Discounted Products

Acti9 Auxiliaries The electrical auxiliaries are combined with iC60 circuit breakers, iID residual current circuit breakers, remote tripping switch disconnector iSW-NA , RCA remote controls and ARA automatic reclosers; they enable tripping or remote indication of their position (open/closed/tripped) upon a fault Tripping auxiliaries: iMN: undervoltage release iMNs: delayed undervoltage release iMNx: undervoltage release, independant from supply voltage iMX: shunt release iMX+OF: shunt release with open/close contact. Indication auxiliaries: iOF: open/close contact iSD: fault indicating contact iOF/SD+OF: open/close contact and switchable OF or SD contact.

OPTI Durable Series The new DS-I Series UPS provides premium double-conversion back up power and scalable battery runtimes for IT and electrical engineering infrastructure in corporate, healthcare, banking and industrial applications. The entire DS-I Series provides value to customers with demandi ng power environments, including very wide input voltage window, extremely tight output voltage regulation, frequency regulati on, internal bypass, and input power factor correction. Which is perfectly serve their purpose in Servers and Workstation, applicances and small business users Zero transfer time Wide range of input frequency (40∼70HZ) and Output frequency 50/60HZ setting High-performance DSP processor, precision and fast data processing with high reliability Cold start (DC power on) Auto reboot functions Extended battery pack for long service life RS232 and USB port SNMP card slot available The UPS should be charged once every 4 to 6 months if it has not been used for a long time In the regions of hot climates, the battery should be charged and discharged every 2 months. The standard charging time should be at least 12 hours Battery replacement should be performed by qualified personnel Replace batteries with the same number and type of batteries Do not replace the battery individually. All batteries should be replaced at same time following the instructions of the battery supplier Battery maintenance: 1-3KVA UPS only requires minimal maintenance OPTI - On Line

RELAY SOCKET 3PDT TRACK MT MK

The SKF shims are made up of high quality stainless steel. It is easy to fit and remove. Fully de-burred Close tolerances for accurate alignment

RK163 Potentiometer with Metal Shaft Brought to you by Alps, the RK163 series of potentiometers each have a robust construction with an end slotted metal shaft. Conforming to an industry standard size and boasting excellent performance characteristics, the RK163 series of potentiometers are suitable for various applications.Features and Benefits: Linear or logarithmic tracks Single or dual units Mounting bush 7.35, L.7 Dual gang tracking error, -40dB to 0dB: 3dB max.Supplied with metal nut and washer

TIMER SS MINI 4PDT 10SECONDS

Alkaline manganese batteries are suitable for various applications such as toys, medical devices and health appliances. All models are 100% made in Japan, and environmentally friendly (0% mercury). Excellent cost performance High cost performance has been achieved owing to the use of manganese dioxide as a cathode material. Excellent stable discharge and high-drain pulse discharge characteristics Stable voltage output is available during the high-drain pulse discharge. Excellent leakage resistance Murata-unique sealing structure, coupled with special sealing-material treatment, has helped accomplish the excellent leakage resistance. Applications Medical Insulin pumps Thermometers Drug delivery systems Others Electronic calculator Toys

BSP Reducers Reducing thread adaptors with male (Rs) BSP parallel thread to female (Rp) BSP parallel thread. Male thread is sealed at the port connection with a nitrile rubber seal. Operating temperature range without pressure reductions is -30 to +100°C. Manufactured from steel to BS5200 with a zinc yellow chromated finish to give a high corrosion resistance (500 hours in salt spray test). The 60° female cone makes these adaptors an ideal port fitting for use with our range of BSP reusable fittings and crimped hose assemblies. Features and Benefits Visible bite of progressive ring helps prevent blow-off Excellent sealing capacity when used in various applications including vacuum and hydraulic systems Stress evenly distributed throughout out minimising concentration at the bite point Compact overall dimensions make EO fittings ideal or confined spaces Note For adaptors of unequal sizes then the lower pressure rating is applicable. Standards DIN 3852 Warning Hydraulic systems can work at high pressures, and fittings and adaptors can be subjected to extreme loadings such as vibration and uncontrolled pressure peaks. When choosing fittings or adaptors careful attention should be given to the technical specifications.

Si1141/42/43 Proximity/Ambient Light Sensor Modules The Silicon Labs Si1141/42/43 combines an active optical reflectance proximity detector with an ambient light sensor and an infrared LED into a single 10-Pin QFN package. Their dual port operation enables reliable proximity detection for moving as well as stationary objects. The Si1141 has 1 LED driver with an Integrated IR LED - RS 8920016. The Si1142 has 2 LED drivers with and integrated IR LED - RS 8920025. The Si1143 has 3 LED drivers with and integrated IR LED - RS 8920028. With the Si1143, locate three infrared LEDs in an L-shaped configuration to enable triangulation of an object and in turn, via host software, creating a gesture based user interface. These modules have photodiodes which can be used to measure both visible and infrared light. Detect levels as low as 6 lux. - Adjustable proximity detection from 1 cm to over 50 cm - Up to 3 independent LED drivers - 15 current settings from 5.6 mA to 360 mA per driver - 25.6 μs LED driver pulse width - High EMI immunity without shielded packaging - Low power consumption Sensor Interfaces, Silicon Laboratories

IC RF TXRX+MCU BLUETOOTH

3M™ Dual Lock™ Reclosable Fastener Blister IPC SJ387B Black Strength The design of the 3M™ Dual Lock™ SJ387B hook and loop tape is made of mushroom-shaped stems. When the stems have combined they interlock together, thus generating five times the closure strength of a typical hook and loop fasteners. The SJ387B hook and loop tape contains 40 mushroom-shaped stems per cm² (250 per square inch). When the two strips are pressed together the tape is only 6.1 mm thick. When joined, the stem snaps back into its original position, interlocking with the opposing heads. This system can be opened and closed 1000 times before losing 50% of the original tensile strength. No drilling, screwing, tightening, or complex installation The Dual Lock™ tape uses a modified acrylic adhesive that bonds well to a variety of materials, including some plastics, metal, glass, and painted surfaces with very little preparation needed. The quick adhesion ensures easy installation without the use of a mechanical attachment process. Once bonded the interlocked, mushroom-shaped stems may hold as well as screws and rivets, yet separate easily for access. The 3M SJ387B tape features an acrylic foam tape protected by a removable liner. This ensures the construction allows for better contact with surfaces having a slight texture or surface irregularities. Versatile, durable and invisible There's no limit to the number of uses for this tape, with the stems, mushroom tops, and a red film backing. Temperatures between -29 °C and 82 °C will have minimal impact on the performance of this hook and loop tape. Features and Benefits A black fastener with mushroom shaped stems, backed with a modified acrylic pressure sensitive adhesive Type 250 mates to Type 170, 250 or 400. Closes with an audible snap Five times the tensile strength of typical hook-and-loop fasteners Opens and clos...

Schneider Cat 6A FTP Actassi RJ45 Shielded Connector with S-One Footprint Cat6A Actassi RJ45 shielded jack connector with S-One footprint. This Cat6 RJ45 jack has an integrated one piece design, supports 1000BASE-T applications, PoE+ andVoIP (Voice IP) protocols and is compatible with F/UTP, S/FTP, SF/UTP, U/FTP and F/FTP LAN cable types. Standards ISO/IEC 11801 Ed2.1 ANSI/TIA-568-C.2 EN 50173:2007 IEC 60603-7-51 ISO/IEC 11801:2011 Ed.2.2 Schneider Range

RS Pro ESD pliers Range of ESD electronic pliers manufactured to exacting DIN standards. Features and Benefits ESD Protected for conducting away static electricity All pliers are of box joint design Manufactured from high grade steel Smooth non-serrated jaw Made in Germany Standards DIN ISO9655

DIN HIGH-TEMP RECEPTACLE 96POS

CONN PLUG MALE 3POS SOLDER CUP

CONN SPADE TERM 14-16AWG M3.5

Idealtek ESD Full Plastic Carbofib Tweezers These handcrafted Swiss tweezers are made for high precision work from ESD safe plastic carbofib (CF). They benefit from perfect tip symmetry and balance and are perfect for the electronic industry, watch-makers, jewellers and laboratory applications. PA66/CF30 polyamide 66 reinforced with 30 wt% carbon fibre Heat stabilised Very high rigidity, excellent tensile and flexural strength, fatigue and creep resistance Low friction, self-lubricating properties, excellent wear and abrasion resistance Good heat capability Good chemical resistance (oils, grease, fuels, non-polar solvents) ESD safe material Typical applications include handling of sensitive components and devices

TE Connectivity PIDG Faston 250 Receptacle Wire Crimp Terminals PIDG (Pre-Insulated Diamond Grip) FASTON 250 receptacle wire crimp terminals designed for uniform reliability in the most difficult circuit environments. These PIDG receptacle terminals consist of a precision-formed high conductivity copper body and barrel. The wire barrel is surrounded with both a copper and nylon colour coded sleeve. The copper sleeve surrounding the barrel provides improved wire insulation support after crimping allowing the wire to bend without fraying the insulation or breaking the conductor. The nylon sleeves are colour coded according to wire-size to assist with identification. Inside the PIDG receptacle terminal wire barrel are serrations which provide maximum contact and tensile strength after crimping. The construction of these PIDG terminals and the use of specialised tool dies allows for uniform insulation thickness under crimping pressure. This pressure is then transmitted evenly to the centre of the crimping area to produce a uniform and reliable crimp. These PIDG receptacle terminals also feature a funnelled wire entry which prevents turned back wire strands and allows fast wire insertion during high-speed production. Available with various wire sizes, these PIDG receptacle terminals offer a versatile solution to a wide range of wiring applications High conductivity copper body Copper sleeve for improved wire insulation support Serrations in wire barrel for maximum contact and tensile strength Colour coded sleeves for easy wire size and tooling identification Funnelled wire entry for easy wire insertion Designed enables a reliable and uniform crimp Application These PIDG wire terminals are suitable for use in a wide range of applications with many terminals meeting or exceeding the requirements of MIL-T-7928, Type II, Class 1 and 2. Applications include i...

Polyamide Enclosure IP65 Small control enclosures of polyamide and reinforced with 30% glassbead Available with or without cable glands RAL 7035 Recessed area for membrane keypads Approvals 8888

RES 47 OHM 50W 5% TO220

CONN SOCKET 22-26AWG CRIMP GOLD

TIMER SS MINI DPDT 5SECONDS