Rates
10+
£ 71.40
Products Found: 122
Showing Results For: Serial Cable Assemblies
Serial Cable Assemblies
FILTERS
Filters
Showing
1 -
New Items
New items
New items
New items
PLATE25F16LP, Startech
The PLATE25F16LP DB25 to IDC26 Parallel Port Bracket adds a DB25 parallel port to the rear panel of a low profile/small form factor computer, which connects to an IDC26 header connector on the motherboard.Backed by Lifetime Warranty and constructed of only top quality components, our Parallel Port Header Cable offers a cost-effective solution for adding a Parallel device connection using a compatible motherboard.
1x Parallel DB25 (female) connector
1x IDC-26 (female) connector
Cost-effective solution for adding a DB25 parallel port to a low profile/small form factor computer, which eliminates the cost of expensive peripheral upgrades
Applications
Add a 25-pin Parallel port to the back of your low profile/SFF computer
New items
New items
2908529, Phoenix Contact
The Phoenix Contact assembled shielded halogen free round cable has 37 positions with 40 meters length.
Operating temperature range is from -40 °C to 70 °C
IP20 protection class
Pollution degree 2
Overvoltage category II
This article is apart of Phoenix Contact's entire 'Complete Line' range. Complete Line from Phoenix contact is a range designed to bring you the efficiency, ease of use and consistency to your control cabinet. Learn more at
Complete Line Page
.
New items
WV.P-PDN2515, Leunig
Connection cable 25 pin 01:01, 5 → 30 m
Connection and extension cables
Suitable for serial and parallel transfers
High-quality, HF-shielded housing that can be opened
Quick-release screws and anti-kink feature to prevent wire breaks
Gas-tight insulation displacement with at least 40 years of service life
Highly flexible; can be laid in tight spaces
Double-screened special cable
TÜV-type-tested in accordance with fault class 4, cable lengths up to 30 m
25-pin SUB-D plugs / sockets
New items
New items
2053638-1, TE Connectivity
TE Connectivity QSFP+ High Speed Copper Cable Assemblies
QSFP+ (Quad Small Form Factor) high speed copper cable assemblies that use MADISON cable brand twin-axial (TURBOTWIN) copper cable and are able to support data rates of up to 10Gbps per differential pair and support Fibre channel, Ethernet and Infiniband standards. These QSFP+ high speed cable assemblies offer four channels of data providing 3 times the density of SFP/SFP+ ports, have an EPROM signature which can be customized and are MSA compliant. A 60 degree cable braid suppresses EMI and pull tab latching allows belly to belly application, all accept a wire size of 30 AWG. These QSFP+ high speed cable assemblies are compatible with industry standard QSFP cages (see stock numbers
756-1120
,
756-1136
typically).
Typical applications for these QSFP+ High Speed cable assemblies include switches, routers, host bus adapters, enterprise storage, high density I/O's and multiple channel interconnects.
Stock number
775-4874
is a QSFP+ to (4x) SFP+ break out assembly with 1m cable length
Stock number
775-4883
is a QSFP+ to (4x) SFP+ break out assembly with 3m cable length
Stock number
775-4886
is a QSFP+ QSFP+ DDR/QDR unequalized passive assembly with 1m cable length
Stock number
775-4880
is a QSFP+ QSFP+ DDR/QDR unequalized passive assembly with 3m cable length
QSFP+ Connectors and Cable Assemblies - TE Connectivity
The Quad Small Form-factor Pluggable (QSFP) interconnect system from TE Connectivity is a four-channel package, offering 3 times the density of traditional SFP ports and supports speeds up to 10Gb/s per channel (suitable for 8G Fiber Channel and 10G Ethernet). The system is ideal for switches, routers, and host bus adapters (HBA's) where bandwidth is essential.
New items
FFTP-17-D-08.77-01-N, Samtec
Samtec FFTP Series 1.27mm Tiger Eye™ IDC Socket Twisted Pair Ribbon Cable Assemblies
FFTP series Tiger Eye™ IDC socket to socket twisted pair ribbon cable assemblies consisting of a 30 AWG 7/38 twisted pair PVC insulated ribbon cable with a 1.27mm pitch double row female socket either end with highly reliable gold plated IDC Tiger Eye™ contacts and polarizing notch for accurate mating. These FFSD series IDC flat ribbon cable socket assemblies are available with up to 50 contacts and have an assembled length of 3.85 or 8.77 inches.
For mating connectors see FTS, FTSH, EHF and SHF series headers
New items
SFSD-15-28-H-05.00-DR-NUS, Samtec
SFSD Series Discrete Wire Cable Assemblies
These SFSD Series Discrete Wire Cable Assemblies from Samtec are available in a variety of configurations. The cable used for this range of SFSD Series Discrete Wire Cable Assemblies is 28 AWG with Black PVC insulation. The dual row ISDF Series Sockets used for this range of SFSD Series Discrete Wire Cable Assemblies have Tiger Eye Contacts with 0.76 μm Gold plating on the contact area and 0.076 μm Gold plating on the tails.
Socket Housing Insulator Material: Black LCP
Operating Temperature Range: -35 → 80 °C
End Options:
DR
Double End with Retention Latch
NUS
notch up, straight (Pin 1 to Pin N-1)
NUX
notch up, cross pin (Pin 1 to Pin N)
NDS
notch down, straight (Pin 1 to Pin 2)
NDX
notch down, crossed (Pin 1 to Pin 1)
Note
For mating TFM Series Headers see stock number
481-4667
typical.
New items
101112090909002, Acte
Accessories for Cellular Modem/ Cellular Router - Robustel
Robustel
offer a range of accessories for the
GoRugged
cellular routers and cellular gateways. Including a power supply with an input up to 240 V ac and 12 V dc output at 1.5A. The DC output cable is terminated with individual pins so that they mate with the terminal block connectors that are supplied with the Robustel devices. The power supply comes with the UK, EU, USA and Australian adapters.
There are two types of antennas that are suitable for the Industrial cellular ranges. The quad band GSM stubby R/A type and the magnetic mount multiband antenna. They both come with SMA- male connector and mate with the corresponding router/modem.
The RS232 Serial cable has a DB9 male connector to a DB9 female connector and is 2.5 M in length.
Two types of brackets are suitable for the Robustel Go-Rugged series as the devices have threaded screw holes that match the mounting brackets.
Power Supply:
902-6830
Input voltage range: 100 to 240v ac
Output voltage rated at 12v @ 1.5A
Antenna:
902-6812
Mounts directly on to device
Antenna: Quad Band with SMA-Male Right Angle
Supports 2G & 3G devices
Antenna:
902-6818
Magnetic mount
Supports 2G & 3G
2.5 m coaxial RF cable and SMA (male) connecto
RS232 Serial Cable:
902-6815
Suitable for M1000 XP Gateway devices (2G & 3G)
35 mm DIN Rail mounting bracket:
902-6837
Wall mounting bracket:
902-6834
4 x M3 x 6 mm screws supplied
Wall mounting bracket: Fixing centre: approx. 89 mm
Note
Robustel
devices feature either a 2 way or 3 way power-input connector, and are supplied with a matching plug for the connector. They are terminal block type with screws to secure wire or pins.
GSM/GPRS (Mobile Communications) - Robustel
New items
GC9SF, Startech
This Slimline DB9 Gender Changer features two slimline DB9F connectors, offering a reliable, cost-saving way to convert a 9 pin male port to a 9 pin female port. The Slimline DB9 Gender Changer is backed by lifetime warranty, guaranteeing long-lasting performance.
A cost-effective way of converting a 9-pin male port to a 9-pin female port
Easy to use and install
Applications
Converts a 9 pin male port to a 9 pin female port