Rates
1+
£ 94.02
Products Found: 150
Showing Results For: Control Stations
Control Stations
FILTERS
Filters
Showing
1 -
New Items
New items
07-3512-10P74N84, Bartec
Pushbutton & Emergency Stop
Pushbutton is supplied with red, green, yellow and white coloured push-in inserts
Approvals
II 2 G EEx e d IIC T6
Bartec Hazardous Area
Control stations for Zones 1 and 2 made from anti-static and impact-resistant polymer.
Normally closed contacts are positive break
Fitted with two terminals each side of contacts for loop-in applications
Switching capacities: 250V a.c./16A (AC12); 230V a.c./10A (AC15); 24V d.c./1A (DC13) and 110V d.c./0.5A
LED lamps (on stations with indicators) operate from 24 to 48V d.c. or 24 to 230V a.c.
Ingress protection to IP66/67
Reduced side walls to allow easy access to switch and lamp modules
Units can be joined together to form pendants or larger control stations by using a coupler kit
Terminals: 0.5 to 2.5mm
2
conductors
Two earth terminals fitted as standard in each unit
Cable entry M20 x 1.5mm (bottom face)
New items
A22NE-M-P002-N-B, Omron
The Omron A22NE series emergency stop switch integrated with control box. It has turn-reset type actuation method with 40 mm head diameter.
It uses IP65 degree of protection
New items
New items
S2P1001, Lovato
Control Stations
This range of polycarbonate control stations from the Lovato Platinum 22mm series can be mounted in any position.
New items
07-3511-10LRR, Bartec
Single Indicator Lamp
Mulit-voltage LED green or red lamp unit
Approvals
II 2 G EEx e d IIC T6
Bartec Hazardous Area
Control stations for Zones 1 and 2 made from anti-static and impact-resistant polymer.
Normally closed contacts are positive break
Fitted with two terminals each side of contacts for loop-in applications
Switching capacities: 250V a.c./16A (AC12); 230V a.c./10A (AC15); 24V d.c./1A (DC13) and 110V d.c./0.5A
LED lamps (on stations with indicators) operate from 24 to 48V d.c. or 24 to 230V a.c.
Ingress protection to IP66/67
Reduced side walls to allow easy access to switch and lamp modules
Units can be joined together to form pendants or larger control stations by using a coupler kit
Terminals: 0.5 to 2.5mm
2
conductors
Two earth terminals fitted as standard in each unit
Cable entry M20 x 1.5mm (bottom face)
New items
3SU1853-3NB00-1AA1, Siemens
Two Hand Control Station, 22 mm Push Button
Siemens extremely rugged IP69K two-hand metal control station for command devices.
Easy installation
Suitable for use in extreme environments
No special tools required
Simple geometry for mounting holes
Connection to the most commonly used communication systems (PROFINET, AS-Interface, IO-Link)
Standards
IEC 60947-1, EN 60947-1
IEC 60947-5-1, EN 60947-5-1
Siemens Sirius Act Range
The SIRIUS ACT range of push buttons and signalling devices presents an expertly designed selection of push buttons, pilot lights and switches that are intelligent, reliable and physically robust. An innovative snap-on concept makes the task of installing a unit so effortless that it can be done with one hand.
Made with real metals and high-grade plastics, installed with smart functions and interaction abilities, these state-of-the-art push buttons, indicator lights and switches have been extreme element tested to guarantee a long usage life and reliability for all your operations.
One-handed installation without special tools
Components can be snapped on without having to hold the other side
Installation possible in a slanted position
Modular concept
Stylish design & high-quality materials
Extremely Rugged & Reliable
Flexible Communication - AS-I, IO Link and Profinet
New items
07-3512-10LRRLGG, Bartec
Double Indicator Lamp
Green and red multi-voltage LED lamp unit
Approvals
II 2 G EEx e d IIC T6
Bartec Hazardous Area
Control stations for Zones 1 and 2 made from anti-static and impact-resistant polymer.
Normally closed contacts are positive break
Fitted with two terminals each side of contacts for loop-in applications
Switching capacities: 250V a.c./16A (AC12); 230V a.c./10A (AC15); 24V d.c./1A (DC13) and 110V d.c./0.5A
LED lamps (on stations with indicators) operate from 24 to 48V d.c. or 24 to 230V a.c.
Ingress protection to IP66/67
Reduced side walls to allow easy access to switch and lamp modules
Units can be joined together to form pendants or larger control stations by using a coupler kit
Terminals: 0.5 to 2.5mm
2
conductors
Two earth terminals fitted as standard in each unit
Cable entry M20 x 1.5mm (bottom face)
New items
3SU1852-0AB00-2AB1, Siemens
Enclosure for command devices, 22 mm, round, Enclosure material metal, enclosure top part gray, 2 control points metal, B=pushbutton green, label: I, 1 NO, screw terminal, A=pushbutton red, label: O, 1 NC, screw terminal, floor mounting, 1xM20 each on top and bottom
New items
XAPG19201, Schneider Electric
XAP 22 mm Enclosures - Accessories
XAPA glass-reinforced polyester enclosures, XAPG die-cast zinc enclosures, XAPE anodized aluminium flush mount enclosures and XAPZ drilled grounding plates are available with or without 22 mm holes for use with XB4 metal and XB5 plastic operators.
IP65 and IP657
New items
3SU1801-0BE00-4AB1, Siemens
Under the brand name SIRIUS ACT, Siemens offers a unique portfolio of pushbuttons and signaling devices with global product approvals in four modern design lines of rugged genuine metal and high-grade plastic.
An innovative snap-on concept makes the task of installing a unit so easy that it can be done with one hand and without any special tools. Groove-free holes are adequate as mounting holes since full twist prevention is already integrated.
Thanks to the high degree of protection throughout, the rugged devices are suitable for use in industry and outdoors. Even cleaning with a high-pressure jet is possible. Neither dust, oils, nor caustic solutions can interfere with reliable operation.
As well as standard wiring, the devices can also be connected to the controller via PROFINET, AS-Interface or IO-Link. Doing so will help you to reduce wiring time and effort, minimize error sources and have more flexibility.
The graphical Online Configurator provides convenient support when selecting and ordering individual devices, enclosures and labels. Extensive documentation (e.g. manual, 3D data, terminal diagram) is available.
Enclosure for command devices, 22 mm, round, enclosure material plastic, enclosure top part gray, 1 control point, A = selector switch, black, metal 2 switch positions, momentary contact, 1 NO, spring- type terminal, floor mounting, support terminal, without label, 1xM20 each on top and bottom
New items
3SU1802-0AC10-4HB1, Siemens
Under the brand name SIRIUS ACT, Siemens offers a unique portfolio of pushbuttons and signaling devices with global product approvals in four modern design lines of rugged genuine metal and high-grade plastic.
An innovative snap-on concept makes the task of installing a unit so easy that it can be done with one hand and without any special tools. Groove-free holes are adequate as mounting holes since full twist prevention is already integrated.
Thanks to the high degree of protection throughout, the rugged devices are suitable for use in industry and outdoors. Even cleaning with a high-pressure jet is possible. Neither dust, oils, nor caustic solutions can interfere with reliable operation.
As well as standard wiring, the devices can also be connected to the controller via PROFINET, AS-Interface or IO-Link. Doing so will help you to reduce wiring time and effort, minimize error sources and have more flexibility.
The graphical Online Configurator provides convenient support when selecting and ordering individual devices, enclosures and labels. Extensive documentation (e.g. manual, 3D data, terminal diagram) is available.
New items
3SU1853-0AB00-2AB1, Siemens
Under the brand name SIRIUS ACT, Siemens offers a unique portfolio of pushbuttons and signaling devices with global product approvals in four modern design lines of rugged genuine metal and high-grade plastic.
An innovative snap-on concept makes the task of installing a unit so easy that it can be done with one hand and without any special tools. Groove-free holes are adequate as mounting holes since full twist prevention is already integrated.
Thanks to the high degree of protection throughout, the rugged devices are suitable for use in industry and outdoors. Even cleaning with a high-pressure jet is possible. Neither dust, oils, nor caustic solutions can interfere with reliable operation.
As well as standard wiring, the devices can also be connected to the controller via PROFINET, AS-Interface or IO-Link. Doing so will help you to reduce wiring time and effort, minimize error sources and have more flexibility.
The graphical Online Configurator provides convenient support when selecting and ordering individual devices, enclosures and labels. Extensive documentation (e.g. manual, 3D data, terminal diagram) is available.