Discounted Products

160A, 320A, Connector housing with contacts and auxiliaries Mechanically keyed colour coded housings prevent accidental mating of equipment operating at different voltages Auxiliary contacts provide the ability to incorporate a secondary sensor control unit Genderless design Flat wiping contacts UL voltage rating 150 V Pair auxiliary contacts Silver plated contacts offer longevity when using high power Single piece housing Capable of 10000 connect / disconnect cycles

The CRC fast-drying primer for hard plastics. Ensures the best adhesion and economical consumption of CRC Acrylic Paint on plastic, which saves time and money. For indoor and outdoor use. Very fast-drying: topcoat can be applied after 15 minutes (at 20°C, 50% relative air humidity) Ensures the best adhesion and economical application of the topcoat on plastic Flexible nozzle for easy application Variable output: adapt the output to your desire Results in a smooth surface Easy to apply and user friendly Suitable for indoor and outdoor applications

EVO7 Series Cable Tie Tensioning Tools An ergonomic cable tie application tool, reducing the cutting effort.The EVO 7 cable tie tool has the ability to lock each tie in place at the desired tension prior to cutting. Because the tension is fixed at the trigger when squeezed, only a low amount of hand force and a shorter range of motion is required to cut through each tie with minimal kickback. Key Features • Tensions and cuts cable with ease • Simple blade replacement • Cut with no protrusions to damage neighboring components • Ergonomic design with secure and comfortable grip handle • Extended slim nose for use in narrow spaces • Easy to use trigger • Easily adjust tension settings • Plastic lightweight fibreglass reinforced housing • Standard grip span (90 mm) and short grip span (80 mm) available

2011 - Multi Purpose Epoxy - Long Working Life Colour - Pale yellow Excellent Impact resistance Room temperature curing, high strength and toughness Versatile and excellent resistance to dynamic loading Ideal for large areas of bonding and/or a long working time Applications Ferrous and Non-Ferrous Metals; Polyamides; Polystyrene Foams, PU Foams; Ceramics; Wood

CAP ALUM 10UF 20% 50V RADIAL

TE Connectivity SMA RF Coaxial Cable Connectors – Clamp Termination SMA RF coaxial plug and jack cable connectors for with a lightweight, compact design ideal for use in applications where space is limited. These SMB RF coaxial cable connectors offer an excellent electrical performance from DC to 18 GHz with an interface is that is fully compatible with MIL-C-39012. The threaded coupling mechanism of these SMA RF coaxial cable connectors provides a secure vibration proof connection. These SMA RF coaxial cable connector use a MIL-clamp cable termination which offers a robust connection and allows assembly in the field wihtout the need for any special tooling. SMA RF coaxial cable connectors are constructed from stainless steel or brass with a choice of platings including, nickel, gold and white bronze for use in different applications. Features and Benefits • Subminiature space saving design • Excellent electrical performance from DC to 18 GHz • Threaded vibration proof coupling mechanism • MIL-clamp cable termination for robust connection and easy assembly • Choice of platings dependent on application Applications These SMA RF coaxial cable connectors are for use in the wireless telecommunications industry. Applications include radio, mobile phone and WiFi antennas, base stations, instrumentation, PC/LAN, fixed and broadcast Satellite Communications, Standard Frequency and Time Satellite Gold Plated Connectors with stainless steel bodies and gold plating, which will mate with connectors conforming to MIL-C-39012 and BS 9210 N0006. Available for a variety of cable sizes, mounting configurations and cable and contact termination arrangements. Good high frequency performance at high power ratings in small diameters Connector variants suitable for semi-rigid or flexible cab...

SENSR OPTO SLOT 3.18MM DARL THRU

Barrel Pumps Choice of two barrel pumps, designed for use with 40 gallon metal drums, which will pump up to Hypoid 90 viscosity Lever action pump ( RS 672-425 ) incorporates 84cm galvanised steel suction tube, discharge hose optional extra Rotary action pump ( RS 672-419 ) incorporates 96cm steel suction tube and comes with M24 x 4mm retention adaptor

IC REG LINEAR 5V 1.5A TO220AB

35 WATT AC/DC, INDUSTRIAL, 88-26

PANDRIVE NEMA17, 28V, 0.27NM

Ferraz Shawmut - Mersen 1000Vdc Photovoltaic Fuses and Accessories Engineered to Protect in Photovoltaic Applications. Mersen offer a range of photovoltaic fuses and fuse holders that are designed specifically for this application. This range benefits from enhanced fuse construction which allow for continuous temperature and current cycling withstand.Protect your off-grid and grid tied PV systems using Mersen's Photovoltaic fuses. Applications: PV string/array level protection Combiner box applications In-Line PV module protection. Inverters Battery Charge Controllers. Low Fault current interrupting capability Durable Construction. Temperature cycle withstand capability. Guaranteed operation at temperature extremes. Note Modulostar Fuse holders recommendations. Do not Operate under load. The PV source must be connected to the upstream termina. Photovoltaic Fuses and Accessories

IC MCU 8BIT 3.5KB FLASH 18DIP

RES 14.3 OHM 1/4W 0.1% AXIAL

THT-750-403-WT (0.75"X100')

HEADER

CABLE ASY D TO WIRE 15P 457.2MM

Diamond-Tip Fiber Optic Scribe Quality fiber optic scribes featuring a protective retractable barrel with pocket clip Stainless steel mounted diamond tip These scribes are specially made for the “scratch and pull” technique of scribing optical fiber Scribes

Model 18D Electro-mechanical pressure switch's for connecting and disconnecting electronic circuits utilising pressure. Norgren's 18D pressure monitoring switches reliably monitor minimum pressure and are equipped with automatic switch off and pressure limit warning. Suitable for use in pneumatic, hydraulic and vacuum systems. Gold-plated microswitch contacts High number of switching cycles permissible Designed for pressure monitoring in hydraulic systems Designed to withstand vibrations up to 15G Suitable for intrinsically safe operation ATEX version (Stock No. 622-3647 ) Technical Specification Contact Rating (ac) Contact Rating (dc) Accuracy/Repeatability Maximum Frequency of Operation (cycles/min) Fixed Hysteresis Temperature Range (°C) Environmental Protection 5A @ 250 Vac inductive (3A0 resistive) 0.25A @ 250 V(dc) ±3% of Set Pressure 120 - -20 to +80 - Approvals UL; CSA Pressure Switches Pressure switches that allow microswitch operation once a pre-set pressure is reached. K and K3 Series incorporate a mechanical stop providing over-pressure protection for the spring and microswitch. Electrical connections for all models to DIN 43650. Warning Observe switching range. Do not subject switch to maximum allowable pressure during normal operation. Short pressure peaks must not exceed this value.

MF JR RECEPT 6CKT SPL POLZ BLACK

ebm-papst DC Compact and Standard Axial Fans Professional Range of ebm-papst DC compact and standard axial fans. Impeller Material of fibreglass-reinforced plastic (PA) Air exhaust over bars for direction of air flow with various bearings (Ball, Sleeve, Sintec) Protected against reverse polarity and locking

SIMATIC DP, Connection plug for PROFIBUS up to 12 Mbit/s 90° cable outlet, Insulation displacement method FastConnect, With PG receptacle 15.8x 59x 35.6 mm (BxHxD).

CONN PIN RCPT .025-.037 SOLDER

BRD SPT SNAP LOCK NYLON 3/8"

PLUG, 3P LATCHED POKE-IN WTW CON