Discounted Products

TIMER SS MINI DPDT 5SECONDS

TIMER MINI 24DC 60S

Mueller SMD Breakout Cable Comprehensive range of positive & negative test leads which provide the user with a variety of SMD breakout & testing options. Comprising of 76mm or 200mm lead options and either PP or nylon insulators dependant on the application environment. Comes supplied with a double banana plug to insulated alligator clips SMD Breakout Cable Assemblies

1S Servo Drives Professional range of 1S servo drives from Omron. The sysmac general purpose single phase servo drives are compatible for 1S Servo motors making up the 1S servo system designed to optimise the full cycle. All 1S servo drives are reliable and excellent quality.Features & Benefits 230 V ac single phase: 100 W to 1.5 kW 23-bit resolution encoder Fast and secure screw-less push in in all connectors Pluggable connectors for easy pre-wiring and system maintenance Direct wiring of I/O signals Embedded relay for direct motor brake control Improved loop control for overshoot and quick setting time Safety function built in: Network Safe Torque Off: PLd (EN ISO 13849-1), SIL2 (IEC 61508) Hard wired Safe Torque Off: PLe (EN ISO 13849-1), SIL3 (IEC 61508)Omron Servo Motors & Drives

Standard Stainless Steel Hinges Stainless steel riveted pin for additional security Supplied with stainless steel sheet metal countersunk screws

CAP CER 0.047UF 16V Y5V 0402

DLX Series Chassis Connectors All metal housing gives greater overall RF protection and shielding Duplex ground contact improves contact integrity between chassis and cable connector Warning Not to be used as mains connectors

RS LED Floodlight IP65 Rated High quality outdoor LED floodlights at competitive price. LED flood lights use up to 70% less power compared to traditional lamps. The RS LED floodlights also have an average life which is up to 5 times longer compared to traditional floodlights. These luminaires are also eco-friendly with virtually no UV, IR, lead, mercury or air pollution. Good heat dissipation performance. IP65 rating. Service life over 50000 hours. Durable and completely corrosion resistance aluminium casing Toughened glass Energy-saving up to 70% compared to traditional floodlights

CAP PUSHBUTTON ROUND RED

Sibille introduces electrical safety mats in the personal protective equipment range, insulating mats insulates the worker from the ground to avoid him/her being crossed by electrical current in case of direct contact or pace voltage. The choice of the class must be determined according to the maximal nominal voltage of the network (IEC 61111 annex A). Simple use and maintenance rules must be respected (IEC 61111 annex B). The marking colour is made according to the colour coding of the IEC 61111. Dimensions are (600x1000)mm [LxB] & weighs 1.84Kg Maximum operating voltage(AC) for class 0 is 1000 V AC Thickness of insulating mat is 1.5mm Elastomer with a new, more scratch-resistant formulation Slightly rough surface with grey colour

HRS (Hirose) JR13 Series Connectors Current Rating 5A for 5 Way and 10A for 3 Way Working Voltage 250V a.c., 350V d.c. Withstand Voltage 1000V a.c. (for 1 min.) Insulation Resistance 1000MΩ min. Contact Resistance 5mΩ max. Insulator Material Phenolic resin Contact Material Silver plated copper alloy Dimensions (mm) Cable Mounting Panel Mounting Plug Socket Plug Socket Dia. 21.8 21.8 n/a n/a Length 45.5 45.5 n/a n/a Width n/a n/a 26 26 Height n/a n/a 26 26 Depth n/a n/a 26.1 27 Cable entry 8.5(max) 8.5(max) n/a n/a Fixing centres n/a n/a 20x20 20x20 Panel cut-out dia. n/a n/a 16.0 16.0 Standards JIS C 5432 Hirose JR Range Conforming to the Japanese standard JIS C 5432, these precision screened connectors are designed for use in professional audio applications such as mixing desks and recording equipment. Robust in construction, all connectors have aluminium alloy bodies and solder bucket contacts. Both cable and panel mounting plugs and sockets are available. Note Insert is removed from connector body using a 1.27mm (0.05 in.) hexagon key (stock no. 609-590 ).

MS-LFR Series Filter Regulators A combined pressure regulator and filter from Festo. The MS4 and MS6 pneumatic filter regulators remove contaminates from compressed air down to a particle size of 5 μm or 40 μm (dependent on filter cartridge). Available in pressure ranges 0.3 bar to 7 bar and 0.5 bar to 12 bar, the MS series filter regulators have a high flow rate and integrated return flow for exhausting air from port 2 to port 1. Available with G1/8 or G1/4 ports. Features and Benefits Constant output pressure with return flow Choice of fully auomatic or manual drain Plastic or fully intergrated metal bowel guard Can be fitted with analogue pressure gauge or sensoro with LCD display Rotary knob with detent can be locked to prevent setting changes Regulators and Filter Regulators

Pushbutton Head - Flush / Booted Flush / Projecting Suitable for Harmony XB5 plastic bodies Approvals UL, CSA Standards IEC, JIS Schneider Electric ZB5-A (Harmony®) 22mm

TLS-GD2 Solenoid Interlock Switch, for Demanding Applications Features & Benefits Note The TLS-GD2 is a positive mode, tongue operated guard locking interlock switch that locks a machine guard closed until power is isolated and ensures that it remains isolated while the guard is open. The switch has three safety (N.C.) contacts and two auxiliary (N.O.) contacts. The head of this interlock switch has two entry slots and it can be rotated to provide four actuator entry points. A blanking plug is provided to seat the unused slot. The guard may only be opened when a signal is applied to the TLS-GD2 internal solenoid which releases the lock mechanism. Therefore this solenoid interlock switch is ideal for machines which do not stop immediately or where premature interruption of the machine could cause damage to tooling and components or cause an additional hazard. The safety switch is available in three types. The TLS-1 GD2 and TLS-3 GD2 incorporate a power-to-release function. Two manual release points with security screws allow the locked TLS-GD2 to be released in emergencies. An optional lid-mounted key-release style can also be supplied. The TLS-2 GD2 has a power-to-lock function. Each type of switch has five sets of contacts of various forms and are suitable for use with PLCs. The TLS-1 GD2 and TLS-3 GD2 are both available with escape release options. They are intended for machine guarding with full body access. The switch is installed so that the escape release push button on the rear side is accessible from inside the hazardous area. This allows the intentional unlocking of the TLS-GD2 from inside a hazardous area, providing a means of escape for a person who may become trapped. A stainless-steel actuator guide is fitted to protect the switch from actuator damage due to poor guard alignment or guard wear. TLS-GD2 has an ingress protection rating ...

Steel Funiture Lock Closure for Padlocks Rotary Lock, steel Panel thickness max. 12 mm Bright chrome, satin chrome, bright nickel finish For use with padlockable personal lockers etc.

Acrylic Conformal Coating – APL APL is a flexible, fast drying transparent acrylic conformal coating, used for the protection of electronic circuitry. A flexible, transparent acrylic conformal coating Excellent adhesion to most substrates Good dielectric properties - prevents arcing Resistant to mould growth UV trace for ease of inspection Totally removable with solvents - ULS May be safely soldered through for ease of repair Use thinner when spraying Note Rs Stock - 448174, The primary use of UAT is to dilute coatings for use in dip and spray coating applications

PCB Switch Kit A rotary switch mechanism with adjustable stop which will take up to a maximum of five extra wafers from the variety available A spacer kit is available to maintain a 6.35mm pitch between individual wafers Terminal spacing is on a 2.54mm pitch. The switch is supplied fitted with a non-interchangeable drive wafer Shaft diameter 6mm All wafers are break before make Note The 'spacers' contain a selection of items - qty 10 spacers, qty 2 front insulators, qty 1 rear driver shafts, qty 1 retaining strap, qty 2 tie rods, and qty 2 push-on fixings.

Sensor Head Fitted with a conical, UV stable, impact resistant, translucent coverOmni-directionalNEMA connectionReplacement for sensors using NEMA Rotaloc SocketDaylight Lighting Controllers These controllers automatically turn lights 'ON' and 'OFF' in response to changes in ambient light levels, primarily the transition from day to night and vice-versa. The more advanced types (see note below) have inbuilt logic to minimise false triggering, whereas the remainder have inbuilt time delays or higher 'OFF' thresholds, to prevent on/off cycling. As a general rule, these controllers should be sited such that they are not illuminated, by the light they are controlling. Nominal supply voltage is 230Vac.,Note regarding energy-saving negative-hysteresis controllers,Where figures for the 'OFF' threshold are lower than for the 'ON' threshold, the sensor is designed such that four thresholds are actually monitored. These are: dusk, the middle of the night, dawn and the middle of the day. Monitoring at times other than dusk and dawn enables the sensor to determine what it should be looking for next, minimising false triggering and improving overall controller operation.

Mini-Fit Junior 4.2mm Crimp Receptacle and Plug Housings Mini-Fit Junior 4.2 mm pitch crimp receptacle and plug housings which form part of the Mini-Fit Junior power connectors interconnection system. Mini-Fit Junior power connectors are able to handle up to 9A per circuit making them ideal for use in high current applications. These Mini-Fit Junior crimp housings have fully isolated terminals for protection against, debris, arcing and damage caused by mishandling. The housings incorporate polarization and keying features to prevent misalignment and mismating. A positive locking mechanism consisting of an easy to operate thumb latch provides a secure connection with the mating connector. This positive locking mechanism prevents accidental unmating caused by excessive shock or vibration. An audible click indicates that the connector is fully mated. These Mini-Fit Junior 4.2 mm plug and receptacle housings are available with a UL94V-0 or UL94V-2 housing material, a range of contact configurations and accept standard Mini-Fit and Mini-Fit Plus crimp terminals Features and Benefits • Can handle Up to 9A current per circuit • Fully isolated terminals • Polarization and keying to prevent mismating • Positive locking mechanism for secure mating connection • Audible click for mating confirmation Product Application Information Mini-Fit Junior power connectors are ideal for use in high current, high density wire to wire and wire to board applications that require design flexibility. Applications include consumer white goods, office equipment, industrial automation equipment, industrial networks, rack-mount servers, routers and switches. Molex Minifit Jr.™ Series

Busbar Feeder Three-phase busbar systems provide an easy, time-saving and clearly arranged means of feeding 3RV2 motor starter protectors with screw terminals. The system can be used with various types of motor starter protectors up to 32 A. The 3RV19 15 three-phase busbar systems are generally unsuitable for the 3RV21 motor starter protectors for motor protection with overload relay function and for the 3RV27 and 3RV28 circuit breakers according to UL 489/CSA C22.2 No.5-02. The busbars are suitable for between 2 and 5 motor starter protectors/circuit breakers. However, any kind of extension is possible by clamping the connection tags of an additional busbar (rotated by 180°) underneath the terminals of the respective last motor starter protector. A combination of motor starter protectors of different sizes is possible. The motor starter protectors are supplied by appropriate feeder terminals.

VR68 Series, Axial VR68 Series are high Ohmic/High Voltage Metal Glaze Leaded Resistors A metal glazed film deposited on a high grade ceramic High pulse loading capability (10 kV) Small size (0718) Pure tin plating provides compatibility with Lead -free and Lead containing soldering processes Applications: Where high resistance, high stability and high reliability at high voltage are required; Safety component in combination with high voltage; Picture tubes; High voltage bleeders; Cascade switches Rated dissipation at 70°C 1W Resistance tolerance 5% Temperature coefficient 200ppm/°C Limiting element voltage 10000Vdc / 7000Vrms Insulation resistance 10 4 MΩ Operating temperaturenge -55 → 70°C Body length 19mm Body diameter 6.8mm Lead diameter 0.78mm

HDP20 Plugs Size 12 Contacts 25A Size 16 Contacts 13A Size 20 Contacts 7.5A HDP20 Range A range of Heavy Duty thermoplastic, multipole, circular, sealed connectors.,Available in 2 sizes ranging from 8 to 47 ways, in standard or `reverse sex` options.,Straight or right angled clam shell backshells accepting a variety of conduit sizes are also available. Uses Deutsch solid contacts size 12, 16 and 20 depending on the planform selected. For suitable contacts see for example, size 12 (stock no. 425-828), size 16 (stock no. 425-761), size 20 (stock no. 425-834). For a suitable crimp tool see stock no. 425-973. Sealed to IP67 Durable – 100 mating cycles minimum Vibration proof – 20g's at 10 - 2000Hz Corrosion Resistant – 48hours Salt Spray to MIL STD 1344

55 Series A range of printed circuit mount or plug in mount general purpose 2, 3 & 4 Pole relays from the Finder 55 series. 2 pole 10A, 3 pole 10A and 4 pole 7A AC coils & DC coils Cadmium free contacts (preferred version) Contact material options PCB mount socket available see stock no. 245-2324 Approvals UL/C-UL recognised; VDE

Cable Tie Tool for Stainless Steel Ties A high quality and cost-effective tensioning and cutting tool for stainless steel cable ties of up to 12mm width. Features and Benefits Easy and comfortable to use and hold Tension and manually cut stainless steel cable ties Flush cutting High quality For use with cable ties up to 0.3 mm thick and 12.3 mm wide