Rates
400+
£ 11.43
Products Found: 314
Showing Results For: Backplane Connectors
Backplane Connectors
FILTERS
Filters
Showing
1 -
Popular Items
Popular items
244997 / 5646955-1 5L, ERNI
ERNI ERmet 2.0 mm Right Angled Male Power Modules
From ERNI Electronics, a series of backplane power connectors. These male angled universal power modules complete the ERmet 2.0 mm range. The universal power modules feature press-fit technology. Designed to supply power to daughter cards when used with 2 mm ERmet connectors conforming to IEC 61076-4-101. The superior quality power connectors have gold plated copper alloy contacts and a robust PBT-GF30 housing. The range includes 3, 5, 6 and 7-pin options accommodating a wide variety of current rating options. See part number
917-5241
for typical connector range
Popular items
Popular items
1410140-1, TE Connectivity
TE Connectivity VITA 46 VPX Compliant MULTIGIG RT Backplane Connectors
VITA 46 VPX Compliant MULTIGIG RT backplane connector system with a high-speed data rate capable of meeting or exceeding 10 Gbit/s. VPX provides higher speed data rates than VME and increases bandwidth with fewer pin counts. The MULTIGIG RT VITA 46 high-speed backplane system consists of backplane receptacle connectors and daughtercard plug connectors. These MULTIGIG RT VITA 46 high-speed backplane connectors have a modular design with optimized footprints for improved signal integrity. Staggered differential pairs minimize footprint noise. The modular design of these VITA 46 backplane connectors enables them to be used in various combinations offering flexibility in design. Flexible wafer layout options also enable customization. These MULTIGIG RT VITA 46 backplane connectors feature a robust pinless interface for increased reliability and durability, superior crosstalk performance and provide ESD protection in the unmated state. The connectors feature polarization to prevent mismating and have compliant PCB pins for manufacturing efficiency and superior electrical performance
Part number 1410187-3 is a Daughtercard Connector - Centre Module, Differential
Part number 1410190-3 is a Daughtercard Connector - Centre Module, Single Ended
Part number 1410189-3 is a Daughtercard Connector - Left End Half Module, Utility
Part number 1410140-1 is a Backplane Connector - Centre Module
Part number 1410142-1 is a Backplane Connector - Right End Module
Part number 1410186-1 is a Backplane Connector - Right End Half Module
Features and Benefits
• VITA 46 VPX Compliant
• High-Speed data rates of 10+ Gbit/s.
• Modular system for design flexibility
• Optimized footprints for improved signal integrity
• Pinless interface for increased reliability
• Superior cross talk performance
• Provide ESD pr...
Popular items
Popular items
1410187-3, TE Connectivity
TE Connectivity VITA 46 VPX Compliant MULTIGIG RT Backplane Connectors
VITA 46 VPX Compliant MULTIGIG RT backplane connector system with a high-speed data rate capable of meeting or exceeding 10 Gbit/s. VPX provides higher speed data rates than VME and increases bandwidth with fewer pin counts. The MULTIGIG RT VITA 46 high-speed backplane system consists of backplane receptacle connectors and daughtercard plug connectors. These MULTIGIG RT VITA 46 high-speed backplane connectors have a modular design with optimized footprints for improved signal integrity. Staggered differential pairs minimize footprint noise. The modular design of these VITA 46 backplane connectors enables them to be used in various combinations offering flexibility in design. Flexible wafer layout options also enable customization. These MULTIGIG RT VITA 46 backplane connectors feature a robust pinless interface for increased reliability and durability, superior crosstalk performance and provide ESD protection in the unmated state. The connectors feature polarization to prevent mismating and have compliant PCB pins for manufacturing efficiency and superior electrical performance
Part number 1410187-3 is a Daughtercard Connector - Centre Module, Differential
Part number 1410190-3 is a Daughtercard Connector - Centre Module, Single Ended
Part number 1410189-3 is a Daughtercard Connector - Left End Half Module, Utility
Part number 1410140-1 is a Backplane Connector - Centre Module
Part number 1410142-1 is a Backplane Connector - Right End Module
Part number 1410186-1 is a Backplane Connector - Right End Half Module
Features and Benefits
• VITA 46 VPX Compliant
• High-Speed data rates of 10+ Gbit/s.
• Modular system for design flexibility
• Optimized footprints for improved signal integrity
• Pinless interface for increased reliability
• Superior cross talk performance
• Provide ESD pr...
Popular items
RVPX-P08VM1, Amphenol
The Amphenol VITA 46 has 56 position which has 1.8mm pitch size and used solder termination method.
Modular system for design flexibility
Popular items
516-038-500-212, EDAC
Rack and Panel Plug Connector Housing, with Guide Pin
From EDAC, the cable mounting rack and panel connector housing incorporates an actuating screw to facilitate connection with a corresponding receptacle.
Crimp, solder and wire wrap contacts are available for this connector housing, and are sold separately.
EDAC 516 Range
This extensive range of 8.5A multipole connectors is suitable for use in a wide range of applications where safety and/or ultra-reliability is required. These include audio broadcast, railway signalling, oil and gas industry control systems together with general industrial and automotive control & test systems. These connectors are suitable wherever a multi-pin cable to panel or cable to cable connection is required. The plugs or receptacles of this high density system can form either the fixed or free half of the connector, providing designers with great flexibility.
Guaranteed secure connection
Hermaphroditic metal to metal contact design
Polarized mouldings and metal locators
Crimp, solder or wire wrap contacts
Contacts fit plug and socket
Current rating
8.5A max.
Contact resistance
6mΩ max.
Contact material
Phosphor bronze
Contact plating
Gold, 0.25-0.5μm over nickel
Insulator material
Polycarbonate
Dielectric withstanding voltage
1800V r.m.s. at sea level
Withdrawal force
0.56N to 4.45N per contact pair
Operating temperature
-65°C to +125°C
Popular items
Popular items
2198265-2, TE Connectivity
TE Connectivity STRADA WHISPER High Speed Backplane Connectors
STRADA WHISPER high-speed backplane connectors designed to transfer data at a blinding speed of 25 Gbit/s making them ideal for use in high performing, high-bandwidth systems. The STRADA WHISPER connectors can also be scaled up to 56 Gbit/s for future upgrades without the need for expensive backplane or midplane redesign. These STRADA WHISPER high-speed backplane header and receptacle connectors operate with low noise, low insertion loss and low skew offering design flexibility. The design of these high-speed backplane connectors uses EON (eye-of-needle) technology and the connector footprint is designed to reduce crosstalk. The signal pins of these STRADA WHISPER backplane connectors are protected by C-shaped 360-ground shields which provide high signal integrity.
Features and Benefits
High-speed data transfer of 25 Gbit/s
Scalable up to 56 Gbit/s
EON design technology
Footprint design for reduced crosstalk
Low noise and insertion loss
Low skew for design flexibility
C-shaped 360-ground shields for high signal integrity
Applicatons
These STRADA WHISPER high-speed backplane connectors are ideal for use in high performing, high-bandwidth systems. Applications include servers and storage, switches, routers, optical transport and wireless infrastructure.
TE Connectivity STRADA Whisper High Speed Backplane Connectors
Popular items
Popular items
516-038-500-451, EDAC
Rack and Panel Receptacle Connector Housing
From EDAC, the cable mounting rack and panel connector housing incorporates an actuating screw to facilitate connection with a corresponding connector.
Crimp, solder and wire wrap contacts are available for this connector housing, and are sold separately.
Dimensions (mm)
No. of ways
A
B
C
D
E
F
G Dia.
20 pin
24.38
28.6
32.26
6.60
10.41
16.26
2.64
38 pin
36.07
42.87
49.73
6.60
11.89
20.73
3.45
56 pin
49.28
57.91
64.77
6.60
11.89
20.73
3.45
90 pin
52.07
57.96
67.95
7.62
19.43
27.1
3.45
EDAC 516 Range
This extensive range of 8.5A multipole connectors is suitable for use in a wide range of applications where safety and/or ultra-reliability is required. These include audio broadcast, railway signalling, oil and gas industry control systems together with general industrial and automotive control & test systems. These connectors are suitable wherever a multi-pin cable to panel or cable to cable connection is required. The plugs or receptacles of this high density system can form either the fixed or free half of the connector, providing designers with great flexibility.
Guaranteed secure connection
Hermaphroditic metal to metal contact design
Polarized mouldings and metal locators
Crimp, solder or wire wrap contacts
Contacts fit plug and socket
Current rating
8.5A max.
Contact resistance
6mΩ max.
Contact material
Phosphor bronze
Contact plating
Gold, 0.25-0.5μm over nickel
Insulator material
Polycarbonate
Dielectric withstanding voltage
1800V r.m.s. at sea level
Withdrawal force
0.56N to 4.45N per contact pair
Operating temperature
-65°C to +125°C
Popular items
New Items
New items
244997 / 5646955-1 5L, ERNI
ERNI ERmet 2.0 mm Right Angled Male Power Modules
From ERNI Electronics, a series of backplane power connectors. These male angled universal power modules complete the ERmet 2.0 mm range. The universal power modules feature press-fit technology. Designed to supply power to daughter cards when used with 2 mm ERmet connectors conforming to IEC 61076-4-101. The superior quality power connectors have gold plated copper alloy contacts and a robust PBT-GF30 housing. The range includes 3, 5, 6 and 7-pin options accommodating a wide variety of current rating options. See part number
917-5241
for typical connector range
New items
516-038-500-451, EDAC
Rack and Panel Receptacle Connector Housing
From EDAC, the cable mounting rack and panel connector housing incorporates an actuating screw to facilitate connection with a corresponding connector.
Crimp, solder and wire wrap contacts are available for this connector housing, and are sold separately.
Dimensions (mm)
No. of ways
A
B
C
D
E
F
G Dia.
20 pin
24.38
28.6
32.26
6.60
10.41
16.26
2.64
38 pin
36.07
42.87
49.73
6.60
11.89
20.73
3.45
56 pin
49.28
57.91
64.77
6.60
11.89
20.73
3.45
90 pin
52.07
57.96
67.95
7.62
19.43
27.1
3.45
EDAC 516 Range
This extensive range of 8.5A multipole connectors is suitable for use in a wide range of applications where safety and/or ultra-reliability is required. These include audio broadcast, railway signalling, oil and gas industry control systems together with general industrial and automotive control & test systems. These connectors are suitable wherever a multi-pin cable to panel or cable to cable connection is required. The plugs or receptacles of this high density system can form either the fixed or free half of the connector, providing designers with great flexibility.
Guaranteed secure connection
Hermaphroditic metal to metal contact design
Polarized mouldings and metal locators
Crimp, solder or wire wrap contacts
Contacts fit plug and socket
Current rating
8.5A max.
Contact resistance
6mΩ max.
Contact material
Phosphor bronze
Contact plating
Gold, 0.25-0.5μm over nickel
Insulator material
Polycarbonate
Dielectric withstanding voltage
1800V r.m.s. at sea level
Withdrawal force
0.56N to 4.45N per contact pair
Operating temperature
-65°C to +125°C
New items
New items
5223513-2, TE Connectivity
Z-PACKâ„¢ 2mm FB (Futurebus+) Connectors
High density, high speed signal and power connectors
Modular design, end to end stackable
Complies with Futurebus+ and IEC 1076-4-0X-(48B)
The Z-PACK 2 mm HM Interconnection System is designed as a two part system for the connection of free boards (Daughterboards or PCBs) to fixed boards (Motherboards, Backplane or Backpanel) and feed the connection through the fixed board.
New items
RVPX-P08VM1, Amphenol
The Amphenol VITA 46 has 56 position which has 1.8mm pitch size and used solder termination method.
Modular system for design flexibility
New items
516-038-500-212, EDAC
Rack and Panel Plug Connector Housing, with Guide Pin
From EDAC, the cable mounting rack and panel connector housing incorporates an actuating screw to facilitate connection with a corresponding receptacle.
Crimp, solder and wire wrap contacts are available for this connector housing, and are sold separately.
EDAC 516 Range
This extensive range of 8.5A multipole connectors is suitable for use in a wide range of applications where safety and/or ultra-reliability is required. These include audio broadcast, railway signalling, oil and gas industry control systems together with general industrial and automotive control & test systems. These connectors are suitable wherever a multi-pin cable to panel or cable to cable connection is required. The plugs or receptacles of this high density system can form either the fixed or free half of the connector, providing designers with great flexibility.
Guaranteed secure connection
Hermaphroditic metal to metal contact design
Polarized mouldings and metal locators
Crimp, solder or wire wrap contacts
Contacts fit plug and socket
Current rating
8.5A max.
Contact resistance
6mΩ max.
Contact material
Phosphor bronze
Contact plating
Gold, 0.25-0.5μm over nickel
Insulator material
Polycarbonate
Dielectric withstanding voltage
1800V r.m.s. at sea level
Withdrawal force
0.56N to 4.45N per contact pair
Operating temperature
-65°C to +125°C
New items
New items
2198265-2, TE Connectivity
TE Connectivity STRADA WHISPER High Speed Backplane Connectors
STRADA WHISPER high-speed backplane connectors designed to transfer data at a blinding speed of 25 Gbit/s making them ideal for use in high performing, high-bandwidth systems. The STRADA WHISPER connectors can also be scaled up to 56 Gbit/s for future upgrades without the need for expensive backplane or midplane redesign. These STRADA WHISPER high-speed backplane header and receptacle connectors operate with low noise, low insertion loss and low skew offering design flexibility. The design of these high-speed backplane connectors uses EON (eye-of-needle) technology and the connector footprint is designed to reduce crosstalk. The signal pins of these STRADA WHISPER backplane connectors are protected by C-shaped 360-ground shields which provide high signal integrity.
Features and Benefits
High-speed data transfer of 25 Gbit/s
Scalable up to 56 Gbit/s
EON design technology
Footprint design for reduced crosstalk
Low noise and insertion loss
Low skew for design flexibility
C-shaped 360-ground shields for high signal integrity
Applicatons
These STRADA WHISPER high-speed backplane connectors are ideal for use in high performing, high-bandwidth systems. Applications include servers and storage, switches, routers, optical transport and wireless infrastructure.
TE Connectivity STRADA Whisper High Speed Backplane Connectors
New items
New items
516-056-000-321, EDAC
EDAC 516 Rack and Panel Connector with Backshell
From EDAC, this 516 series rack and panel connector comes with a protective back shell, a guide pin and connecting jack screws. The connector housing is designed to use female and male contacts, which are available separately.
Available in this Range
• Stock No.
910-8383
is a 56 way Rack and Panel Connector Housing with a Top Entry Back Shell, Guide Pin and Jack Screws
• Stock No.
910-8386
is a 56 way Rack and Panel Connector Housing with a Side Entry Back Shell, Guide Pin and Jack Screws
EDAC 516 Range
This extensive range of 8.5A multipole connectors is suitable for use in a wide range of applications where safety and/or ultra-reliability is required. These include audio broadcast, railway signalling, oil and gas industry control systems together with general industrial and automotive control & test systems. These connectors are suitable wherever a multi-pin cable to panel or cable to cable connection is required. The plugs or receptacles of this high density system can form either the fixed or free half of the connector, providing designers with great flexibility.
Guaranteed secure connection
Hermaphroditic metal to metal contact design
Polarized mouldings and metal locators
Crimp, solder or wire wrap contacts
Contacts fit plug and socket
Current rating
8.5A max.
Contact resistance
6mΩ max.
Contact material
Phosphor bronze
Contact plating
Gold, 0.25-0.5μm over nickel
Insulator material
Polycarbonate
Dielectric withstanding voltage
1800V r.m.s. at sea level
Withdrawal force
0.56N to 4.45N per contact pair
Operating temperature
-65°C to +125°C
New items
5536504-1, TE Connectivity
Z-PACKâ„¢ 2mm FB (Futurebus+) Connectors
High density, high speed signal and power connectors
Modular design, end to end stackable
Complies with Futurebus+ and IEC 1076-4-0X-(48B)
The Z-PACK 2 mm HM Interconnection System is designed as a two part system for the connection of free boards (Daughterboards or PCBs) to fixed boards (Motherboards, Backplane or Backpanel) and feed the connection through the fixed board.
New items
FAQs
We offer free shipping for orders over £200 if delivery is in the UK. All other orders in the UK, shipping from £7.99 depending on the weight and measurement. Mainland Europe shipping charges start from £25. For all other countries shipping charges start from £50 for products like Backplane Connectors and all others.
You can email us directly at sales@enrgtech.co.uk or via our website for any queries regarding Backplane Connectors or any other product.
This depends on the Backplane Connectors individual product and information that can be found on our website.
Yes, we offer special discounts on orders above £200 for Backplane Connectors and all other products.
UK orders normally take between 2/3 working days. International orders normally take between 3/5 working days for all products including Backplane Connectors.
Yes. We keep updating our stock frequently and if a product like Backplane Connectors is not in stock then we will let you know.