EDAC Profile
EDAC, a world-renowned manufacturing brand, established in 1966 and shortly became a world leader in supplying connectors for Card Edge and Panel & Rack applications. Since 1966, the company has extended the range of its products offering to incorporate the widest varieties of interconnect solutions around the globe. Quality products like custom connectors, card edge connectors, rectangular connectors, USB connectors, cable assemblies, inline connectors, header connectors, waterproof connectors, and spring-loaded connectors are manufactured and deployed by the company, which fulfil the requirements of the customers and are used by millions of people worldwide. Global distribution channels and Original Equipment Manufacturers (OEMs) in the computing and storage, medical, aerospace, industrial, communications networks, consumer, and clean technology sectors can rely on EDAC, a recognized industry leader, for design, manufacturing, and logistics solutions that are of the highest quality and offer the best customer service.
Featured Products
Rack and Panel Receptacle Connector Housing, with Guide Pin From EDAC, the cable mounting rack and panel connector housing incorporates an actua...
Rack and Panel Receptacle Connector Housing From EDAC, the cable mounting rack and panel connector housing incorporates an actuating screw to fa...
Rack and Panel Receptacle Connector Housing, with Guide Pin From EDAC, the cable mounting rack and panel co...
Rack and Panel Plug Connector Housing, with Guide Pin From EDAC, the cable mounting rack and panel connector housing incorporates an actuating s...
EDAC IP67 560 Series Receptacles From EDAC, a series of superior quality fully waterproof wire to wire conn...
EDAC 516 Rack and Panel Connector with Backshell From EDAC, this 516 series rack and panel connector comes...
EDAC IP67 560 Series Board Mount Plugs From EDAC, a series of superior quality fully waterproof wire to board conne...
EDAC IP67 572 Series Wire to Wire Plugs From EDAC, a series of superior quality fully waterproof wire to wi...
The EDAC 140 series wire to board in-line 2.0 mm pitch connector with 4 P.C. board through hole contacts which are designed for high-density conn...
The EDAC 140 series wire to board in-line 2.0 mm pitch connector with 4 surface mount contacts which are designed for high-density connection of...
The EDAC 140 series wire to board in-line 2.0 mm pitch connector with 6 surface mount contacts which are designed for high-density connection of...
EDAC IP67 572 Series Wire Seals From EDAC, a series of wire seals for the 572 range of waterproof connectors. The silicone rubber wire seals are...
Popular Categories For EDAC
Categories For EDAC
Popular Items
Popular items
516-056-000-401, EDAC
Rack and Panel Receptacle Connector Housing, with Guide Pin
From EDAC, the cable mounting rack and panel connector housing incorporates an actuating screw to facilitate connection with a corresponding connector.
Crimp, solder and wire wrap contacts are available for this connector housing, and are sold separately.
EDAC 516 Range
This extensive range of 8.5A multipole connectors is suitable for use in a wide range of applications where safety and/or ultra-reliability is required. These include audio broadcast, railway signalling, oil and gas industry control systems together with general industrial and automotive control & test systems. These connectors are suitable wherever a multi-pin cable to panel or cable to cable connection is required. The plugs or receptacles of this high density system can form either the fixed or free half of the connector, providing designers with great flexibility.
Guaranteed secure connection
Hermaphroditic metal to metal contact design
Polarized mouldings and metal locators
Crimp, solder or wire wrap contacts
Contacts fit plug and socket
Current rating
8.5A max.
Contact resistance
6mΩ max.
Contact material
Phosphor bronze
Contact plating
Gold, 0.25-0.5μm over nickel
Insulator material
Polycarbonate
Dielectric withstanding voltage
1800V r.m.s. at sea level
Withdrawal force
0.56N to 4.45N per contact pair
Operating temperature
-65°C to +125°C
Popular items
516-038-500-451, EDAC
Rack and Panel Receptacle Connector Housing
From EDAC, the cable mounting rack and panel connector housing incorporates an actuating screw to facilitate connection with a corresponding connector.
Crimp, solder and wire wrap contacts are available for this connector housing, and are sold separately.
Dimensions (mm)
No. of ways
A
B
C
D
E
F
G Dia.
20 pin
24.38
28.6
32.26
6.60
10.41
16.26
2.64
38 pin
36.07
42.87
49.73
6.60
11.89
20.73
3.45
56 pin
49.28
57.91
64.77
6.60
11.89
20.73
3.45
90 pin
52.07
57.96
67.95
7.62
19.43
27.1
3.45
EDAC 516 Range
This extensive range of 8.5A multipole connectors is suitable for use in a wide range of applications where safety and/or ultra-reliability is required. These include audio broadcast, railway signalling, oil and gas industry control systems together with general industrial and automotive control & test systems. These connectors are suitable wherever a multi-pin cable to panel or cable to cable connection is required. The plugs or receptacles of this high density system can form either the fixed or free half of the connector, providing designers with great flexibility.
Guaranteed secure connection
Hermaphroditic metal to metal contact design
Polarized mouldings and metal locators
Crimp, solder or wire wrap contacts
Contacts fit plug and socket
Current rating
8.5A max.
Contact resistance
6mΩ max.
Contact material
Phosphor bronze
Contact plating
Gold, 0.25-0.5μm over nickel
Insulator material
Polycarbonate
Dielectric withstanding voltage
1800V r.m.s. at sea level
Withdrawal force
0.56N to 4.45N per contact pair
Operating temperature
-65°C to +125°C
Popular items
516-020-000-201, EDAC
Rack and Panel Receptacle Connector Housing, with Guide Pin
From EDAC, the cable mounting rack and panel connector housing incorporates an actuating screw to facilitate connection with a corresponding connector.
Crimp, solder and wire wrap contacts are available for this connector housing, and are sold separately.
EDAC 516 Range
This extensive range of 8.5A multipole connectors is suitable for use in a wide range of applications where safety and/or ultra-reliability is required. These include audio broadcast, railway signalling, oil and gas industry control systems together with general industrial and automotive control & test systems. These connectors are suitable wherever a multi-pin cable to panel or cable to cable connection is required. The plugs or receptacles of this high density system can form either the fixed or free half of the connector, providing designers with great flexibility.
Guaranteed secure connection
Hermaphroditic metal to metal contact design
Polarized mouldings and metal locators
Crimp, solder or wire wrap contacts
Contacts fit plug and socket
Current rating
8.5A max.
Contact resistance
6mΩ max.
Contact material
Phosphor bronze
Contact plating
Gold, 0.25-0.5μm over nickel
Insulator material
Polycarbonate
Dielectric withstanding voltage
1800V r.m.s. at sea level
Withdrawal force
0.56N to 4.45N per contact pair
Operating temperature
-65°C to +125°C
Popular items
516-038-500-212, EDAC
Rack and Panel Plug Connector Housing, with Guide Pin
From EDAC, the cable mounting rack and panel connector housing incorporates an actuating screw to facilitate connection with a corresponding receptacle.
Crimp, solder and wire wrap contacts are available for this connector housing, and are sold separately.
EDAC 516 Range
This extensive range of 8.5A multipole connectors is suitable for use in a wide range of applications where safety and/or ultra-reliability is required. These include audio broadcast, railway signalling, oil and gas industry control systems together with general industrial and automotive control & test systems. These connectors are suitable wherever a multi-pin cable to panel or cable to cable connection is required. The plugs or receptacles of this high density system can form either the fixed or free half of the connector, providing designers with great flexibility.
Guaranteed secure connection
Hermaphroditic metal to metal contact design
Polarized mouldings and metal locators
Crimp, solder or wire wrap contacts
Contacts fit plug and socket
Current rating
8.5A max.
Contact resistance
6mΩ max.
Contact material
Phosphor bronze
Contact plating
Gold, 0.25-0.5μm over nickel
Insulator material
Polycarbonate
Dielectric withstanding voltage
1800V r.m.s. at sea level
Withdrawal force
0.56N to 4.45N per contact pair
Operating temperature
-65°C to +125°C
Popular items
560-003-000-410, EDAC
EDAC IP67 560 Series Receptacles
From EDAC, a series of superior quality fully waterproof wire to wire connectors. These IP67 rated receptacles have pre-assembled housings featuring an integrated seal providing complete waterproof protection guaranteeing no water ingress. The 560 series of connectors have a 2.5 mm pitch and can accommodate a wire size range of 1.0 mm to 1.7 mm. This range of wire to wire connectors are available in 2, 3 and 5 pole arrangements offering a wide range of connection solutions. Operating temperature across the whole series of -40° to + 105°. A hand crimp tool for the 560 series is available, see part number
111-9356
Features and Benefits
Fully waterproof with double latch
Internal polarisation preventing miss mating
Pre-assembled housings and seals
Easy crimp and poke
Wire to wire and wire to board options
Applications
Lighting
Industrial Pumps
Test equipment
Emergency vehicles
Construction equipment
Welding equipment
Automotive
Sound and broadcast systems
IP67 Edac Range
Popular items
516-056-000-321, EDAC
EDAC 516 Rack and Panel Connector with Backshell
From EDAC, this 516 series rack and panel connector comes with a protective back shell, a guide pin and connecting jack screws. The connector housing is designed to use female and male contacts, which are available separately.
Available in this Range
Stock No.
910-8383
is a 56 way Rack and Panel Connector Housing with a Top Entry Back Shell, Guide Pin and Jack Screws
Stock No.
910-8386
is a 56 way Rack and Panel Connector Housing with a Side Entry Back Shell, Guide Pin and Jack Screws
EDAC 516 Range
This extensive range of 8.5A multipole connectors is suitable for use in a wide range of applications where safety and/or ultra-reliability is required. These include audio broadcast, railway signalling, oil and gas industry control systems together with general industrial and automotive control & test systems. These connectors are suitable wherever a multi-pin cable to panel or cable to cable connection is required. The plugs or receptacles of this high density system can form either the fixed or free half of the connector, providing designers with great flexibility.
Guaranteed secure connection
Hermaphroditic metal to metal contact design
Polarized mouldings and metal locators
Crimp, solder or wire wrap contacts
Contacts fit plug and socket
Current rating
8.5A max.
Contact resistance
6mΩ max.
Contact material
Phosphor bronze
Contact plating
Gold, 0.25-0.5μm over nickel
Insulator material
Polycarbonate
Dielectric withstanding voltage
1800V r.m.s. at sea level
Withdrawal force
0.56N to 4.45N per contact pair
Operating temperature
-65°C to +125°C
Popular items
560-005-420-301, EDAC
EDAC IP67 560 Series Board Mount Plugs
From EDAC, a series of superior quality fully waterproof wire to board connectors. These IP67 rated plugs have pre-assembled housings featuring an integrated seal providing complete waterproof protection guaranteeing no water ingress. The 560 series of connectors have a 2.5 mm pitch and can accommodate a wire size range of 1.0 mm to 1.7 mm. This range of wire to board connectors are available in 2, 3 and 5 pole arrangements offering a wide range of connection solutions. Operating temperature across the whole series of -40° to + 105°. A hand crimp tool for the 560 series is available, see part number
111-9356
Features and Benefits
Fully waterproof with double latch
Internal polarisation preventing miss mating
Pre-assembled housings and seals
Easy crimp and poke
Wire to wire and wire to board options
Applications
Lighting
Industrial Pumps
Test equipment
Emergency vehicles
Construction equipment
Welding equipment
Automotive
Sound and broadcast systems
IP67 Edac Range
Popular items
572-002-000-300, EDAC
EDAC IP67 572 Series Wire to Wire Plugs
From EDAC, a series of superior quality fully waterproof wire to wire connectors. These IP67 rated plugs have pre-assembled housings featuring an integrated seal providing complete waterproof protection guaranteeing no water ingress. The 572 series of connectors have a 5.8mm pitch and can accommodate a wide range of wire sizes depending on the crimp contacts selected. This range of wire to wire connectors are available in 1, 2 and 3 pole arrangements offering a wide range of connection solutions. Operating temperature across the whole series of -40° to + 105°. A hand crimp tool for the 572 series is available, see part number
111-9356
Features and Benefits
Fully waterproof with double latch
Internal polarisation preventing miss mating
Pre-assembled housings and seals
Easy crimp and poke
Wire to wire and wire to board options
Applications
Lighting
Industrial Pumps
Test equipment
Emergency vehicles
Construction equipment
Welding equipment
Automotive
Sound and broadcast systems
IP67 Edac Range
Popular items
140-504-415-000, EDAC
The EDAC 140 series wire to board in-line 2.0 mm pitch connector with 4 P.C. board through hole contacts which are designed for high-density connection of internal wires to PCB and has side entry configuration. The first and last contact are kinked. It also features contact termination options which includes P.C. tail, surface mount.
Low profile insulator body
Board retention contacts available
Operating temperature -40°C to +105°C
Insulation resistance 1000 megaohms minimum
Insulator material PA66, UL94V-0
Popular items
140-504-417-011, EDAC
The EDAC 140 series wire to board in-line 2.0 mm pitch connector with 4 surface mount contacts which are designed for high-density connection of internal wires to PCB and has top entry configuration.
Low profile insulator body
Board retention contacts available
Operating temperature -40°C to +105°C
Insulation resistance 1000 megaohms minimum
Insulator material PA66, UL94V-0
Popular items
140-506-417-011, EDAC
The EDAC 140 series wire to board in-line 2.0 mm pitch connector with 6 surface mount contacts which are designed for high-density connection of internal wires to PCB and has top entry configuration.
Low profile insulator body
Board retention contacts available
Operating temperature -40°C to +105°C
Insulation resistance 1000 megaohms minimum
Insulator material PA66, UL94V-0
Popular items
570-260-002, EDAC
EDAC IP67 572 Series Wire Seals
From EDAC, a series of wire seals for the 572 range of waterproof connectors. The silicone rubber wire seals are crimped with the contacts providing extra protection at the rear of the housing. The wire seals in the 572 range are available in various colours and wire sizes.
Part number
111-9352
Black – 22 AWG
Part number
111-9353
Light blue – 20-22 AWG
Part number
111-9354
Blue – 22-20 AWG
Part number
111-9355
Brown – 20-14 AWG
IP67 Edac Range
New Items
New items
516-056-000-401, EDAC
Rack and Panel Receptacle Connector Housing, with Guide Pin
From EDAC, the cable mounting rack and panel connector housing incorporates an actuating screw to facilitate connection with a corresponding connector.
Crimp, solder and wire wrap contacts are available for this connector housing, and are sold separately.
EDAC 516 Range
This extensive range of 8.5A multipole connectors is suitable for use in a wide range of applications where safety and/or ultra-reliability is required. These include audio broadcast, railway signalling, oil and gas industry control systems together with general industrial and automotive control & test systems. These connectors are suitable wherever a multi-pin cable to panel or cable to cable connection is required. The plugs or receptacles of this high density system can form either the fixed or free half of the connector, providing designers with great flexibility.
Guaranteed secure connection
Hermaphroditic metal to metal contact design
Polarized mouldings and metal locators
Crimp, solder or wire wrap contacts
Contacts fit plug and socket
Current rating
8.5A max.
Contact resistance
6mΩ max.
Contact material
Phosphor bronze
Contact plating
Gold, 0.25-0.5μm over nickel
Insulator material
Polycarbonate
Dielectric withstanding voltage
1800V r.m.s. at sea level
Withdrawal force
0.56N to 4.45N per contact pair
Operating temperature
-65°C to +125°C
New items
516-038-500-212, EDAC
Rack and Panel Plug Connector Housing, with Guide Pin
From EDAC, the cable mounting rack and panel connector housing incorporates an actuating screw to facilitate connection with a corresponding receptacle.
Crimp, solder and wire wrap contacts are available for this connector housing, and are sold separately.
EDAC 516 Range
This extensive range of 8.5A multipole connectors is suitable for use in a wide range of applications where safety and/or ultra-reliability is required. These include audio broadcast, railway signalling, oil and gas industry control systems together with general industrial and automotive control & test systems. These connectors are suitable wherever a multi-pin cable to panel or cable to cable connection is required. The plugs or receptacles of this high density system can form either the fixed or free half of the connector, providing designers with great flexibility.
Guaranteed secure connection
Hermaphroditic metal to metal contact design
Polarized mouldings and metal locators
Crimp, solder or wire wrap contacts
Contacts fit plug and socket
Current rating
8.5A max.
Contact resistance
6mΩ max.
Contact material
Phosphor bronze
Contact plating
Gold, 0.25-0.5μm over nickel
Insulator material
Polycarbonate
Dielectric withstanding voltage
1800V r.m.s. at sea level
Withdrawal force
0.56N to 4.45N per contact pair
Operating temperature
-65°C to +125°C
New items
516-020-000-201, EDAC
Rack and Panel Receptacle Connector Housing, with Guide Pin
From EDAC, the cable mounting rack and panel connector housing incorporates an actuating screw to facilitate connection with a corresponding connector.
Crimp, solder and wire wrap contacts are available for this connector housing, and are sold separately.
EDAC 516 Range
This extensive range of 8.5A multipole connectors is suitable for use in a wide range of applications where safety and/or ultra-reliability is required. These include audio broadcast, railway signalling, oil and gas industry control systems together with general industrial and automotive control & test systems. These connectors are suitable wherever a multi-pin cable to panel or cable to cable connection is required. The plugs or receptacles of this high density system can form either the fixed or free half of the connector, providing designers with great flexibility.
Guaranteed secure connection
Hermaphroditic metal to metal contact design
Polarized mouldings and metal locators
Crimp, solder or wire wrap contacts
Contacts fit plug and socket
Current rating
8.5A max.
Contact resistance
6mΩ max.
Contact material
Phosphor bronze
Contact plating
Gold, 0.25-0.5μm over nickel
Insulator material
Polycarbonate
Dielectric withstanding voltage
1800V r.m.s. at sea level
Withdrawal force
0.56N to 4.45N per contact pair
Operating temperature
-65°C to +125°C
New items
560-005-420-301, EDAC
EDAC IP67 560 Series Board Mount Plugs
From EDAC, a series of superior quality fully waterproof wire to board connectors. These IP67 rated plugs have pre-assembled housings featuring an integrated seal providing complete waterproof protection guaranteeing no water ingress. The 560 series of connectors have a 2.5 mm pitch and can accommodate a wire size range of 1.0 mm to 1.7 mm. This range of wire to board connectors are available in 2, 3 and 5 pole arrangements offering a wide range of connection solutions. Operating temperature across the whole series of -40° to + 105°. A hand crimp tool for the 560 series is available, see part number
111-9356
Features and Benefits
Fully waterproof with double latch
Internal polarisation preventing miss mating
Pre-assembled housings and seals
Easy crimp and poke
Wire to wire and wire to board options
Applications
Lighting
Industrial Pumps
Test equipment
Emergency vehicles
Construction equipment
Welding equipment
Automotive
Sound and broadcast systems
IP67 Edac Range
New items
560-003-000-410, EDAC
EDAC IP67 560 Series Receptacles
From EDAC, a series of superior quality fully waterproof wire to wire connectors. These IP67 rated receptacles have pre-assembled housings featuring an integrated seal providing complete waterproof protection guaranteeing no water ingress. The 560 series of connectors have a 2.5 mm pitch and can accommodate a wire size range of 1.0 mm to 1.7 mm. This range of wire to wire connectors are available in 2, 3 and 5 pole arrangements offering a wide range of connection solutions. Operating temperature across the whole series of -40° to + 105°. A hand crimp tool for the 560 series is available, see part number
111-9356
Features and Benefits
Fully waterproof with double latch
Internal polarisation preventing miss mating
Pre-assembled housings and seals
Easy crimp and poke
Wire to wire and wire to board options
Applications
Lighting
Industrial Pumps
Test equipment
Emergency vehicles
Construction equipment
Welding equipment
Automotive
Sound and broadcast systems
IP67 Edac Range
New items
516-056-000-321, EDAC
EDAC 516 Rack and Panel Connector with Backshell
From EDAC, this 516 series rack and panel connector comes with a protective back shell, a guide pin and connecting jack screws. The connector housing is designed to use female and male contacts, which are available separately.
Available in this Range
Stock No.
910-8383
is a 56 way Rack and Panel Connector Housing with a Top Entry Back Shell, Guide Pin and Jack Screws
Stock No.
910-8386
is a 56 way Rack and Panel Connector Housing with a Side Entry Back Shell, Guide Pin and Jack Screws
EDAC 516 Range
This extensive range of 8.5A multipole connectors is suitable for use in a wide range of applications where safety and/or ultra-reliability is required. These include audio broadcast, railway signalling, oil and gas industry control systems together with general industrial and automotive control & test systems. These connectors are suitable wherever a multi-pin cable to panel or cable to cable connection is required. The plugs or receptacles of this high density system can form either the fixed or free half of the connector, providing designers with great flexibility.
Guaranteed secure connection
Hermaphroditic metal to metal contact design
Polarized mouldings and metal locators
Crimp, solder or wire wrap contacts
Contacts fit plug and socket
Current rating
8.5A max.
Contact resistance
6mΩ max.
Contact material
Phosphor bronze
Contact plating
Gold, 0.25-0.5μm over nickel
Insulator material
Polycarbonate
Dielectric withstanding voltage
1800V r.m.s. at sea level
Withdrawal force
0.56N to 4.45N per contact pair
Operating temperature
-65°C to +125°C
New items
516-038-500-451, EDAC
Rack and Panel Receptacle Connector Housing
From EDAC, the cable mounting rack and panel connector housing incorporates an actuating screw to facilitate connection with a corresponding connector.
Crimp, solder and wire wrap contacts are available for this connector housing, and are sold separately.
Dimensions (mm)
No. of ways
A
B
C
D
E
F
G Dia.
20 pin
24.38
28.6
32.26
6.60
10.41
16.26
2.64
38 pin
36.07
42.87
49.73
6.60
11.89
20.73
3.45
56 pin
49.28
57.91
64.77
6.60
11.89
20.73
3.45
90 pin
52.07
57.96
67.95
7.62
19.43
27.1
3.45
EDAC 516 Range
This extensive range of 8.5A multipole connectors is suitable for use in a wide range of applications where safety and/or ultra-reliability is required. These include audio broadcast, railway signalling, oil and gas industry control systems together with general industrial and automotive control & test systems. These connectors are suitable wherever a multi-pin cable to panel or cable to cable connection is required. The plugs or receptacles of this high density system can form either the fixed or free half of the connector, providing designers with great flexibility.
Guaranteed secure connection
Hermaphroditic metal to metal contact design
Polarized mouldings and metal locators
Crimp, solder or wire wrap contacts
Contacts fit plug and socket
Current rating
8.5A max.
Contact resistance
6mΩ max.
Contact material
Phosphor bronze
Contact plating
Gold, 0.25-0.5μm over nickel
Insulator material
Polycarbonate
Dielectric withstanding voltage
1800V r.m.s. at sea level
Withdrawal force
0.56N to 4.45N per contact pair
Operating temperature
-65°C to +125°C
New items
516-020-000-402, EDAC
Rack and Panel Receptacle Connector Housing
From EDAC, the cable mounting rack and panel connector housing incorporates an actuating screw to facilitate connection with a corresponding connector.
Crimp, solder and wire wrap contacts are available for this connector housing, and are sold separately.
Dimensions (mm)
No. of ways
A
B
C
D
E
F
G Dia.
20 pin
24.38
28.6
32.26
6.60
10.41
16.26
2.64
38 pin
36.07
42.87
49.73
6.60
11.89
20.73
3.45
56 pin
49.28
57.91
64.77
6.60
11.89
20.73
3.45
90 pin
52.07
57.96
67.95
7.62
19.43
27.1
3.45
EDAC 516 Range
This extensive range of 8.5A multipole connectors is suitable for use in a wide range of applications where safety and/or ultra-reliability is required. These include audio broadcast, railway signalling, oil and gas industry control systems together with general industrial and automotive control & test systems. These connectors are suitable wherever a multi-pin cable to panel or cable to cable connection is required. The plugs or receptacles of this high density system can form either the fixed or free half of the connector, providing designers with great flexibility.
Guaranteed secure connection
Hermaphroditic metal to metal contact design
Polarized mouldings and metal locators
Crimp, solder or wire wrap contacts
Contacts fit plug and socket
Current rating
8.5A max.
Contact resistance
6mΩ max.
Contact material
Phosphor bronze
Contact plating
Gold, 0.25-0.5μm over nickel
Insulator material
Polycarbonate
Dielectric withstanding voltage
1800V r.m.s. at sea level
Withdrawal force
0.56N to 4.45N per contact pair
Operating temperature
-65°C to +125°C
New items
572-002-000-300, EDAC
EDAC IP67 572 Series Wire to Wire Plugs
From EDAC, a series of superior quality fully waterproof wire to wire connectors. These IP67 rated plugs have pre-assembled housings featuring an integrated seal providing complete waterproof protection guaranteeing no water ingress. The 572 series of connectors have a 5.8mm pitch and can accommodate a wide range of wire sizes depending on the crimp contacts selected. This range of wire to wire connectors are available in 1, 2 and 3 pole arrangements offering a wide range of connection solutions. Operating temperature across the whole series of -40° to + 105°. A hand crimp tool for the 572 series is available, see part number
111-9356
Features and Benefits
Fully waterproof with double latch
Internal polarisation preventing miss mating
Pre-assembled housings and seals
Easy crimp and poke
Wire to wire and wire to board options
Applications
Lighting
Industrial Pumps
Test equipment
Emergency vehicles
Construction equipment
Welding equipment
Automotive
Sound and broadcast systems
IP67 Edac Range
New items
570-260-001, EDAC
EDAC IP67 572 Series Wire Seals
From EDAC, a series of wire seals for the 572 range of waterproof connectors. The silicone rubber wire seals are crimped with the contacts providing extra protection at the rear of the housing. The wire seals in the 572 range are available in various colours and wire sizes.
Part number
111-9352
Black – 22 AWG
Part number
111-9353
Light blue – 20-22 AWG
Part number
111-9354
Blue – 22-20 AWG
Part number
111-9355
Brown – 20-14 AWG
IP67 Edac Range
New items
570-260-002, EDAC
EDAC IP67 572 Series Wire Seals
From EDAC, a series of wire seals for the 572 range of waterproof connectors. The silicone rubber wire seals are crimped with the contacts providing extra protection at the rear of the housing. The wire seals in the 572 range are available in various colours and wire sizes.
Part number
111-9352
Black – 22 AWG
Part number
111-9353
Light blue – 20-22 AWG
Part number
111-9354
Blue – 22-20 AWG
Part number
111-9355
Brown – 20-14 AWG
IP67 Edac Range
New items
140-504-415-000, EDAC
The EDAC 140 series wire to board in-line 2.0 mm pitch connector with 4 P.C. board through hole contacts which are designed for high-density connection of internal wires to PCB and has side entry configuration. The first and last contact are kinked. It also features contact termination options which includes P.C. tail, surface mount.
Low profile insulator body
Board retention contacts available
Operating temperature -40°C to +105°C
Insulation resistance 1000 megaohms minimum
Insulator material PA66, UL94V-0
Don’t hesitate to ask questions for better clarification.