Discounted Products

SENSOR LOGIC NOT SUB-BASE MOUNT

The Broadcom ACNT-H61L is a low-power digital optocoupler device in 15mm wide creepage and 14.2mm clearance that combines a light emitting diode (LED) and an integrated high gain photo detector designed to provide optically isolated interface for system control and data communications interface. The device is extremely low power, consuming up to 2 mA of supply current across wide temperature range. The LED forward current operates from 4.5 mA. Low power supply current (IDD): 2 mA max Low input current capability: 4.5 mA min 20 kV/μs min common mode rejection (CMR) at VCM = 1,000 V High speed interface: 10 MBd min Guaranteed AC and DC performance over wide temperature: -40 °C to +105 °C 15mm Stretched SO8 package Internal clearance: 0.5 mm

AC Over-Door Heaters (Warm Air Curtains) Designed for localised heating around open doors Can be used as a high level fan heater Adjustable airflow direction Full heat, half heat and fan-only settings Designed for single doors Optimum mounting height 1.8 to 2.3 m

The e2s A105NSONTEL Telephone initiated alarm sounder is a compact, high output, 105dB(A) has a choice of three alarm tone frequencies. Automatic synchronisation Continuously rated Dual M20 x 1.5 mm threaded cable entries Duplicate pluggable cable terminations Class A Ingress protection IP66 Type 4/4X/13/3R 64 alarm tone frequencies and 4 remotely activated alarm stages Available with custom tone configurations and frequencies Diode polarized for use in supervised circuit

HP Plastic P clips Manufactured from Polyamide, these P clips offer good temperature resistance and are very strong. The clips are able to secure cables of various sizes by offering a range of fixing holes — this feature means users do not have to stock a large range of clips.,For permanent or semi-permanent cable fixings. Their light weight makes them particularly suitable for use in the aerospace industry where minimising weight while retaining secure fixing is vitally important.

Cat 6 Patch Panels UTP and STP patch panels to Category 6 Horizontal PCB 110 punchdown terminations Individual cable strain reliefs with rear wire management Clear panel markings, can be wired to 568A or 568B Depth behind panel 135mm, Height 1U

The Iko Nippon Thompson 8x17x20mm precision linear slide unit. It is small and simple limited stroke type structure and retainer with two-row four-point contact structure and stable accuracy. In this rigidity can be achieved even in application where fluctuating load and complex load are applied. Simple limited linear motion guide structure Smooth operation High accuracy Stainless steel selection for excellent corrosion resistance

40W 90x90mm Panasonic 3 Series Gearboxes Dimensions Motor Size Motor Power Combination Body Length with 40W motor* Gearbox Shaft Length** Gearbox Shaft Diameter Gearbox Output Shaft Type 90 x 90mm 40W 142mm 27mm 12mm Key *Body length is from front of gearbox to back of the motor. **Shaft length is not including bearing housing dimension. Dimension is 32mm from end of shaft to front face of gearbox. Ratio Gear Output Speed (rpm) with motor speeds between 1225 and 1350rpm Direction of rotation same as motor? Output Torque (Nm) with 40w motor Stock no. 3:1 408.33 - 450 Yes 0.66 423-983 5:1 245 - 270 Yes 1.08 423-989 15:1 81.66 - 90 Yes 3.23 424-134 20:1 61.25 - 67.5 Yes 4.41 424-071 50:1 24.5 - 27 Yes 9.8 424-077 100:1 12.25 - 13.5 No 9.8 424-037 120:1 10.2 - 11.25 No 9.8 423-999 150:1 8.1 - 9 No 9.8 424-116 180:1 6.8 - 7.5 No 9.8 423-995 Note Panasonic 3 Series 40W Gearboxes can only be used with Panasonic 3 Series 40W Motors. Panasonic 3 Series Motors and Gearboxes Panasonic 3 Series Motors, with identical mounting dimensions as the G Series, replace and offer the following benefits over G Series Motors: Grease-lubricated gearboxes 10000hr life Quiet operation Class B motor insulation A number of additional design changes include: A number of gearboxes with shorter gearheads Different motor shafts (non-interchangeable with G Series gearboxes) Note Panasonic 3 Series Motors can only be used with Panasonic 3 Series Gearboxes. Approvals UL, CE and CCC

DIODE GEN PURP 1KV 25A DO203AA

Oval light fitting Oval lamp with wire basket For ceiling and wall mounting Grey plastic base section, clear textured glass cover shell Bulb not included, for compatible bulbs see order no. 604-646 Exterior Amenity Bulkheads

CONN RCPT HSG FMALE 31POS PNL MT

Compact fluorescent tube 18 W with high luminosityDimensions: Width: 345 mmHeight: 95 mmDepth: 55 mm

7A IDEAL DIODE WITH REVERSE INPU

Toggle Switches, Std, PCB Mount, 2A Toggle switches with self-cleaning, wiping silver contacts Two front pins provide additional support. Threaded bushes apart from stock no. 317-695 which has plain bush Connecting pins on a 0.1in pitch grid Silver contacts Chrome plated brass actuator and PBT case Minimum load: 100mA @ 10V Mechanical life: 100000 operations, electrical life: 20000 operations Note For biased switches '(on)' refers to momentary 'on' position Momentary function (spring-loaded return): The switch or contact breaker returns to its original position when the load is removed. E.g. bell push) Stay-put function : The switch or contact breaker remains (stop) in the new position after the load has been removed.

LTC4162 DC2038= LEAD ACID,ADJT,M

The 24 SMA-50-2-14/111NH is a bulkhead solder SMA Straight Jack for use with RG174, RG188A and RG316 RF coaxial cables. It has gold-plated beryllium copper centre contact and a PFA/PTFE insulator. -65 to 165°C Operating temperature Applications RF Communications, Industrial

Panasonic Rechargeable NiMH Batteries Ready to use: you can use them immediately after buying them Stay charged: after 1 year still up to 80% of the capacity remains without charging Combines the convenience of a disposable battery with the performance and cost benefits of a rechargeable battery Offers consumers a convenient battery range to meet all their needs Ideal for the frequent rechargeable battery user

SCREW,SET,SOC,FP

3 Pole Contactors with Screw Clamp or Solder Termination Contactors have a switching voltage of 440Vac and a coil consumption (ac coils 50 / 60Hz rated) of 4.5VA (Hold in) and 30VA (inrush). Utilisation category AC3 DIN rail or screw mounting Ambient air temperature range -25 to +50°C Approvals CSA, UL, NEMKO, DEMKO, SEMKO, FIMKO Standards BS5424 Part 1/IEC 947, VDE 0660, NFC63 110

Low Smoke Halogen Free Single Core Cable - H05Z-K A flexible low smoke halogen free single core cable for internal wiring Intended for installation within conduits and trunking, as well as internal wiring within appliances and fittings Can be used in all areas where in an event of fire a protection of people and equipment is paramount Flame retardant in accordance to IEC 60332-2-2 Smoke density in accordance to IEC 61034 Halogen free in accordance to IEC 60754-1 Working voltage 300/500V Test Voltage 2000Vac Temperature range -15°C → +90°C

FAN AXIAL 92X38MM 115VAC WIRE

SCREW PLUG M40X1,5