Fire Alarm Kits

The Aico switched input module has been designed to triggers the alarms in a system if an external device is activated, such as a sprinkler system. Connects with the alarm system using RadioLINK wireless interconnection technology Connects wirelessly with all other Aico wireless interconnection products

The Aico SmartLINK module allows for wireless interconnection and data extraction. Simply plug in to any 3000 series alarm and is compatible with other Aico wireless interconnection products. Remote alarm learn entry Transmits, receives and repeats RF specific data RF mesh architecture Unique house coding feature

Gemini Standalone Fire Alarm The battery-powered Gemini GX20e is a manual, high-powered fire alarm with piezo-electric sounder suitable for small buildings. Up to four units may be linked together. Integral call point, battery and sounder Battery fault monitor Keyswitch to silence and restart alarm Twin LED fire indication LED fault indication Simple to install Robust steel construction Stand Alone Fire Alarms Battery Operated A comprehensive range of battery operated smoke alarms all carrying the BS Kitemark and compliance with BS5446:Pt1:1990. They are suitable for BS5839:Pt6:1995 Fire Systems grade F. Mains Powered Interconnectable All new properties are required by the Building Regulations to have installed mains powered smoke alarms. Refurbished properties and small commercial premises may also be required to install mains operated alarms. BS5839:Pt.6:1995 acknowledges that all three types of detection i.e. ionisation, optical and heat detection, need to be considered depending on the installation circumstances. It is also recommended that some form of back-up is used in the event of mains failure. Optical alarms are recommended for use in circulation spaces such as landings and hallways. Ionisation alarms are more appropriate for use in living rooms and fixed temperature heat alarms are designed for use in kitchens and garages. All alarms must be interconnected using 3 core and earth cable. At least one alarm on each floor of the house Max. 7.5m between alarms and no more than 3m from bedroom doors Alarms can be wired off lighting circuits if the alarm has its own backup supply Locate as close as possible to centre of ceiling, away from light fitting Alarms must be kept clean at all times and particularly whilst building work or decoration is in progress Mains Operated Suitable for new buildings to allow conformity to building regulations. Each unit features an 85dB at 3m internal alarm and interconection facility which allow the sensing unit to...

The Aico RadioLINK alarm controller is used to control all the alarms in a system from one place. It contains LED’s which clearly display which danger has activated the alarm – helping to you take the appropriate action as quickly as possible. Battery powered by a sealed in Lithium cell 10 year life Completely wire free installation Connects wirelessly with all other Aico wireless interconnection products

GX32 Fire Alarm System The GX32 fire alarm system is the most advanced of its type available. It uses PIC microprocessor technology in both the control panel and in each call point. The GX32 is designed in such a way that even if the cables are cut or short circuited in several places the system will continue to function. Each call point is individually battery powered and contains its own high power piezo sounder. A unique trace mode enables cable faults and battery problems to be pinpointed at the throw of a key. Installation Considerations. BS5839 recommends that manual call points should be located on exit routes and in particular on floor landings of stairways and at exits to the open air. They should be so located that, to give an alarm, no person in the premises need travel more than 30 metres. BS5839 recommends a minimum sound level of either 65db(A) or 5db(A) above any other noise likely to persist for longer than 30 seconds should be produced by the sounders in all accessible parts of the building. GX32 system sounders give a sound level of at least 100db(A) at 1 metre to ensure that almost 70db(A) is available at 30m distance to meet the above dual recommendations. GEMINI fire alarms are the ideal choice for fire alarms in small buildings and temporary accommodation etc... Up to 32 Callpoint/Sounder units can be connected to the control Integral Call Point, Battery and Sounder Battery Fault Monitor Keyswitch to Silence & Restart Alarm Twin LED Fire Indication LED Fault Indication Simple to install System Healthy LED Smoke Alarm Option Robust Construction Fault Trace Facility Two wire connection Supplied with 1 x GX32CIE Control Panel 4 x GX32MCP Manual Callpoint/Sounder units 140m Twin red inter-connecting cable. Stand Alone Fire Alarms Battery Operated A comprehensive range of battery operated smoke alarms all carrying the BS Kitemark and compliance with BS5446:Pt1:1990. They are suitable for BS5839:Pt6:1995 Fire Systems grade F. Mains...

The Aico mains powered with rechargeable battery back up, alarm kit is for the deaf and hard of hearing. The kit contains a Xenon strobe light that provide and plug in vibrating pillow pad that will activate when the interconnected alarms are triggered to alert the user to the danger. Flashing strobe light Vibrating pillow pad Mains powered with rechargeable lead acid back-up battery Wireless interconnect