Featured Products
The CVL-2400/5500 is a Dual Band WiFi antenna with an innovative overmolded design. It provides WiFi capability on the 2.4-2.5 Ghz and 4.9-6.0 GH...
ECO Series 5.0∼6.0GHz Omni Antenna The Omni antenna provides uniform horizontal pattern Weatherproof and durable de...
2.4GHz WiFi Covert Antenna Low profile and compact, perfect for covert use or unobstructed view use Weather resista...
The OD3-700/2700 is a wide band omni-directional antenna that operates on the 694-960 MHz and 1700-2700 MHz frequencies. Using the popular OD ser...
Luxul’s X-WAV™ Antenna family implements Clear-WAV™ Circular Polarization technology for increased signal penetration, less interference and exte...
2.4GHz Corner Reflector Antenna Balun fed design provides high effieciency radiation without skewing of the...
Magnetic Mount GPS Antenna Magnet version mounts easily to roof or trunk of vehicle High gain 26 dB active amplifier with low noise characterist...
Cable Assemblies SMA Series Mobile Mark RF cable assemblies provide extension capability to standard antennas confi...
ECO Series 2.4GHz Omni Antenna The Omni antenna provides uniform horizontal pattern Weatherproof and durabl...
RFID 8dBi Panel Antenna PN8 Series 8dBic gain is the maximum allowable gain for general RFID applications V...
Antenna - MIMO,multi band Mobile Marks multiband LTM series antennas offer various kinds, from the LTM302 containing three separate anten¬nas,...
Antenna - MIMO,multi band Mobile Marks multiband LTM series antennas offer various kinds, from the LTM302 containing three separate anten¬nas,...
Popular Categories For Mobilemark
Categories For Mobilemark
Popular Items
Popular items
CVL-2400/5500-2C-BLK-96, Mobilemark
The CVL-2400/5500 is a Dual Band WiFi antenna with an innovative overmolded design. It provides WiFi capability on the 2.4-2.5 Ghz and 4.9-6.0 GHz bands. This vertically polarized antenna has 3 dBi peak gain, and terminates with an SMA connector by default. It uses RG-174 cable for the single connection.
Popular items
LTM-302-3C3C2C-WHT-180, Mobilemark
Antenna - MIMO,multi band
Mobile Marks multiband LTM series antennas offer various kinds, from the LTM302 containing three separate anten¬nas, all in one housing, and the LTM402, LTM403 with four separate anten¬nas, plus the LTM502 which have two broadband LTE/Cellular antennas, two dual-band WiFi antennas, and one GPS antenna.
Designed for fleet management systems 7932099 three elements combine a GPS receiver with a two element LTE MIMO modem. Four elements 7932092 incorporates GPS with a single element (non-MIMO) WiFi modem with a two element LTE MIMO modem. RS stock number 7932096 also has four elements but connects GPS with a two element WiFi MIMO modem as well as a single element LTE/Cellular modem.
Systems that require MIMO on the both bands, then need the five element 7932106 with a combination of GPS with both any Global LTE MIMO modem as well as WiFi MIMO modem.
The antenna can be used in LTE MIMO modem systems to send RF signals to increase the data that is being sent and received; helping you achieve optimum performance with the multi band antennas at either end. Single mounting hole offers easy installation, saving space with no need for multiple antennas.
VSWR 2:1, over range
IP rating: IP67
Antenna: 140mm diameter with low profile
Global coverage with the broadband LTE/Cellular element
Radome - ASA UV-Stable Plastic material
IEEE1478, EN61373, MIL-810G, and TIA 329.2-C
Mobile Mark
Popular items
CLTM302-9Y9Y-WHT-12, Mobilemark
Antenna - Ceiling Mount CLTM302
CLTM302-9Y9Y-WHT-12 Ceiling Mount broadband antenna by Mobile Mark is part of the CLTM302 range and configured with two antenna elements. Covers all cellular applications worldwide which include 4G LTE, AWS, UMTS, XLTE, LTE-A, Spark and WiMAX.
Features
2-cables multi-band antenna for Global Cellular/LTE, including MIMO
Antenna clamps to metal ceiling tile grid for easy installation
Low Loss Fire Retardant LMR-195FR cable
Attractive radome; blends in well on ceiling
Mobile Mark
Popular items
RM-WHF-DN-BLK, Mobilemark
RM Series - SMT Antenna,WB
The Mobile Mark wideband antenna series can perform at 3dBi Gain (1.65-2 GHz) or 5dBi Gain (2.1-6 GHz). The RM series antenna can be surface mounted by means of feed through or stud mount types. They can be used in Industrial applications and the direct N Jack version mounts to vehicles, bulkhead and containers. The feed through SMT antenna incorporates ASA radome UV stable plastic, metal base and a gasket in the bottom mounting plate providing a watertight seal. Mobilemarks WB antennas have a frequency coverage range of 1.7-6 GHz. They can be used for 802.11 a/b/g/n, AWS, WIMAX, 4.9 Public Safety and DSRC.
IP67
No requirement for ground plane
Shock and Vibration EN 61373,IEEE 1478,MIL-810G,TIA-329.2-C
Mobile Mark
Popular items
SMD-W-3C3C-WHT-180, Mobilemark
The Mobile mark SMD-W is multiband antenna. SMD-W is MIMO Low profile surface mount antenna. It comes with two feed In frequency bands 2.4 to 2.5 GHz and 4.9 to 6 GHz and with GPS feature.
MIMO Low Profile Surface Mount
IP-7 Water Protection
Popular items
CA120/195-CJ, Mobilemark
Cable Assemblies SMA Series
Mobile Mark RF cable assemblies provide extension capability to standard antennas configurations
Impedance: 50 Ω nominal
CA39-195-CJ (
793-2115
) and CA120/195-CJ (
793-2119
) are both cable jumpers for the directional MIMO Antenna PND8 model (
723-9132
).
Mobile Mark
Popular items
CA197/195-VJ, Mobilemark
The Mobilemark cable LL-195 is the same size cable as RG-58, and uses the same size connectors, with the added feature of lower cable losses. Low Loss-195 would be suitable for cable runs over 15 ft (4.5 meters) or in high frequency applications up to 6 GHz. This is our standard cable for applications above 2.5 GHz
Diameter 2.5 mm
Connector SMA Jack to Rev Pol SMA Plug
Popular items
LMW-UMB-3C2C-WHT-180, Mobilemark
Low Profile Wideband 800-2200MHz with GPS
Multiband antenna for GPS and Cellular Voice/Data including AWS
Worldwide Cellular protocols: GSM, CDMA, GRPS, 1xRTT, EDGE, EV-DO, 3G, 4G, UMTS, AWS as well as Nextel, Trunking &
ISM
Low profile shape; attractive & impact resistant
Rugged case; passes industry and military shock and vibration testing
GSM (Global System for Mobile communications) Antennas
Popular items
PN6-868RCP-3C-WHT-6, Mobilemark
The Mobilemark PN6-868 is a compact, low profile RFID tag antenna that is housed in a weather-tight random. The antenna is suitable for either in-building or outside installation. This PN6-868 features left-hand circular polarization, and would typically be used for RFID applications. It provides a generous pattern of 80 degrees in both azimuth and elevation.
Weatherproof random in-building or outdoor coverage use
6 dBi gain for 915 RFID (US),868 RFID (EU),and 915 ISM
Available in Right Hand and Left Hand Circularly Polarized(CP)
Popular items
RM-433-3C-BLK-12, Mobilemark
The Mobilemark RM-433 surface antenna was designed for wireless transmitters and receivers operating at 433 MHz. The antenna random is a black UV-resistant ASA plastic. The RM-433 meets commercial and military specs for shock and vibration. It also meets dust and water Ingress specs for IP67.
Operates on a 12 (30 cm) metal ground plane
Rugged and attractive ASA radom
Available with BNC interface
Popular items
PN8-868LCP-1C-WHT-12, Mobilemark
RFID 8dBi Panel Antenna PN8 Series
8dBic gain is the maximum allowable gain for general RFID applications
Vertical Tilt adjustment of up to 24-degrees
Mid-range coverage, such as in a warehouse setting
RFID (Radio-Frequency Identification)
Popular items
MAG-1575-2C-BLK-120, Mobilemark
Magnetic Mount GPS Antenna
Magnet version mounts easily to roof or trunk of vehicle
High gain 26 dB active amplifier with low noise characteristics
Sealed polycarbonate case provides weather proofing
Low profile cabling with choice of connector style
GPS (Global Positioning System) Antennas
New Items
New items
CVL-2400/5500-2C-BLK-96, Mobilemark
The CVL-2400/5500 is a Dual Band WiFi antenna with an innovative overmolded design. It provides WiFi capability on the 2.4-2.5 Ghz and 4.9-6.0 GHz bands. This vertically polarized antenna has 3 dBi peak gain, and terminates with an SMA connector by default. It uses RG-174 cable for the single connection.
New items
LTM-302-3C3C2C-WHT-180, Mobilemark
Antenna - MIMO,multi band
Mobile Marks multiband LTM series antennas offer various kinds, from the LTM302 containing three separate anten¬nas, all in one housing, and the LTM402, LTM403 with four separate anten¬nas, plus the LTM502 which have two broadband LTE/Cellular antennas, two dual-band WiFi antennas, and one GPS antenna.
Designed for fleet management systems 7932099 three elements combine a GPS receiver with a two element LTE MIMO modem. Four elements 7932092 incorporates GPS with a single element (non-MIMO) WiFi modem with a two element LTE MIMO modem. RS stock number 7932096 also has four elements but connects GPS with a two element WiFi MIMO modem as well as a single element LTE/Cellular modem.
Systems that require MIMO on the both bands, then need the five element 7932106 with a combination of GPS with both any Global LTE MIMO modem as well as WiFi MIMO modem.
The antenna can be used in LTE MIMO modem systems to send RF signals to increase the data that is being sent and received; helping you achieve optimum performance with the multi band antennas at either end. Single mounting hole offers easy installation, saving space with no need for multiple antennas.
VSWR 2:1, over range
IP rating: IP67
Antenna: 140mm diameter with low profile
Global coverage with the broadband LTE/Cellular element
Radome - ASA UV-Stable Plastic material
IEEE1478, EN61373, MIL-810G, and TIA 329.2-C
Mobile Mark
New items
CLTM302-9Y9Y-WHT-12, Mobilemark
Antenna - Ceiling Mount CLTM302
CLTM302-9Y9Y-WHT-12 Ceiling Mount broadband antenna by Mobile Mark is part of the CLTM302 range and configured with two antenna elements. Covers all cellular applications worldwide which include 4G LTE, AWS, UMTS, XLTE, LTE-A, Spark and WiMAX.
Features
2-cables multi-band antenna for Global Cellular/LTE, including MIMO
Antenna clamps to metal ceiling tile grid for easy installation
Low Loss Fire Retardant LMR-195FR cable
Attractive radome; blends in well on ceiling
Mobile Mark
New items
RM-WHF-DN-BLK, Mobilemark
RM Series - SMT Antenna,WB
The Mobile Mark wideband antenna series can perform at 3dBi Gain (1.65-2 GHz) or 5dBi Gain (2.1-6 GHz). The RM series antenna can be surface mounted by means of feed through or stud mount types. They can be used in Industrial applications and the direct N Jack version mounts to vehicles, bulkhead and containers. The feed through SMT antenna incorporates ASA radome UV stable plastic, metal base and a gasket in the bottom mounting plate providing a watertight seal. Mobilemarks WB antennas have a frequency coverage range of 1.7-6 GHz. They can be used for 802.11 a/b/g/n, AWS, WIMAX, 4.9 Public Safety and DSRC.
IP67
No requirement for ground plane
Shock and Vibration EN 61373,IEEE 1478,MIL-810G,TIA-329.2-C
Mobile Mark
New items
SMD-W-3C3C-WHT-180, Mobilemark
The Mobile mark SMD-W is multiband antenna. SMD-W is MIMO Low profile surface mount antenna. It comes with two feed In frequency bands 2.4 to 2.5 GHz and 4.9 to 6 GHz and with GPS feature.
MIMO Low Profile Surface Mount
IP-7 Water Protection
New items
CA120/195-CJ, Mobilemark
Cable Assemblies SMA Series
Mobile Mark RF cable assemblies provide extension capability to standard antennas configurations
Impedance: 50 Ω nominal
CA39-195-CJ (
793-2115
) and CA120/195-CJ (
793-2119
) are both cable jumpers for the directional MIMO Antenna PND8 model (
723-9132
).
Mobile Mark
New items
CA197/195-VJ, Mobilemark
The Mobilemark cable LL-195 is the same size cable as RG-58, and uses the same size connectors, with the added feature of lower cable losses. Low Loss-195 would be suitable for cable runs over 15 ft (4.5 meters) or in high frequency applications up to 6 GHz. This is our standard cable for applications above 2.5 GHz
Diameter 2.5 mm
Connector SMA Jack to Rev Pol SMA Plug
New items
LMW-UMB-3C2C-WHT-180, Mobilemark
Low Profile Wideband 800-2200MHz with GPS
Multiband antenna for GPS and Cellular Voice/Data including AWS
Worldwide Cellular protocols: GSM, CDMA, GRPS, 1xRTT, EDGE, EV-DO, 3G, 4G, UMTS, AWS as well as Nextel, Trunking &
ISM
Low profile shape; attractive & impact resistant
Rugged case; passes industry and military shock and vibration testing
GSM (Global System for Mobile communications) Antennas
New items
PN6-868RCP-3C-WHT-6, Mobilemark
The Mobilemark PN6-868 is a compact, low profile RFID tag antenna that is housed in a weather-tight random. The antenna is suitable for either in-building or outside installation. This PN6-868 features left-hand circular polarization, and would typically be used for RFID applications. It provides a generous pattern of 80 degrees in both azimuth and elevation.
Weatherproof random in-building or outdoor coverage use
6 dBi gain for 915 RFID (US),868 RFID (EU),and 915 ISM
Available in Right Hand and Left Hand Circularly Polarized(CP)
New items
RM-433-3C-BLK-12, Mobilemark
The Mobilemark RM-433 surface antenna was designed for wireless transmitters and receivers operating at 433 MHz. The antenna random is a black UV-resistant ASA plastic. The RM-433 meets commercial and military specs for shock and vibration. It also meets dust and water Ingress specs for IP67.
Operates on a 12 (30 cm) metal ground plane
Rugged and attractive ASA radom
Available with BNC interface
New items
PN8-868LCP-1C-WHT-12, Mobilemark
RFID 8dBi Panel Antenna PN8 Series
8dBic gain is the maximum allowable gain for general RFID applications
Vertical Tilt adjustment of up to 24-degrees
Mid-range coverage, such as in a warehouse setting
RFID (Radio-Frequency Identification)
New items
MAG-1575-2C-BLK-120, Mobilemark
Magnetic Mount GPS Antenna
Magnet version mounts easily to roof or trunk of vehicle
High gain 26 dB active amplifier with low noise characteristics
Sealed polycarbonate case provides weather proofing
Low profile cabling with choice of connector style
GPS (Global Positioning System) Antennas
Don’t hesitate to ask questions for better clarification.