Rates
1+
£ 410.09
Products Found: 124
Showing Results For: Serial Cable Assemblies
Serial Cable Assemblies
FILTERS
Filters
Showing
1 -
New Items
New items
New items
New items
PLATE25F16LP, Startech
The PLATE25F16LP DB25 to IDC26 Parallel Port Bracket adds a DB25 parallel port to the rear panel of a low profile/small form factor computer, which connects to an IDC26 header connector on the motherboard.Backed by Lifetime Warranty and constructed of only top quality components, our Parallel Port Header Cable offers a cost-effective solution for adding a Parallel device connection using a compatible motherboard.
1x Parallel DB25 (female) connector
1x IDC-26 (female) connector
Cost-effective solution for adding a DB25 parallel port to a low profile/small form factor computer, which eliminates the cost of expensive peripheral upgrades
Applications
Add a 25-pin Parallel port to the back of your low profile/SFF computer
New items
New items
2908529, Phoenix Contact
The Phoenix Contact assembled shielded halogen free round cable has 37 positions with 40 meters length.
Operating temperature range is from -40 °C to 70 °C
IP20 protection class
Pollution degree 2
Overvoltage category II
This article is apart of Phoenix Contact's entire 'Complete Line' range. Complete Line from Phoenix contact is a range designed to bring you the efficiency, ease of use and consistency to your control cabinet. Learn more at
Complete Line Page
.
New items
WV.P-PDN2515, Leunig
Connection cable 25 pin 01:01, 5 → 30 m
Connection and extension cables
Suitable for serial and parallel transfers
High-quality, HF-shielded housing that can be opened
Quick-release screws and anti-kink feature to prevent wire breaks
Gas-tight insulation displacement with at least 40 years of service life
Highly flexible; can be laid in tight spaces
Double-screened special cable
TÜV-type-tested in accordance with fault class 4, cable lengths up to 30 m
25-pin SUB-D plugs / sockets
New items
2821222-5, TE Connectivity
Our selection of cable assemblies range from simple jumpers to power and high-speed data cables to complex harnesses. They are used in a wide variety of applications and industries to interconnect components, sub-systems, and equipment.
TEs copper cable assemblies transmit power, video, audio, RF, and high-speed data – they can even provide lightning protection
New items
New items
1-2231368-6, TE Connectivity
TE Connectivitys (TE) zQSFP+ interconnects offer an increased data rate of 28 Gbps NRZ and 56 Gbps PAM-4 in an industry standard, scalable design that allows for backwards compatibility with QSFP+ cables and transceivers, providing a simple upgrade path from 10 Gbps to 28 Gbps and 56 Gbps. The complete portfolio of interconnects deliver a large range of simple and customizable design options to meet most customer requirements
Data transfer rates of 28 Gbps NRZ and 56 Gbps PAM-4
Supports Ethernet and InfiniBand (IB) Enhanced Data Rate (EDR) requirements
Supports single channel, dual channel and quad channel implementations
Industry Standard and Customizable Design
Industry standard interface
Backwards compatible with QSFP+ cables and transceivers
Improved loss budget for optics and copper cables at 10 Gbps
Comprehensive Portfolio and Inventory
Dual sourced product available through Molex, LLC.
Features behind and through bezel cages with various lightpipe and heat sink options
New items
2053638-1, TE Connectivity
TE Connectivity QSFP+ High Speed Copper Cable Assemblies
QSFP+ (Quad Small Form Factor) high speed copper cable assemblies that use MADISON cable brand twin-axial (TURBOTWIN) copper cable and are able to support data rates of up to 10Gbps per differential pair and support Fibre channel, Ethernet and Infiniband standards. These QSFP+ high speed cable assemblies offer four channels of data providing 3 times the density of SFP/SFP+ ports, have an EPROM signature which can be customized and are MSA compliant. A 60 degree cable braid suppresses EMI and pull tab latching allows belly to belly application, all accept a wire size of 30 AWG. These QSFP+ high speed cable assemblies are compatible with industry standard QSFP cages (see stock numbers
756-1120
,
756-1136
typically).
Typical applications for these QSFP+ High Speed cable assemblies include switches, routers, host bus adapters, enterprise storage, high density I/O's and multiple channel interconnects.
Stock number
775-4874
is a QSFP+ to (4x) SFP+ break out assembly with 1m cable length
Stock number
775-4883
is a QSFP+ to (4x) SFP+ break out assembly with 3m cable length
Stock number
775-4886
is a QSFP+ QSFP+ DDR/QDR unequalized passive assembly with 1m cable length
Stock number
775-4880
is a QSFP+ QSFP+ DDR/QDR unequalized passive assembly with 3m cable length
QSFP+ Connectors and Cable Assemblies - TE Connectivity
The Quad Small Form-factor Pluggable (QSFP) interconnect system from TE Connectivity is a four-channel package, offering 3 times the density of traditional SFP ports and supports speeds up to 10Gb/s per channel (suitable for 8G Fiber Channel and 10G Ethernet). The system is ideal for switches, routers, and host bus adapters (HBA's) where bandwidth is essential.
New items
FFTP-17-D-08.77-01-N, Samtec
Samtec FFTP Series 1.27mm Tiger Eye™ IDC Socket Twisted Pair Ribbon Cable Assemblies
FFTP series Tiger Eye™ IDC socket to socket twisted pair ribbon cable assemblies consisting of a 30 AWG 7/38 twisted pair PVC insulated ribbon cable with a 1.27mm pitch double row female socket either end with highly reliable gold plated IDC Tiger Eye™ contacts and polarizing notch for accurate mating. These FFSD series IDC flat ribbon cable socket assemblies are available with up to 50 contacts and have an assembled length of 3.85 or 8.77 inches.
For mating connectors see FTS, FTSH, EHF and SHF series headers
New items
SFSD-15-28-H-05.00-DR-NUS, Samtec
SFSD Series Discrete Wire Cable Assemblies
These SFSD Series Discrete Wire Cable Assemblies from Samtec are available in a variety of configurations. The cable used for this range of SFSD Series Discrete Wire Cable Assemblies is 28 AWG with Black PVC insulation. The dual row ISDF Series Sockets used for this range of SFSD Series Discrete Wire Cable Assemblies have Tiger Eye Contacts with 0.76 μm Gold plating on the contact area and 0.076 μm Gold plating on the tails.
Socket Housing Insulator Material: Black LCP
Operating Temperature Range: -35 → 80 °C
End Options:
DR
Double End with Retention Latch
NUS
notch up, straight (Pin 1 to Pin N-1)
NUX
notch up, cross pin (Pin 1 to Pin N)
NDS
notch down, straight (Pin 1 to Pin 2)
NDX
notch down, crossed (Pin 1 to Pin 1)
Note
For mating TFM Series Headers see stock number
481-4667
typical.