size, low cost, long life, low power consumption and no maintenance requirement
New items
TGS832-F01, Figaro
TGS832 Chlorofluorocarbon (CFC) Gas Sensors
Gas sensors from Figaro for the detection of Chlorofluorocarbon (CFC) or Halocarbon gases. These devices utilise tin dioxide (SnO2) semiconductor technology to provide an output proportion to gas concentration. The sensors have high sensitivity to the refrigerant gases commonly used in air conditioning systems and refrigerators, such as R-134a, R-404a, R-407c and R-410.
Type TGS832-A00 has a gas diffusion hole in the sensor cap as well as in the sensor base and by using the sensor with a suction pump, response speed can be accelerated, making it suitable for portable gas leakage checkers.
Type TGS832-F01 uses filter material in its housing to eliminate the influence of interference gases such as alcohol, resulting in a highly selective response to CFCs. This feature makes the sensor ideal for stationary type leakage detectors which require durability and a high degree of resistance to interference gases.
PCB Mounted Gas Sensors
Operating conditions in which Sensors are used will vary with each customer's application. Gas and oxygen sensors are not authorised for use as critical components in life support applications wherein a failure or malfunction of the products may result in injury or threat to life. Non-calibrated PCB gas sensors will not operate properly if not calibrated prior to usage.
Semiconductor gas sensors for gas detection, air quality control, HVAC, appliance and automotive industries. Characteristics of the products in this range are small size, low cost, long life, low power consumption and no maintenance requirement
New items
NGM2611, Figaro
NGM2611-E13 Methane Gas Sensor Module
The NGM2611 from Figaro is a pre-calibrated sensor module for natural gas alarms which has been accurately calibrated in Figaros temperature and humidity controlled facility. The module uses the TGS2611-E00 gas sensor which incorporates a filter to reduce the influence of interference gases such as alcohol, resulting in highly selective response to methane. The module is designed to meet the performance requirements of EN50194 and UL1484.
Factory calibrated
Temperature compensation circuit
5V operating voltage
Compact module size
Meets RoHS regulations
PCB Mounted Gas Sensors
Operating conditions in which Sensors are used will vary with each customer's application. Gas and oxygen sensors are not authorised for use as critical components in life support applications wherein a failure or malfunction of the products may result in injury or threat to life. Non-calibrated PCB gas sensors will not operate properly if not calibrated prior to usage.
Semiconductor gas sensors for gas detection, air quality control, HVAC, appliance and automotive industries. Characteristics of the products in this range are small size, low cost, long life, low power consumption and no maintenance requirement
New items
TGS2612-D00, Figaro
TGS2610/2611/2612 Methane and LP Gas Sensors
Compact PCB mounting gas sensors from Figaro for use in the detection of methane and LP (liquefied petroleum) gas products. Type TGS2610 has high sensitivity to LP gas and its components such as propane and butane; type TGS2611 has high sensitivity to methane; TGS2612 has high sensitivity to methane, propane and butane with similar sensitivity (at same %LEL levels) for both methane and LP gases. Parts with suffix –C00 have a smaller package size with a faster response time; parts with –D00 & -E00 suffix have a larger package incorporating filter materials to reduce the effects of interference gases.
Compact 4-lead TO-5 package
Low power consumption
Long life and low cost
Uses simple electrical circuit
PCB Mounted Gas Sensors
Operating conditions in which Sensors are used will vary with each customer's application. Gas and oxygen sensors are not authorised for use as critical components in life support applications wherein a failure or malfunction of the products may result in injury or threat to life. Non-calibrated PCB gas sensors will not operate properly if not calibrated prior to usage.
Semiconductor gas sensors for gas detection, air quality control, HVAC, appliance and automotive industries. Characteristics of the products in this range are small size, low cost, long life, low power consumption and no maintenance requirement
Don’t hesitate to ask questions for better clarification.