Discounted Products

3 Pole Contactors, DC Controlled Built-in coil suppression 3 N/O poles Auxiliary contact configuration one N/O, one N/C Operating time closing 12 to 22 ms Operating time opening 4 to 19 ms Note Contactors suffixed BL accept front mount auxiliary contact blocks but only the 2 contact version, they do not accept side mounted contacts. Approvals UL and CSA

8mm Sub-miniature Illuminated Push-button Switches 8mm contact indicators for panel mounting LED illumination, Suitable LEDs are supplied separately Indicators are available in both square and round styles Solder Tab terminals LEDs A range of LEDs specifically for use with this sub-miniature indicator series Current should be limited to 20mA by use of a suitable external resistor as detailed at the beginning of the Optoelectronics/Indicators section. VF @ IF 20mA=1.7V (red), 2.1V (green) and 2.2V (yellow) Note: When not illuminated, the green LED appears to be yellow. Lenses Two-part lenses comprising a diffuser and a coloured transparent front cover. Diffuser may be marked to indicate switch function, etc Contact Rating 100 mA @ 50 Vac; 72 Vdc Contact Resistance 50mΩ (max) IP Rating 40 Operating Temperature Range -25 to +55 °C Mechanical Life 2 x 16 6 operations Note Square and round bezel indicators do not include a lens, switch or LED. Suitable lenses need to be ordered separately.

The Chemtronics Techspray Isopropyl Alcohol (IPA) Wipes is use as flux removers (defluxers) remove flux residues and other contaminants left by manufacture, rework, or repair of printed circuit boards. It also removes residues from higher, lead free temperatures are more baked on and harder to clean. Techspray flux removers have been proven very effective at removing fluxes baked on at lead free temperatures. 99.8% pure IPA Ideal for electronics cleaning Plastic-safe Low linting & tear resistant

Stainless Steel Cable Ties These stainless steel cable ties are an ideal alternative where nylon cable ties are not suitable. 316 Stainless steel has excellent resistance to abrasion, corrosion, radiation, weathering and extremes of temperature. They have a greater load carrying capacity and may be used for general strapping applications. Features and Benefits • Available in uncoated and polyester coated stainless steel • Flame retardant • High tensile strength • Self-locking design • Excellent resistance to high temperature, chemicals, weather and abrasion Applications Suitable for applications in industries such as oil and gas, marine, chemical and maintenance. Approvals ABS, DNV, Lloyd's, UL Standards IEC 62275 (2006), UL-1565

T Series

SENSOR LOGIC NOT SUB-BASE MOUNT

100-C 24V DC Coil Operating Contactors The Bulletin 100-C IEC contactor has a wide range of common accessories which provide a compact and flexible starter component system. Max. switching voltage 690V (rated voltage) AC3 24Vdc coil draws 200W inrush, upto 16W Hold in Electrical Life: 1.3 million operations 3 pole, 1 NO auxiliary contact on sizes 4 to 11kW Built-in surge suppression Note Please ensure the power supply and any contacts used in the circuit can withstand 8.3A surge current Standards IEC947, EN60 947, VDE0660, UL508, CSA22.2. Allen Bradley MCS (Modular Control System) Contactors A modular motor control system allowing users flexibility to design and construct an adaptable system. It has been designed to take in to account the demands and requirements of modern motors and their users; satisfying requirements up to 85AC3. A wide range of accessories are also available to cater for many diverse needs. The ease of assembly, installation and modification can bring many benefits not only those related to cost, but can reduce the number of parts which need to be held. The compact size of the component parts, bring other benefits including reduction in enclosure volume required, modern design and weight savings are also gained. By applying a modular design concept and an easy to fit 'clip-in' method, all add to the class leading features and benefits of the MCS system. DIN Rail Surface Mounting

AC Over-Door Heaters (Warm Air Curtains) Designed for localised heating around open doors Can be used as a high level fan heater Adjustable airflow direction Full heat, half heat and fan-only settings Designed for single doors Optimum mounting height 1.8 to 2.3 m

Toggle Switches, Ultra-Min, Washable Vertical and two types of right angle terminations available Suitable for low level switching applications Totally sealed, suitable for immersion cleaning Wave solderable, will withstand 260°C for 5 seconds Gold plated brass terminals Brass actuator and PBT case Minimum load current: 10mA at 50mV - 10μA at 5Vdc Number of operations: 60000 (2 pos), 30000 (3 pos) Note For biased switches '(on)' refers to momentary 'on' position. Momentary function (spring-loaded return): The switch or contact breaker returns to its original position when the load is removed. E.g. bell push) Stay-put function : The switch or contact breaker remains (stop) in the new position after the load has been removed.

CP95 / CP96 - Accessories

MC1, Coded Non-contact actuation Magnetic coded sensing High tolerance to misalignment 2 N/C reed safety outputs Switching current: 200 mA @ 24Vdc IP67 protection rating Category 1 device per EN 954-1, dual channel contacts suitable for Cat 3 or 4 systems Standards EN954-1, ISO13849-1, IEC/EN60204-1, NFPA79, EN1088, ISO14119, IEC60947- 5-1, IEC/EN60947-5-3, ANSI B11.19, AS4024.1

Spiraband Mandrel An expanding rubber mandrel expands when in use to grip an abrasive spiraband 6mm diameter shaft Accepts 25mm wide bands Note Minimum speed is that required to effectively expand the mandrel in use.

CKE Series Counting Scales Professional range of the CKE Series counting scales with self-explanatory graphic control panels. RS232 Data Interface. Suspended weighing. Strain gauge.

Cage Spring High quality cage spring plugs. The nickel plated brass, plug body is fitted with a beryllium copper cage spring. The insulation being moulded in polyethylene. The plug body accepts cables up to 4mm diameter.

Tente Twin Wheel Furniture Castor Twin wheel furniture castors from Tente have been designed to attach to most furniture fittings and improve roll performance. The wheel body is made from polyamide and they have a blind hole to enable them to be attached to most furniture fittings. Available as swivel and swivel with wheel brake. The centre of the wheel is made from polyamide with a polyurethane tread and precision ball bearing. Features and Benefits •Temperature range -10 °C to 40°C •Hardness of tread: Shore A92 •Blind hole for furniture fittings •Load capacity 100 kg •Twin wheel •Blind hole for B10 fitting Product Application Information Ideal for use with baby chairs and shop fitting systems.

MISTRAL65 Consumer Units The new range of MISTRAL65 consumer units allow almost any type of electrical distribution system to be implemented in industrial, commercial and residential environments. The consumer units are manufactured in a halogen-free thermoplastic which is completely recyclable. The range includes solutions with transparent or opaque doors which open up to 180°, and a choice of between 4 and 72 modules, meeting the most recent regulatory requirements and ensuring an enormous variety of application types are covered. The refined design is marked by some particular characteristics, for example the perfect symmetry, which allows either the whole consumer unit or just the front panel to be rotated, easily changing the door opening side. In the multi-row versions, the centre distance of the DIN rails can be varied from 150 mm to 125 mm, further increasing the versatility of the product and using the same standard accessories. The frame is extractable for quick and easy bench cabling. The ample internal space makes the cables more accessible, facilitating cabling and giving the possibility to anchor the cable ties to special eyeholes on the frame. The consumer units are designed to house optional dedicated terminal blocks in two different colour schemes to allow quick and tidy cabling, and making separate power supplies easily recognisable, when used. The range is completely coordinated with ABB MCBs and MCCBs, all of which can be easily installed simply by moving the rail provided for their housing. The project design also aimed to optimise cabling, assembly and installation times of the consumer units. Everything has been designed to make the installer's job quicker and easier, allowing them to implement functional and tidy switchboards. The 180° door opening facilitates total accessibility to the inter...

RS Pro Mini Printer Table • Stable metal frame • Printer shelf and floor shelf • Mobile via 4 castors, 2 of which are lockable • Load bearing capacity up to 30 kg • Colour; frame light grey, surface and border white

Technics Diagonal Tool Bag Technics diagonal tool bag made from tough reinforced fabric, padded and adjustable shoulder strap for comfort. Offers a mobile phone pocket plus inner and outer pockets. Features and Benefits • Made from reinforced material to minimise wear and tear • Adjustable diagonal shoulder strap • Inner and outer pockets and compartments to secure tools • Mobile phone pocket Application Information Technics Diagonal Tool Bag is the ideal tool bag that offer high performance in DYI or trade applications. Technics Tool Storage

CONN TERM BLK FEED THRU 8-24 AWG

Leak Detector Spray Detects even the smallest leaks For use with all gases Harmless to all metals and most plastics and rubbers Convenient and accurate in difficult to reach areas, such as airbrake systems Working procedure; spray on to pipe, watch for bubbles, wipe off residue or wash and wipe dry Residue should not be left on gas or oxygen pipes Warning Non-flammable propellant.

Male Connector - KQB2 Series Threaded, Tube-to-Tube & Adaptors - SMC KQB2 KQB2 Electroless Nickel-Plated Brass Fittings Especially suitable for use within environments where fluctuating temperature changes occur, SMC KQB2 electroless nickel-plated pneumatic fittings are light weight and compact. Benefits KQB2 fittings are grease-free and may be used with a variety of tubing including nylon, soft nylon, polyurethane, polyolefin, FEP and PFA.

SRB-EXi, ATEX Safety RelaysA new generation of safety relay modules that combine the approved safety technique with the demands of explosion protection. Designed for equipment of the category 2GD. Emergency stop devices and safety door monitors may be used in gas and dust explosive atmosphere. Suitable for emergency stop control devices and guard door monitoring1 or 2 channel controlOptional cross short monitoringCurrent and voltage limitation of input - intrinsically safeGreen LED display

AmpFLEX™ Power Quality Clamp Compatible with all PEL and Qualistar Power Quality Analysers including the: CA8333, CA8336, CA8345 and the PEL 103. The Chauvin Arnoux AmpFLEX™ range offers various clamping diameters, lengths and a measurement range of 0.5 A to 10 kA ac. The patented system enables the instrument to recognise the clamp, which provides an easy connection with faster and more accurate measurements. Model Measurement Range Length Clamping Diameter IEC 61010 A193-450A 100 mA → 10 kA ac 450 mm 140 mm 1,000V CAT III / 600 V CAT IV A193-800 100 mA → 10 kA ac 800 mm 250 mm 1,000V CAT III / 600 V CAT IV

Helagrip PVC Cable Markers On Reels Chevron cut PVC cable markers supplied on reels. The design of the marker allows it to be easily applied over a range of cable sizes. They are manufactured from flexible, high grade PVC which conforms to IEC 684-3. Ideally suited to panel building, mass transit, utilities, telecommunications, and electrical contracting. Features and Benefits • Easily apply one size marker to wide range of cables • Markers are applied pre-termination • Chevron cut to ensure markers lock together • Characters available are 0-9, A-Z, and standard electrical symbols

Quick Change Extension Bars Ideal for both power tool and manual work Enables the user to work in hard to reach areas and access out of reach screws Single handed bit change Magnetic tip