LVDS Serialisers

Ideal for High-Definition Video Applications Drives Low-Cost 50Ω Coax Cable and FAKRA Connectors or 100Ω STP 104MHz High-Bandwidth Mode Supports 1920x720p/60Hz Display With 24-Bit Color Serializer Pre/Deemphasis Allows 15m Cable at Full Speed Up to 192kHz Sample Rate and 32-Bit Sample Depth For 7.1 Channel HD Audio Multiple Data Rates for System Flexibility Up to 3.12Gbps Serial-Bit Rate 6.25MHz to 104MHz Pixel Clock 9.6kbps to 1Mbps Control Channel in UART, Mixed UART/I2C, or I2C Mode with Clock Stretch Capability Reduces EMI and Shielding Requirements Serial Output Programmable for 100mV to 500mV Single-Ended or 100mV to 400mV Differential Programmable Spread Spectrum Reduces EMI Bypassable Input PLL for Pixel Clock Jitter Attenuation Tracks Spread Spectrum on Input High-Immunity Mode for Maximum Control-Channel Noise Rejection Peripheral Features for System Power-Up and Verification Built-In PRBS Generator for BER Testing of the Serial Link Programmable Choice of 9 Default Device Addresses Dedicated “Up/Down” GPO for Touch-Screen Interrupt and Other Uses Remote/Local Wake-Up from Sleep Mode Meets Rigorous Automotive and Industrial Requirements -40°C to +105°C Operating Temperature 8kV Contact and 15kV Air ESD Protection Applications High-Resolution Automotive Navigation Megapixel Camera Systems Rear-Seat Infotainment

LVDS Line Drivers, Maxim Integrated LVDS Communication Low Voltage Differential Signaling, or LVDS, is an electrical signaling system that can run at very high speeds over cheap, twisted-pair copper cables. Applications: Firewire, SATA, SCSI

Ideal for High-Definition Video Applications Drives Low-Cost 50Ω Coax Cable and FAKRA Connectors or 100Ω STP 104MHz High-Bandwidth Mode Supports 1920x720p/60Hz Display With 24-Bit Color Serializer Pre/Deemphasis Allows 15m Cable at Full Speed Up to 192kHz Sample Rate And 32-Bit Sample Depth For 7.1 Channel HD Audio Multiple Data Rates for System Flexibility Up to 3.12Gbps Serial-Bit Rate 6.25MHz to 104MHz Pixel Clock 9.6kbps to 1Mbps Control Channel in UART, Mixed UART/I2C, or I2C Mode with Clock Stretch Capability Reduces EMI and Shielding Requirements Serial Output Programmable for 100mV to 500mv Single-Ended or 100mV to 400mV Differential Programmable Spread Spectrum Reduces EMI Bypassable Input PLL for Parallel Clock Jitter Attenuation Tracks Spread Spectrum on Input High-Immunity Mode for Maximum Control-Channel Noise Rejection Peripheral Features for System Power-Up and Verification Built-In PRBS Generator for BER Testing of the Serial Link Dedicated “Up/Down” GPO for Touch-Screen Interrupt and Other Uses Remote/Local Wake-Up from Sleep Mode Meets Rigorous Automotive and Industrial Requirements -40°C to +105°C Operating Temperature ±8kV Contact and ±15kV Air ESD Protection Applications High-Resolution Automotive Navigation Megapixel Camera Systems Rear-Seat Infotainment

The MAX9278A/MAX9282A gigabit multimedia serial link (GMSL) deserializers receive data from a GMSL serializer over 50Ω coax or 100Ω shielded twisted-pair (STP) cable and output deserialized data on 3 of 4 data-lane LVDS outputs (oLDI). The MAX9282A has HDCP content protection but otherwise is the same as the MAX9278A. The deserializers pair with any GMSL serializer capable of coax output. When programmed for STP input, they are backward compatible with any GMSL serializer. The audio channel supports L-PCM I2S stereo and up to eight channels of L-PCM in TDM mode. Sample rates of 32kHz to 192kHz are supported with sample depth up to 32 bits. Ideal for High-Definition Video Applications Multiple Data Rates for System Flexibility Reduces EMI and Shielding Requirements Built-In PRBS Tester for BER Testing of the Serial Link Two Dedicated GPIO Ports Dedicated “Up/Down” GPI for Touch-Screen Interruptr

LVDS Line Drivers, Maxim Integrated LVDS Communication Low Voltage Differential Signaling, or LVDS, is an electrical signaling system that can run at very high speeds over cheap, twisted-pair copper cables. Applications: Firewire, SATA, SCSI