Discounted Products

Mini-Fit Junior 4.2mm Crimp Receptacle and Plug Housings Mini-Fit Junior 4.2 mm pitch crimp receptacle and plug housings which form part of the Mini-Fit Junior power connectors interconnection system. Mini-Fit Junior power connectors are able to handle up to 9A per circuit making them ideal for use in high current applications. These Mini-Fit Junior crimp housings have fully isolated terminals for protection against, debris, arcing and damage caused by mishandling. The housings incorporate polarization and keying features to prevent misalignment and mismating. A positive locking mechanism consisting of an easy to operate thumb latch provides a secure connection with the mating connector. This positive locking mechanism prevents accidental unmating caused by excessive shock or vibration. An audible click indicates that the connector is fully mated. These Mini-Fit Junior 4.2 mm plug and receptacle housings are available with a UL94V-0 or UL94V-2 housing material, a range of contact configurations and accept standard Mini-Fit and Mini-Fit Plus crimp terminals Features and Benefits • Can handle Up to 9A current per circuit • Fully isolated terminals • Polarization and keying to prevent mismating • Positive locking mechanism for secure mating connection • Audible click for mating confirmation Product Application Information Mini-Fit Junior power connectors are ideal for use in high current, high density wire to wire and wire to board applications that require design flexibility. Applications include consumer white goods, office equipment, industrial automation equipment, industrial networks, rack-mount servers, routers and switches. Molex Minifit Jr.™ Series

Series ED02 Pressure Regulator Poppet type valve Analogue control 0-10V or 4-20mA IP65 0 °C → +50 °C M12, 5 pin electrical plug connections Requires oil free (0-1mg/m 3 max) dry air filtered to 50μm Rexroth Electro-Pneumatic Regulators

VESTA TW9 GEN 2

Schroff Rack Panels Snap-in Blanking Panels • Easy tool-less installation • Ensure proper airflow to equipment • Made of UL approved thermal plastic material • Low-gloss textured black finish • Use with tapped or square EIA universal spaced rack mounting angles • RoHS compliant Clip-on Front Panels • Attractive design • Simple fitting by clipping onto the 19 in plane • Front panels (6 U) can be snapped off in 1, 2 or 3 U increments without tools • Colour black • RoHS compliant Supplied with Either 10 Clip-on or Snap-in 19 in rack panels.

The DCCM-15P6E518.0B-LF is a 0.050-inch (1.27mm) Density Solder Cup/Wire Cinch Dura-Con D Cable Assembly with 15-way micro-D plug on one end and free leads on the other end. 26AWG wire, copper alloy with gold plating. Metal shell provides EMI/RFI shielding capability Diallyl phthalate glass-reinforced insulator Screw mount metal shell MIL-W-16878/4, 7-strand wire Color-coded per MIL-STD-681, system 1 (stranded wire) insulation or wire finish Applications Industrial

RS PRO 80W Analogue Soldering Station, 230V +200°C to +480°C Features and Benefits Simple design with user-friendly interface Quickly adjust temperature via adjustment knob with light indication to identify desired temperature Rapidly heats up to desired temperature Complete with soldering iron and holder MCU controlled temperature calibration and PID system equipped to ensure temperature stability Adjustable temperature of 200 to 480℃ 80W power rating Easy to replace pluggable heater making it highly economical Low voltage AC helping to reduce interference, leakage and ensure it is anti-static Power supply included Application DIY Engineering Automotive Electrical What is included? Why RS PRO?

RELAY GEN PURPOSE 3PDT 10A 24V

LOAD CELL 5KG STRAIGHT BAR TAL22

LOW PEAK CC TIME DELAY

CONN HEADER 36POS GOLD PCB BLACK

FAN AXIAL 60X38MM 12VDC WIRE

CAP TANT 0.22UF 50V 10% RADIAL

MMU 0102 - Professional Advanced thin film technology Excellent overall stability: exceeds Class 0.25 Force fitted steel caps, tin plated on nickel barrier Pure Sn termination on Ni barrier layer Compatible with lead (Pb)-free and lead containing soldering processes Case Type 0102 Technology Thin Film Resistance Tolerance 1% Power Rating 0.2W Temperature Coefficient 50 ppm/°C Operating Temperature -55 → 125 °C Approvals EN 140401-803 Approvals EN 140401-803 Metal Electrode Leadless Face SMT Resistors

UNIV CONTROL CAB KEY-PEN STYLE

Domed Head POP® Rivets Aluminium POP® Rivets Standard open type domed head rivet, for general purpose use Aluminium alloy (3·5% magnesium) body, carbon steel mandrel Steel POP® Rivets Standard open type domed head steel rivet Increased strength and temperature resistance Carbon steel body and mandrel Premium Quality Steel POP® Rivets Mandrel head retention Excellent hole fill capabilities Large blind side bearing area High shear and tensile values to standard steel products Carbon steel body and mandrel Stainless Steel POP® Rivets Standard open type domed head stainles steel rivet Increased strength and temperature resistance Good corrosion resistance Stainless steel body and mandrel Description Rivet Size (mm) Grip Range (mm) Flange Dia. (mm) Stock no. Aluminium 3.2 3.2-4.8 6.65 351-3212 Aluminium 3.2 6.4-7.9 6.65 351-3228 Aluminium 4.0 4.8-6.4 8.22 351-3234 Aluminium 4.0 7.9-9.5 8.22 351-3240 Aluminium 4.8 4.8-6.4 9.80 351-3256 Aluminium 4.8 9.5-11.1 9.80 351-3262 Steel 3.2 3.2-4.8 6.65 351-3335 Steel 4.0 3.2-4.8 8.12 351-3341 Steel 4.8 3.2-4.8 9.80 351-3357 Steel 4.8 4.8-6.4 9.82 351-3379 Stainless Steel 3.2 1.6-4.8 6.65 351-3385 Stainless Steel 3.2 3.2-4.8 6.65 351-3391 Stainless Steel 4.0 3.2-6.4 8.33 351-3408 Stainless Steel 4.8 1.6-3.2 9.98 351-3414 Stainless Steel 4.8 3.2-6.4 9.98 351-3436 Stainless Steel 4.8 6.4-9.5 9.98 351-3442

Feed-Through Blocks 2.5mm² with Screw Connection for TS35 Mounting, Type WT 2.5 Phoenix Contact Selos WT Series feed-through DIN rail terminal block with screw connection for mounting on TS 35; nominal cross section 2,5 mm²; width 5 mm in a selection of colours. Selos

The Werma Signal Technik mini adaptor is the new modular, simple and clear standard solution for the signalling sector. The materials used for housing are PC/ABS. It is RoHS compliant. Operating temperature is from -30°C to +60°C Type 12 UL Rating Pollution degree 3

Perma-Lock Dry Lube-F FPS CRC Perma-Lock food grade dry lube is a grease and oil free lubricant designed for you to use when a wet film lubricant cannot be used. Features and Benefits Attached secure spray straw gives more control on application and gives access to hard to reach parts Locked on actuator cannot detach High temperature resistance Insoluble in water Non-oily Typical Applications Plastic drives Sliding mechanisms Pneumatic tools Note Allow to dry at room temperature Refer to datasheet and SDS for more information and applications CRC Perma-Lock Food Grade Range All industries have issues with lubricant leakage and maintenance. Production equipment needs excellent lubrication to keep machines running, so choosing the correct lubricant is crucial. The food processing and pharmaceutical industries have extra challenges with ensuring that the lubricants used resist degradation from food products, chemicals and steam/water. They must exhibit a neutral behaviour towards plastics and elastometers, have the ability to dissolve sugars and complying with current food/health and safety regulations meaning that they are physiologically inert, tasteless and odourless. The Perma-Lock range from CRC is a non-detachable, 2 way spray system meaning that nothing can fall off. The new look food processing safe products have been designed to reduce the risk of food contamination and expensive recalls. Perma-Lock lubricants and oils all have a secure spray straw that locks in place giving you better control and precise application whatever position you use.

Steel Flat Head Rivet Nuts POPNut® Threaded Inserts can be installed into sheet-metal, tubing, extrusions, plastics and other materials to provide an internal thread for subsequent component assembly. The body has optimum length for minimum blindside protrusion The flat head provides a good bearing area for application surface Used for general purpose applications with higher temperature resistance

F1 UN Series Professional range of Bernstein limit switches from the F1 UN series. All models are made from aluminium diecast and are highly reliable and excellent quality. Features & Benefits Cable entry: M20 x 1.5 Protection rating IP65/67 Aluminium diecast enclosure Actuator: Foot lever

ACRYL RAL marking paint Anti-rust acrylic paint. High-quality, quick-drying, glossy acrylic paint. May be used both indoors and outdoors on metal, wood, plastic surfaces, etc. This range covers all your needs for applications in industry, DIY, etc. Available in RAL, high temperature, metallic, primary and chromed colours. Standards -

Schneider Electric Acti9 iC60N MCBs 1 Pole Acti 9 Schneider iC60N series multi-standard circuit breakers combine circuit protection against short circuit currents and circuit protection against overload currents it also protects people against indirect contact with TN and IT neutral systems. Fully compliant with standards IEC/EN 60898 and IEC/EN 60947-2. ACTi 9 is fully tested, approved and certified by national and international third parties. It guarantees that your installation is safe and compliant with all relevant safety standards which demonstrates to your customers that you use industry-approved materials and best practices. These MCBs are normally used for high inductive loads where switching surges are high. Providing essential protection in industrial and commercial buildings, these miniature circuit breakers work especially well in polluted environments and networks. VisiSafe guarantees the downstream circuit is always safe regardless of overvoltage conditions, even in the most demanding environments; the green strip indicates the safe position of contacts. VisiTrip red window on the front face indicates fault tripping allowing fast diagnosis, resolution, and reclosing loads for easier building management and reduced downtime Benefits and Features • Downstream circuit is always safe • Class-2 insulation: ensures continuous protection for both operators and unqualified persons • Insulated terminals (IP20) • Highly durable with robust connections that provide twice the standard tightening torque • Provide greater continuity of service thanks to VisiTrip. • Double clip for dismounting with comb busbar in place Standards IEC 60898 - Relates to Low Voltage Circuit Breakers for use in household and similar Installations. In the UK traditionally known as miniature circuit breakers (MCB’s). IEC 60947-2 Relates to Low Voltage Circuit Br...