Bartec Profile
BARTECH is a world-renowned private company founded around 1975 in Germany. The main reason for forming the company was to create tools that could prevent explosions at gas stations (Petrol Stations). Today, the company has many skilled and competent national and international suppliers that are steadily working to provide quality products and to enhance their resources in the field. BARTEC supplies standard-quality products like analyzer systems and analyzers, trace moisture measurements, seismic instruments, contactless temperature measurements, measurements and data acquisition systems for milk, measurements and data acquisition systems for hazardous liquids, gas moisture measurements, control and connection equipment, electrical engineering tools for mining, automation, and enterprise mobility devices, etc. Chemical, gas, and oil industries, pharmaceutical, and petrochemical companies from around the world are among the global commercial group's primary customers.
Featured Products
Pushbutton & Emergency Stop Pushbutton is supplied with red, green, yellow and white coloured push-in inser...
Frost Detection/Protection Sensor Temperature sensor mounted in a black polyester IP66 EExe terminal box su...
Double Indicator Lamp Green and red multi-voltage LED lamp unit Approvals...
Pushbutton Inserts Pack of six pushbutton inserts with the following designations: green - Start, On and I, r...
GRP EExe Junction Boxes Manufactured from flame retardant black antistatic high impact glass-filled polyester...
Single Indicator Lamp Mulit-voltage LED green or red lamp unit Approvals II 2 G EEx...
Bartec Miniature Limit Switch / Insert Switch EExd miniature switches for use in areas where a flameproof s...
Double Indicator Lamp Green and red multi-voltage LED lamp unit Approvals II 2 G EE...
Switch Actuators Level of protection IP66 Impact strength ≥7Nm Enclosure material Thermoplastic Gasket material EPDM Note...
Bartec Miniature Limit Switch / Insert Switch EExd miniature switches for use in areas where a flameproof switching...
2 Position Latching Selector Switch Ideal for switching lighting and control circuits Approvals...
Label Holder For operator inclusive label inserts Hazardous Area Actuators & Contact Blocks Panel mounting, with a wide range of switch conta...
Popular Categories For Bartec
Popular Items
Popular items
07-3512-10P74N84, Bartec
Pushbutton & Emergency Stop
Pushbutton is supplied with red, green, yellow and white coloured push-in inserts
Approvals
II 2 G EEx e d IIC T6
Bartec Hazardous Area
Control stations for Zones 1 and 2 made from anti-static and impact-resistant polymer.
Normally closed contacts are positive break
Fitted with two terminals each side of contacts for loop-in applications
Switching capacities: 250V a.c./16A (AC12); 230V a.c./10A (AC15); 24V d.c./1A (DC13) and 110V d.c./0.5A
LED lamps (on stations with indicators) operate from 24 to 48V d.c. or 24 to 230V a.c.
Ingress protection to IP66/67
Reduced side walls to allow easy access to switch and lamp modules
Units can be joined together to form pendants or larger control stations by using a coupler kit
Terminals: 0.5 to 2.5mm
2
conductors
Two earth terminals fitted as standard in each unit
Cable entry M20 x 1.5mm (bottom face)
Popular items
GB 110 - 3513773, Bartec
Frost Detection/Protection Sensor
Temperature sensor mounted in a black polyester IP66 EExe terminal box suitable for temperature control in Ex installations
Switches "On" at 4°C hysteresis 10°C
Contacts open on temperature rise
Popular items
07-3512-10LGGLRR, Bartec
Double Indicator Lamp
Green and red multi-voltage LED lamp unit
Approvals
II 2 G EEx e d IIC T6
Bartec Hazardous Area
Control stations for Zones 1 and 2 made from anti-static and impact-resistant polymer.
Normally closed contacts are positive break
Fitted with two terminals each side of contacts for loop-in applications
Switching capacities: 250V a.c./16A (AC12); 230V a.c./10A (AC15); 24V d.c./1A (DC13) and 110V d.c./0.5A
LED lamps (on stations with indicators) operate from 24 to 48V d.c. or 24 to 230V a.c.
Ingress protection to IP66/67
Reduced side walls to allow easy access to switch and lamp modules
Units can be joined together to form pendants or larger control stations by using a coupler kit
Terminals: 0.5 to 2.5mm
2
conductors
Two earth terminals fitted as standard in each unit
Cable entry M20 x 1.5mm (bottom face)
Popular items
05-0091-0019, Bartec
Pushbutton Inserts
Pack of six pushbutton inserts with the following designations: green - Start, On and I, red - Stop, Off and O.
Bartec Hazardous Area
Control stations for Zones 1 and 2 made from anti-static and impact-resistant polymer.
Normally closed contacts are positive break
Fitted with two terminals each side of contacts for loop-in applications
Switching capacities: 250V a.c./16A (AC12); 230V a.c./10A (AC15); 24V d.c./1A (DC13) and 110V d.c./0.5A
LED lamps (on stations with indicators) operate from 24 to 48V d.c. or 24 to 230V a.c.
Ingress protection to IP66/67
Reduced side walls to allow easy access to switch and lamp modules
Units can be joined together to form pendants or larger control stations by using a coupler kit
Terminals: 0.5 to 2.5mm
2
conductors
Two earth terminals fitted as standard in each unit
Cable entry M20 x 1.5mm (bottom face)
Popular items
OTB122, Bartec
GRP EExe Junction Boxes Manufactured from flame retardant black antistatic high impact glass-filled polyester materialCaptive lid screwsSilicon O ring lid sealZinc-plated steel earth continuity plate with clearance holes with raised dimples to provide a high pressure electrical contact between cable gland and earth plateContains 5 x AKZ4 terminals and 1 x AKE earth terminal
Popular items
07-3511-10LRR, Bartec
Single Indicator Lamp
Mulit-voltage LED green or red lamp unit
Approvals
II 2 G EEx e d IIC T6
Bartec Hazardous Area
Control stations for Zones 1 and 2 made from anti-static and impact-resistant polymer.
Normally closed contacts are positive break
Fitted with two terminals each side of contacts for loop-in applications
Switching capacities: 250V a.c./16A (AC12); 230V a.c./10A (AC15); 24V d.c./1A (DC13) and 110V d.c./0.5A
LED lamps (on stations with indicators) operate from 24 to 48V d.c. or 24 to 230V a.c.
Ingress protection to IP66/67
Reduced side walls to allow easy access to switch and lamp modules
Units can be joined together to form pendants or larger control stations by using a coupler kit
Terminals: 0.5 to 2.5mm
2
conductors
Two earth terminals fitted as standard in each unit
Cable entry M20 x 1.5mm (bottom face)
Popular items
07-2501-6130/01, Bartec
Bartec Miniature Limit Switch / Insert Switch
EExd miniature switches for use in areas where a flameproof switching element is required. Two types of switches are available to suit different equipment construction requirements, Limit Switches and Insert Switches. The Limit Switch type requires mechanical protection for the switch body and cable, no further testing is required. The Insert Switch is to be installed in a enclosure that provides mechanical protection and which fulfils the requirements of EN 50014 section 1.2 .
IP54 protection rating
Silver changeover contacts
250Vac 5A (resistive), 250Vdc 0.25A (resistive), 30Vdc 5A (resistive)
10
7
operations
Body width 18mm, height 28mm, depth 10mm
Long lever actuator length 65mm, Short lever 14mm
Limit Switch cable length 1m, Insert Switch leads length 500mm
Potted cable / leads to switch base
Popular items
07-3512-10LRRLGG, Bartec
Double Indicator Lamp
Green and red multi-voltage LED lamp unit
Approvals
II 2 G EEx e d IIC T6
Bartec Hazardous Area
Control stations for Zones 1 and 2 made from anti-static and impact-resistant polymer.
Normally closed contacts are positive break
Fitted with two terminals each side of contacts for loop-in applications
Switching capacities: 250V a.c./16A (AC12); 230V a.c./10A (AC15); 24V d.c./1A (DC13) and 110V d.c./0.5A
LED lamps (on stations with indicators) operate from 24 to 48V d.c. or 24 to 230V a.c.
Ingress protection to IP66/67
Reduced side walls to allow easy access to switch and lamp modules
Units can be joined together to form pendants or larger control stations by using a coupler kit
Terminals: 0.5 to 2.5mm
2
conductors
Two earth terminals fitted as standard in each unit
Cable entry M20 x 1.5mm (bottom face)
Popular items
05-0003-001001, Bartec
Switch Actuators
Level of protection
IP66
Impact strength
≥7Nm
Enclosure material
Thermoplastic
Gasket material
EPDM
Note
Selection of coloured discs are included with stock no.
244-3415
; red, yellow, white, green and blue
2443421
is a pull to release latching emergency stop push button
Hazardous Area Actuators & Contact Blocks
Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.
Popular items
07-1501-6530/01, Bartec
Bartec Miniature Limit Switch / Insert Switch
EExd miniature switches for use in areas where a flameproof switching element is required. Two types of switches are available to suit different equipment construction requirements, Limit Switches and Insert Switches. The Limit Switch type requires mechanical protection for the switch body and cable, no further testing is required. The Insert Switch is to be installed in a enclosure that provides mechanical protection and which fulfils the requirements of EN 50014 section 1.2 .
IP54 protection rating
Silver changeover contacts
250Vac 5A (resistive), 250Vdc 0.25A (resistive), 30Vdc 5A (resistive)
10
7
operations
Body width 18mm, height 28mm, depth 10mm
Long lever actuator length 65mm, Short lever 14mm
Limit Switch cable length 1m, Insert Switch leads length 500mm
Potted cable / leads to switch base
Popular items
07-3511-10S92, Bartec
2 Position Latching Selector Switch
Ideal for switching lighting and control circuits
Approvals
II 2 G EEx e d IIC T6
Bartec Hazardous Area
Control stations for Zones 1 and 2 made from anti-static and impact-resistant polymer.
Normally closed contacts are positive break
Fitted with two terminals each side of contacts for loop-in applications
Switching capacities: 250V a.c./16A (AC12); 230V a.c./10A (AC15); 24V d.c./1A (DC13) and 110V d.c./0.5A
LED lamps (on stations with indicators) operate from 24 to 48V d.c. or 24 to 230V a.c.
Ingress protection to IP66/67
Reduced side walls to allow easy access to switch and lamp modules
Units can be joined together to form pendants or larger control stations by using a coupler kit
Terminals: 0.5 to 2.5mm
2
conductors
Two earth terminals fitted as standard in each unit
Cable entry M20 x 1.5mm (bottom face)
Popular items
05-0044-0001, Bartec
Label Holder
For operator inclusive label inserts
Hazardous Area Actuators & Contact Blocks
Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.
New Items
New items
07-3512-10P74N84, Bartec
Pushbutton & Emergency Stop
Pushbutton is supplied with red, green, yellow and white coloured push-in inserts
Approvals
II 2 G EEx e d IIC T6
Bartec Hazardous Area
Control stations for Zones 1 and 2 made from anti-static and impact-resistant polymer.
Normally closed contacts are positive break
Fitted with two terminals each side of contacts for loop-in applications
Switching capacities: 250V a.c./16A (AC12); 230V a.c./10A (AC15); 24V d.c./1A (DC13) and 110V d.c./0.5A
LED lamps (on stations with indicators) operate from 24 to 48V d.c. or 24 to 230V a.c.
Ingress protection to IP66/67
Reduced side walls to allow easy access to switch and lamp modules
Units can be joined together to form pendants or larger control stations by using a coupler kit
Terminals: 0.5 to 2.5mm
2
conductors
Two earth terminals fitted as standard in each unit
Cable entry M20 x 1.5mm (bottom face)
New items
GB 110 - 3513773, Bartec
Frost Detection/Protection Sensor
Temperature sensor mounted in a black polyester IP66 EExe terminal box suitable for temperature control in Ex installations
Switches "On" at 4°C hysteresis 10°C
Contacts open on temperature rise
New items
07-3512-10LGGLRR, Bartec
Double Indicator Lamp
Green and red multi-voltage LED lamp unit
Approvals
II 2 G EEx e d IIC T6
Bartec Hazardous Area
Control stations for Zones 1 and 2 made from anti-static and impact-resistant polymer.
Normally closed contacts are positive break
Fitted with two terminals each side of contacts for loop-in applications
Switching capacities: 250V a.c./16A (AC12); 230V a.c./10A (AC15); 24V d.c./1A (DC13) and 110V d.c./0.5A
LED lamps (on stations with indicators) operate from 24 to 48V d.c. or 24 to 230V a.c.
Ingress protection to IP66/67
Reduced side walls to allow easy access to switch and lamp modules
Units can be joined together to form pendants or larger control stations by using a coupler kit
Terminals: 0.5 to 2.5mm
2
conductors
Two earth terminals fitted as standard in each unit
Cable entry M20 x 1.5mm (bottom face)
New items
05-0091-0019, Bartec
Pushbutton Inserts
Pack of six pushbutton inserts with the following designations: green - Start, On and I, red - Stop, Off and O.
Bartec Hazardous Area
Control stations for Zones 1 and 2 made from anti-static and impact-resistant polymer.
Normally closed contacts are positive break
Fitted with two terminals each side of contacts for loop-in applications
Switching capacities: 250V a.c./16A (AC12); 230V a.c./10A (AC15); 24V d.c./1A (DC13) and 110V d.c./0.5A
LED lamps (on stations with indicators) operate from 24 to 48V d.c. or 24 to 230V a.c.
Ingress protection to IP66/67
Reduced side walls to allow easy access to switch and lamp modules
Units can be joined together to form pendants or larger control stations by using a coupler kit
Terminals: 0.5 to 2.5mm
2
conductors
Two earth terminals fitted as standard in each unit
Cable entry M20 x 1.5mm (bottom face)
New items
OTB122, Bartec
GRP EExe Junction Boxes Manufactured from flame retardant black antistatic high impact glass-filled polyester materialCaptive lid screwsSilicon O ring lid sealZinc-plated steel earth continuity plate with clearance holes with raised dimples to provide a high pressure electrical contact between cable gland and earth plateContains 5 x AKZ4 terminals and 1 x AKE earth terminal
New items
07-3511-10LRR, Bartec
Single Indicator Lamp
Mulit-voltage LED green or red lamp unit
Approvals
II 2 G EEx e d IIC T6
Bartec Hazardous Area
Control stations for Zones 1 and 2 made from anti-static and impact-resistant polymer.
Normally closed contacts are positive break
Fitted with two terminals each side of contacts for loop-in applications
Switching capacities: 250V a.c./16A (AC12); 230V a.c./10A (AC15); 24V d.c./1A (DC13) and 110V d.c./0.5A
LED lamps (on stations with indicators) operate from 24 to 48V d.c. or 24 to 230V a.c.
Ingress protection to IP66/67
Reduced side walls to allow easy access to switch and lamp modules
Units can be joined together to form pendants or larger control stations by using a coupler kit
Terminals: 0.5 to 2.5mm
2
conductors
Two earth terminals fitted as standard in each unit
Cable entry M20 x 1.5mm (bottom face)
New items
07-2501-6130/01, Bartec
Bartec Miniature Limit Switch / Insert Switch
EExd miniature switches for use in areas where a flameproof switching element is required. Two types of switches are available to suit different equipment construction requirements, Limit Switches and Insert Switches. The Limit Switch type requires mechanical protection for the switch body and cable, no further testing is required. The Insert Switch is to be installed in a enclosure that provides mechanical protection and which fulfils the requirements of EN 50014 section 1.2 .
IP54 protection rating
Silver changeover contacts
250Vac 5A (resistive), 250Vdc 0.25A (resistive), 30Vdc 5A (resistive)
10
7
operations
Body width 18mm, height 28mm, depth 10mm
Long lever actuator length 65mm, Short lever 14mm
Limit Switch cable length 1m, Insert Switch leads length 500mm
Potted cable / leads to switch base
New items
07-3512-10LRRLGG, Bartec
Double Indicator Lamp
Green and red multi-voltage LED lamp unit
Approvals
II 2 G EEx e d IIC T6
Bartec Hazardous Area
Control stations for Zones 1 and 2 made from anti-static and impact-resistant polymer.
Normally closed contacts are positive break
Fitted with two terminals each side of contacts for loop-in applications
Switching capacities: 250V a.c./16A (AC12); 230V a.c./10A (AC15); 24V d.c./1A (DC13) and 110V d.c./0.5A
LED lamps (on stations with indicators) operate from 24 to 48V d.c. or 24 to 230V a.c.
Ingress protection to IP66/67
Reduced side walls to allow easy access to switch and lamp modules
Units can be joined together to form pendants or larger control stations by using a coupler kit
Terminals: 0.5 to 2.5mm
2
conductors
Two earth terminals fitted as standard in each unit
Cable entry M20 x 1.5mm (bottom face)
New items
05-0003-001001, Bartec
Switch Actuators
Level of protection
IP66
Impact strength
≥7Nm
Enclosure material
Thermoplastic
Gasket material
EPDM
Note
Selection of coloured discs are included with stock no.
244-3415
; red, yellow, white, green and blue
2443421
is a pull to release latching emergency stop push button
Hazardous Area Actuators & Contact Blocks
Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.
New items
07-1501-6530/01, Bartec
Bartec Miniature Limit Switch / Insert Switch
EExd miniature switches for use in areas where a flameproof switching element is required. Two types of switches are available to suit different equipment construction requirements, Limit Switches and Insert Switches. The Limit Switch type requires mechanical protection for the switch body and cable, no further testing is required. The Insert Switch is to be installed in a enclosure that provides mechanical protection and which fulfils the requirements of EN 50014 section 1.2 .
IP54 protection rating
Silver changeover contacts
250Vac 5A (resistive), 250Vdc 0.25A (resistive), 30Vdc 5A (resistive)
10
7
operations
Body width 18mm, height 28mm, depth 10mm
Long lever actuator length 65mm, Short lever 14mm
Limit Switch cable length 1m, Insert Switch leads length 500mm
Potted cable / leads to switch base
New items
07-3511-10S92, Bartec
2 Position Latching Selector Switch
Ideal for switching lighting and control circuits
Approvals
II 2 G EEx e d IIC T6
Bartec Hazardous Area
Control stations for Zones 1 and 2 made from anti-static and impact-resistant polymer.
Normally closed contacts are positive break
Fitted with two terminals each side of contacts for loop-in applications
Switching capacities: 250V a.c./16A (AC12); 230V a.c./10A (AC15); 24V d.c./1A (DC13) and 110V d.c./0.5A
LED lamps (on stations with indicators) operate from 24 to 48V d.c. or 24 to 230V a.c.
Ingress protection to IP66/67
Reduced side walls to allow easy access to switch and lamp modules
Units can be joined together to form pendants or larger control stations by using a coupler kit
Terminals: 0.5 to 2.5mm
2
conductors
Two earth terminals fitted as standard in each unit
Cable entry M20 x 1.5mm (bottom face)
New items
05-0044-0001, Bartec
Label Holder
For operator inclusive label inserts
Hazardous Area Actuators & Contact Blocks
Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.
Don’t hesitate to ask questions for better clarification.