Featured Products
Workstation Continuous Mini Monitor Small size 70mm x 53mm takes up minimal worksurface area Two 10mm threaded stud...
Circuit Board Shipper Box For storage static sensitive electronic devices Constructed from a unique buried conducti...
Ion Python Controller, Air Nozzle Eliminates ElectroStatic Attraction (ESA) by blowing particles off products...
ESD Clear Cellulose Tape with Symbols and Yellow Stripe Clear cellulose tape with ESD symbols and yellow stripe Pre...
ESD Clear Cellulose Tape ESD Clear cellulose tape Prevents damage to sensitive electronic components in manufacturi...
Statfree 2-Layer Dissipative Rubber Bench Matting Two-layer, static dissipative rubber bench matting suitable for u...
Bench Top Zero Volt Ioniser The EMIT bench top zero volt ioniser is a compact and lightweight steady state DC auto-...
Desco ESD Bench Top Turntable The Desco Gyro-Stat ESD bench top turntable which allows an operator to rotate (bidir...
ESD Clear Cellulose Tape ESD Clear cellulose tape Prevents damage to sensitive electronic components in manufacturi...
ESD Clear Cellulose Tape ESD Clear cellulose tape Prevents damage to sensitive electronic components in manufacturi...
2 Fan Chargebuster Overhead Ioniser Two fan steady state overhead ioniser neutralise electrostatic charges on insul...
3 Fan Chargebuster Overhead Ioniser Three fan steady state overhead ioniser neutralise electrostatic charges on ins...
Popular Categories For Desco Europe
Popular Items
Popular items
CT-8051-3, Desco Europe
Workstation Continuous Mini Monitor
Small size 70mm x 53mm takes up minimal worksurface area
Two 10mm threaded studs installed on bottom of unit permanently snap monitor flush on mat
Uses reliable wave distortion technology: provides true 100% continuous monitoring - no false alarms and no pulsed current
Requires AC adaptor
685-8760
available separately
Requires UK power cord RS
262-1154
or European power cord RS
311-9321
available separately
Popular items
CWE-22322, Desco Europe
Circuit Board Shipper Box
For storage static sensitive electronic devices
Constructed from a unique buried conductive layer of impregnated corrugated fiberboard with a static dissipative surface
Made from 100% recycled material and is 100% recyclable
Note
RS
877-2542
Circuit board box with foam
RS
877-2548
Circuit board box without foam
Popular items
CWE-21343, Desco Europe
Ion Python Controller, Air Nozzle
Eliminates ElectroStatic Attraction (ESA) by blowing particles off products
Adjustable balance for flexibility in use
Optional pin-point nozzle tip included for directing air stream to a localised area
Replaceable air filter keeps air free of contaminants
Adjustable 5 → 100 psi air pressure
Foot pedal controls for hands-free operation
Additional required accessories are UK power cord
426-373
, European power cord
305-784
Note
Power Cord to be purchased separately
Popular items
242277, Desco Europe
ESD Clear Cellulose Tape with Symbols and Yellow Stripe
Clear cellulose tape with ESD symbols and yellow stripe
Prevents damage to sensitive electronic components in manufacturing
For general purpose ESD tape applications
Ideal for sealing ESD bags and other ESD packaging/containers
Thickness 2.4 mil (0.06.mm)
Temperature range: -10°C → +71°C
Standards
EN 61340-5-1, Mil STD-1285, ESD Association
Popular items
242294, Desco Europe
ESD Clear Cellulose Tape
ESD Clear cellulose tape
Prevents damage to sensitive electronic components in manufacturing
For general purpose ESD tape applications
Ideal for sealing ESD bags and other ESD packaging/containers
Thickness 2.4 mil (0.06.mm)
Temperature range: -10°C → +71°C
Standards
EN 61340-5-1, Mil STD-1285, ESD Association
Popular items
228082, Desco Europe
Statfree 2-Layer Dissipative Rubber Bench Matting
Two-layer, static dissipative rubber bench matting suitable for use with constant monitors.
2mm thick this rubber bench matting is solder iron resistant, easy to clean and capable of withstanding most chemicals.
Mats supplied with four 10mm studs
Low reflecting
Bench / Floor Matting
The most efficient way of ensuring optimum personal grounding is to employ the combination of ESD footwear and ESD matting.
Popular items
50670, Desco Europe
Bench Top Zero Volt Ioniser
The EMIT bench top zero volt ioniser is a compact and lightweight steady state DC auto-balancing bench top work surface ioniser with integrated closed-loop feedback.
Steady state DC ionisation and patented Sense Feedback balancing
Compact size
Rapid access maintenance
Automatic balancing of ionisation system
Equipped with audible and visual indicators for "Balance" and "Maintenance Required"
Data acquisition ready
Low offset voltage
Balance ±5 voltage offset, field programmable
Note
Additional accessories
Mounting arm:
761-7141
UK power cord:
426-373
European power cord:
305-784
Stock Number 761-7141 - Suitable for use with EMIT 50670 - stock number 684-2920
Popular items
237193, Desco Europe
Desco ESD Bench Top Turntable
The Desco Gyro-Stat ESD bench top turntable which allows an operator to rotate (bidirectional) heavy, large or awkward assemblies on a bench top, without manual handling of the product. It has pre-installed Statfree T2 dissipative dual layer rubber mat. Three thumbscrew locks that allow the turntable to be locked temporarily, to prevents spinning when required. The base is made of stainless steel material.
Features and Benefits
Can be used on a floor or other surface
Load rating is 100kg
Applications
Industrial application
Popular items
242293, Desco Europe
ESD Clear Cellulose Tape
ESD Clear cellulose tape
Prevents damage to sensitive electronic components in manufacturing
For general purpose ESD tape applications
Ideal for sealing ESD bags and other ESD packaging/containers
Thickness 2.4 mil (0.06.mm)
Temperature range: -10°C → +71°C
Standards
EN 61340-5-1, Mil STD-1285, ESD Association
Popular items
242290, Desco Europe
ESD Clear Cellulose Tape
ESD Clear cellulose tape
Prevents damage to sensitive electronic components in manufacturing
For general purpose ESD tape applications
Ideal for sealing ESD bags and other ESD packaging/containers
Thickness 2.4 mil (0.06.mm)
Temperature range: -10°C → +71°C
Standards
EN 61340-5-1, Mil STD-1285, ESD Association
Popular items
50602, Desco Europe
2 Fan Chargebuster Overhead Ioniser
Two fan steady state overhead ioniser neutralise electrostatic charges on insulators and ungrounded conductors plus is excellent in ESD protected areas. The ioniser has one overhead LED panel providing light and improved visibility to the work area. The 3 speed fan ensures that the ionisation performance is consistent at all speeds and the sealed plenum airflow prevents contamination introduction. An audible and visual alarm system shuts down the ioniser when the supply voltage drop. The visual alarm is displayed through the single Tri-colour LED.
FEATURES and BENEFITS:
Excellent in ESD protected areas
Overhead ioniser
Two fan
Neutralises Electrostatic charges / ungrounded conductors
3 position fan speed, low, medium, high
Sealed plenum airflow
Audible and visual alarm system
Visual alarm – Tri-colured LED
Overhead light 700 Lumen LED – cool white
Automatically shuts off when supply voltage drops
Unit can be used with 110 V or 220 V power sources
3 seconds or less discharge time with +/- 10 V offset voltage
Unit coverage area – 2 x 4 ft
Reduced downtime due to replaceable emitter pins
Standards
ANSI/ESD S20.20, ESD TR53
Popular items
50603, Desco Europe
3 Fan Chargebuster Overhead Ioniser
Three fan steady state overhead ioniser neutralise electrostatic charges on insulators and ungrounded conductors plus is excellent in ESD protected areas. The ioniser has two overhead LED panels providing light and improved visibility to the work area. The 3 speed fan ensures that the ionisation performance is consistent at all speeds and the sealed plenum airflow prevents contamination introduction. An audible and visual alarm system shuts down the ioniser when the supply voltage drop. The visual alarm is displayed through the single Tri-colour LED.
FEATURES and BENEFITS:
Excellent in ESD protected areas
Overhead ioniser
Three fan
Neutralises Electrostatic charges / ungrounded conductors
3 position fan speed, low, medium, high
Sealed plenum airflow
Audible and visual alarm system
Visual alarm – Tri-coloured LED
Two overhead lights 700 Lumen LED – cool white
Automatically shuts off when supply voltage drops
Unit can be used with 110 V or 220 V power sources
3 seconds or less discharge time with +/- 10 V offset voltage
Unit coverage area – 2 x 5 ft
Reduced downtime due to replaceable emitter pins
Standards
ANSI/ESD S20.20, ESD TR53
New Items
New items
CT-8051-3, Desco Europe
Workstation Continuous Mini Monitor
Small size 70mm x 53mm takes up minimal worksurface area
Two 10mm threaded studs installed on bottom of unit permanently snap monitor flush on mat
Uses reliable wave distortion technology: provides true 100% continuous monitoring - no false alarms and no pulsed current
Requires AC adaptor
685-8760
available separately
Requires UK power cord RS
262-1154
or European power cord RS
311-9321
available separately
New items
CWE-22322, Desco Europe
Circuit Board Shipper Box
For storage static sensitive electronic devices
Constructed from a unique buried conductive layer of impregnated corrugated fiberboard with a static dissipative surface
Made from 100% recycled material and is 100% recyclable
Note
RS
877-2542
Circuit board box with foam
RS
877-2548
Circuit board box without foam
New items
CWE-21343, Desco Europe
Ion Python Controller, Air Nozzle
Eliminates ElectroStatic Attraction (ESA) by blowing particles off products
Adjustable balance for flexibility in use
Optional pin-point nozzle tip included for directing air stream to a localised area
Replaceable air filter keeps air free of contaminants
Adjustable 5 → 100 psi air pressure
Foot pedal controls for hands-free operation
Additional required accessories are UK power cord
426-373
, European power cord
305-784
Note
Power Cord to be purchased separately
New items
242294, Desco Europe
ESD Clear Cellulose Tape
ESD Clear cellulose tape
Prevents damage to sensitive electronic components in manufacturing
For general purpose ESD tape applications
Ideal for sealing ESD bags and other ESD packaging/containers
Thickness 2.4 mil (0.06.mm)
Temperature range: -10°C → +71°C
Standards
EN 61340-5-1, Mil STD-1285, ESD Association
New items
242277, Desco Europe
ESD Clear Cellulose Tape with Symbols and Yellow Stripe
Clear cellulose tape with ESD symbols and yellow stripe
Prevents damage to sensitive electronic components in manufacturing
For general purpose ESD tape applications
Ideal for sealing ESD bags and other ESD packaging/containers
Thickness 2.4 mil (0.06.mm)
Temperature range: -10°C → +71°C
Standards
EN 61340-5-1, Mil STD-1285, ESD Association
New items
228082, Desco Europe
Statfree 2-Layer Dissipative Rubber Bench Matting
Two-layer, static dissipative rubber bench matting suitable for use with constant monitors.
2mm thick this rubber bench matting is solder iron resistant, easy to clean and capable of withstanding most chemicals.
Mats supplied with four 10mm studs
Low reflecting
Bench / Floor Matting
The most efficient way of ensuring optimum personal grounding is to employ the combination of ESD footwear and ESD matting.
New items
50670, Desco Europe
Bench Top Zero Volt Ioniser
The EMIT bench top zero volt ioniser is a compact and lightweight steady state DC auto-balancing bench top work surface ioniser with integrated closed-loop feedback.
Steady state DC ionisation and patented Sense Feedback balancing
Compact size
Rapid access maintenance
Automatic balancing of ionisation system
Equipped with audible and visual indicators for "Balance" and "Maintenance Required"
Data acquisition ready
Low offset voltage
Balance ±5 voltage offset, field programmable
Note
Additional accessories
Mounting arm:
761-7141
UK power cord:
426-373
European power cord:
305-784
Stock Number 761-7141 - Suitable for use with EMIT 50670 - stock number 684-2920
New items
242293, Desco Europe
ESD Clear Cellulose Tape
ESD Clear cellulose tape
Prevents damage to sensitive electronic components in manufacturing
For general purpose ESD tape applications
Ideal for sealing ESD bags and other ESD packaging/containers
Thickness 2.4 mil (0.06.mm)
Temperature range: -10°C → +71°C
Standards
EN 61340-5-1, Mil STD-1285, ESD Association
New items
237193, Desco Europe
Desco ESD Bench Top Turntable
The Desco Gyro-Stat ESD bench top turntable which allows an operator to rotate (bidirectional) heavy, large or awkward assemblies on a bench top, without manual handling of the product. It has pre-installed Statfree T2 dissipative dual layer rubber mat. Three thumbscrew locks that allow the turntable to be locked temporarily, to prevents spinning when required. The base is made of stainless steel material.
Features and Benefits
Can be used on a floor or other surface
Load rating is 100kg
Applications
Industrial application
New items
242290, Desco Europe
ESD Clear Cellulose Tape
ESD Clear cellulose tape
Prevents damage to sensitive electronic components in manufacturing
For general purpose ESD tape applications
Ideal for sealing ESD bags and other ESD packaging/containers
Thickness 2.4 mil (0.06.mm)
Temperature range: -10°C → +71°C
Standards
EN 61340-5-1, Mil STD-1285, ESD Association
New items
50681, Desco Europe
Chargebuster Overhead Ioniser
3-fan steady state DC ionisation with sense feedback
120 / 220Vdc input voltage selectable
Audible and visual alarm, displayed through single tri-colour LED
3-position fan speed: Low, Medium, High
Replaceable emitter pins
Supplied without power cord, please order separatly. Power cord with UK plug RS
262-1154
, power cord with EU plug
731-6169
New items
50602, Desco Europe
2 Fan Chargebuster Overhead Ioniser
Two fan steady state overhead ioniser neutralise electrostatic charges on insulators and ungrounded conductors plus is excellent in ESD protected areas. The ioniser has one overhead LED panel providing light and improved visibility to the work area. The 3 speed fan ensures that the ionisation performance is consistent at all speeds and the sealed plenum airflow prevents contamination introduction. An audible and visual alarm system shuts down the ioniser when the supply voltage drop. The visual alarm is displayed through the single Tri-colour LED.
FEATURES and BENEFITS:
Excellent in ESD protected areas
Overhead ioniser
Two fan
Neutralises Electrostatic charges / ungrounded conductors
3 position fan speed, low, medium, high
Sealed plenum airflow
Audible and visual alarm system
Visual alarm – Tri-colured LED
Overhead light 700 Lumen LED – cool white
Automatically shuts off when supply voltage drops
Unit can be used with 110 V or 220 V power sources
3 seconds or less discharge time with +/- 10 V offset voltage
Unit coverage area – 2 x 4 ft
Reduced downtime due to replaceable emitter pins
Standards
ANSI/ESD S20.20, ESD TR53
Don’t hesitate to ask questions for better clarification.