Discounted Products

FACOM MICRO-TECH® 60° ANGLED RIGID NOSE GRIPPERS

Turck EZ-LIGHT K50 LED Beacons Turck Banner EZ-LIGHT K50 series LED beacons are DC operated indicators that provide extremely bright lighting for indoor and outdoor indicator functions. Made from a rugged polycarbonate base and translucent polycarbonate dome the K50 series suitable for use in a wide range of applications and environments. IP67 ratedRugged, cost-effective and easy-to-install indicatorsCompact devices are completely self-contained - no controller neededImmune to EMI and RFI interferenceIntense levels of light output for outdoor applications

HDP20 Plugs Size 12 Contacts 25A Size 16 Contacts 13A Size 20 Contacts 7.5A HDP20 Range A range of Heavy Duty thermoplastic, multipole, circular, sealed connectors.,Available in 2 sizes ranging from 8 to 47 ways, in standard or `reverse sex` options.,Straight or right angled clam shell backshells accepting a variety of conduit sizes are also available. Uses Deutsch solid contacts size 12, 16 and 20 depending on the planform selected. For suitable contacts see for example, size 12 (stock no. 425-828), size 16 (stock no. 425-761), size 20 (stock no. 425-834). For a suitable crimp tool see stock no. 425-973. Sealed to IP67 Durable – 100 mating cycles minimum Vibration proof – 20g's at 10 - 2000Hz Corrosion Resistant – 48hours Salt Spray to MIL STD 1344

Precise counting:The automatic reference weight optimisation of reference weight gradually improves the average piece weight value Programmable using numerical key pad: required reference quantity known reference weight Three displays for total weight (verifiable), piece weight, total count Counting results memory:adds up all individual piece counts, result is shown in total weight and total pieces Audible Fill-to-target:target quantity or target weight can be programmed, e.g. for check weighing. When the target value is reached, a signal will sound PRE-TARE function for manual subtraction of a known container weight, value can be saved High mobility:thanks to battery operation (optional), compact, flat construction and low weight, it is suitable for use in several locations (production, warehouse, dispatch department,...)

Steel Funiture Lock Closure for Padlocks Rotary Lock, steel Panel thickness max. 12 mm Bright chrome, satin chrome, bright nickel finish For use with padlockable personal lockers etc.

PCB Switch Kit A rotary switch mechanism with adjustable stop which will take up to a maximum of five extra wafers from the variety available A spacer kit is available to maintain a 6.35mm pitch between individual wafers Terminal spacing is on a 2.54mm pitch. The switch is supplied fitted with a non-interchangeable drive wafer Shaft diameter 6mm All wafers are break before make Note The 'spacers' contain a selection of items - qty 10 spacers, qty 2 front insulators, qty 1 rear driver shafts, qty 1 retaining strap, qty 2 tie rods, and qty 2 push-on fixings.

CONN PLUG MALE 3POS SOLDER CUP

RS Insulated Twin Entry Bootlace Ferrules Insulated twin entry wire end ferrules that provide termination for 2 or more wires. These insulated twin entry bootlace ferrules are made from copper tube with nylon insulation which is colour coded to indicate different wire sizes. Tooling Guide Stock no. Tool Stock no. Tool Orifice (mm²) Stock no. Tool Stock no. Tool Orifice (mm²) 311-7971 453-331 0.75 311-7993 297-2935 6 184-9654 453-331 1.5 311-8003 297-2935 10 184-9660 453-331 2.5 311-8019 297-2935 14 311-8025 453-331 - 311-8025 - - 184-9682 453-331 4 Approvals -

CONN TERM BLK END PLATE RAIL BG

HEADER

IC REG LINEAR 5V 1.5A TO220AB

35 WATT AC/DC, INDUSTRIAL, 88-26

Ferraz Shawmut - Mersen 1000Vdc Photovoltaic Fuses and Accessories Engineered to Protect in Photovoltaic Applications. Mersen offer a range of photovoltaic fuses and fuse holders that are designed specifically for this application. This range benefits from enhanced fuse construction which allow for continuous temperature and current cycling withstand.Protect your off-grid and grid tied PV systems using Mersen's Photovoltaic fuses. Applications: PV string/array level protection Combiner box applications In-Line PV module protection. Inverters Battery Charge Controllers. Low Fault current interrupting capability Durable Construction. Temperature cycle withstand capability. Guaranteed operation at temperature extremes. Note Modulostar Fuse holders recommendations. Do not Operate under load. The PV source must be connected to the upstream termina. Photovoltaic Fuses and Accessories

RS Pro French Colour Code Multi Compartment Kits RS Pro presents two handy crimp terminal kits of an assortment of our popular insulated bootlace ferrules covering the sizes of 0·5 mm² through to 10 mm². The kits will ensure you are equipped when it comes to terminating conductors for electrical connections. The ferrules are French colour coded and kits contain the stock numbers shown in table below. Kit 1 contains ferrules only ( 228-0321 ) Kit 2 contains ferrules and a plier crimp tool for crimping sizes 0.75 to 10 mm 2 ( 266-0288 ) Features and Benefits • Portable, compact and uncluttered storage in minimum space • Both kits contain 8 Ferrule compartments • Plastic see-through cover • Marked compartments, sorted by size and ease of selection Why should you use ferrules? • Ferrules are the preferred alternative to twisting wire strands or tinning wire extremities prior to termination. • It minimises the possibility of an unreliable connection • Prevents conductor breakage due to bending, wire stress or vibration" Application information • Automotive and transportation industry • Building automation • Renewable energy • OEM’S (panel fabrication) • Home DIY purposes" French Colour Code Wire size Colour 0.5 mm² White 0.75 mm² Blue 1.0 mm² Red 1.5 mm² Black 2.5 mm² Grey 4.0 mm² Orange 6.0 mm² Green 10 mm² Brown Kit Contents Stock no. Size Qty. Stock No. Size Qty. 458-689 0.5 mm² 200 458-724 2.5 mm² 100 458-695 0.75 mm² 200 458-730 4.0 mm² 50 458-702 1.0 mm² 200 458-897 6.0 mm² 30 458-718 1.5 mm² 200 157-1244 10.0 mm² 20

Model 18D Electro-mechanical pressure switch's for connecting and disconnecting electronic circuits utilising pressure. Norgren's 18D pressure monitoring switches reliably monitor minimum pressure and are equipped with automatic switch off and pressure limit warning. Suitable for use in pneumatic, hydraulic and vacuum systems. Gold-plated microswitch contacts High number of switching cycles permissible Designed for pressure monitoring in hydraulic systems Designed to withstand vibrations up to 15G Suitable for intrinsically safe operation ATEX version (Stock No. 622-3647 ) Technical Specification Contact Rating (ac) Contact Rating (dc) Accuracy/Repeatability Maximum Frequency of Operation (cycles/min) Fixed Hysteresis Temperature Range (°C) Environmental Protection 5A @ 250 Vac inductive (3A0 resistive) 0.25A @ 250 V(dc) ±3% of Set Pressure 120 - -20 to +80 - Approvals UL; CSA Pressure Switches Pressure switches that allow microswitch operation once a pre-set pressure is reached. K and K3 Series incorporate a mechanical stop providing over-pressure protection for the spring and microswitch. Electrical connections for all models to DIN 43650. Warning Observe switching range. Do not subject switch to maximum allowable pressure during normal operation. Short pressure peaks must not exceed this value.

ebm-papst DC Compact and Standard Axial Fans Professional Range of ebm-papst DC compact and standard axial fans. Impeller Material of fibreglass-reinforced plastic (PA) Air exhaust over bars for direction of air flow with various bearings (Ball, Sleeve, Sintec) Protected against reverse polarity and locking

Line Shaft SpoolsTransfer Spool For 25mm diameter shafts to transfer power to drive bandsSpeed-up Spool Increases the speed of 25mm diameter shaftsIdeal for creating a gap between two productsNote 5 items per bag

CONN TERM BLK FEED THRU 2-12 AWG

TE Connectivity PIDG Faston 250 Receptacle Wire Crimp Terminals PIDG (Pre-Insulated Diamond Grip) FASTON 250 receptacle wire crimp terminals designed for uniform reliability in the most difficult circuit environments. These PIDG receptacle terminals consist of a precision-formed high conductivity copper body and barrel. The wire barrel is surrounded with both a copper and nylon colour coded sleeve. The copper sleeve surrounding the barrel provides improved wire insulation support after crimping allowing the wire to bend without fraying the insulation or breaking the conductor. The nylon sleeves are colour coded according to wire-size to assist with identification. Inside the PIDG receptacle terminal wire barrel are serrations which provide maximum contact and tensile strength after crimping. The construction of these PIDG terminals and the use of specialised tool dies allows for uniform insulation thickness under crimping pressure. This pressure is then transmitted evenly to the centre of the crimping area to produce a uniform and reliable crimp. These PIDG receptacle terminals also feature a funnelled wire entry which prevents turned back wire strands and allows fast wire insertion during high-speed production. Available with various wire sizes, these PIDG receptacle terminals offer a versatile solution to a wide range of wiring applications High conductivity copper body Copper sleeve for improved wire insulation support Serrations in wire barrel for maximum contact and tensile strength Colour coded sleeves for easy wire size and tooling identification Funnelled wire entry for easy wire insertion Designed enables a reliable and uniform crimp Application These PIDG wire terminals are suitable for use in a wide range of applications with many terminals meeting or exceeding the requirements of MIL-T-7928, Type II, Class 1 and 2. Applications include i...

CONN SPADE TERM 14-16AWG M3.5

Low Smoke Halogen Free Single Core Cable - H07Z-K A flexible low smoke halogen free single core cable for internal wiring Intended for installation within conduits and trunking, as well as internal wiring within appliances and fittings Can be used in all areas where in an event of fire a protection of people and equipment is paramount Flame retardant in accordance to IEC 60332-1-2 Smoke density in accordance to IEC 61034 Halogen free in accordance to IEC 60754-1 Working voltage 450/750V Test Voltage 2500Vac Temperature range -15°C → +90°C

The CRC fast-drying primer for hard plastics. Ensures the best adhesion and economical consumption of CRC Acrylic Paint on plastic, which saves time and money. For indoor and outdoor use. Very fast-drying: topcoat can be applied after 15 minutes (at 20°C, 50% relative air humidity) Ensures the best adhesion and economical application of the topcoat on plastic Flexible nozzle for easy application Variable output: adapt the output to your desire Results in a smooth surface Easy to apply and user friendly Suitable for indoor and outdoor applications

Idealtek ESD Full Plastic Carbofib Tweezers These handcrafted Swiss tweezers are made for high precision work from ESD safe plastic carbofib (CF). They benefit from perfect tip symmetry and balance and are perfect for the electronic industry, watch-makers, jewellers and laboratory applications. PA66/CF30 polyamide 66 reinforced with 30 wt% carbon fibre Heat stabilised Very high rigidity, excellent tensile and flexural strength, fatigue and creep resistance Low friction, self-lubricating properties, excellent wear and abrasion resistance Good heat capability Good chemical resistance (oils, grease, fuels, non-polar solvents) ESD safe material Typical applications include handling of sensitive components and devices

Si1141/42/43 Proximity/Ambient Light Sensor Modules The Silicon Labs Si1141/42/43 combines an active optical reflectance proximity detector with an ambient light sensor and an infrared LED into a single 10-Pin QFN package. Their dual port operation enables reliable proximity detection for moving as well as stationary objects. The Si1141 has 1 LED driver with an Integrated IR LED - RS 8920016. The Si1142 has 2 LED drivers with and integrated IR LED - RS 8920025. The Si1143 has 3 LED drivers with and integrated IR LED - RS 8920028. With the Si1143, locate three infrared LEDs in an L-shaped configuration to enable triangulation of an object and in turn, via host software, creating a gesture based user interface. These modules have photodiodes which can be used to measure both visible and infrared light. Detect levels as low as 6 lux. - Adjustable proximity detection from 1 cm to over 50 cm - Up to 3 independent LED drivers - 15 current settings from 5.6 mA to 360 mA per driver - 25.6 μs LED driver pulse width - High EMI immunity without shielded packaging - Low power consumption Sensor Interfaces, Silicon Laboratories