Key Operator With Round Bezel
These switch operators are for use with switch bodies (see stock no. 323-561 typically). The legend plates supplied with the switch bodies will only fit the switch operators that have a square escutcheon.
Single hole panel mounting 30.5mm diameter (Round Bezel)
Key operators allow key removal in ALL the latched positions of the switch bodies. 2 keys supplied
Suitable for up to 6mm panel thickness
IP66 protection to front panel
Technical Specification
Series
CA10
CA20
CA25
CAD11
CHR10
CG8
Insulation Voltage U,
690V
690V
690V
600
690
690
Thermal Current l
th
20A
25A
32A
6A
20A
20A
Motor Rating AC-23A
7.5kW
11kW
15kW
-
7.5kW
7.5kW
Motor Rating AC-3
5.5kW
7.5kW
11kW
-
5.5kW
5.5kW
Switching Angle
60°
Dims. (mm)
48 x 48mm
Ambient temp. of stages
55°C during 24 hours with peaks up to 60°C at 100% load
Protection
IP20
Legend Plate
Silver with black text
Standards
IEC
947, EN 60947
CA10, CA20, CA25 & CAD11 Series
Open finger proof terminals accessible from the side to facilitate wiring. Captive plus-minus screws
CHR10 Series
For connection with ring type terminals. Open finger-proof terminals accessible while switch is being installed. Captive plus-minus screws located 90° apart from the terminal direction allowing for connection of wires without any interference with the terminal screws.
CG8 Series
Open finger-proof terminals accessible while the switch is installed. Captive plus-minus screws. Due to the arrangement of the terminals it is possible to install switches closely, side by side or to mount them directly at the cable trays