Products Found: 13
Showing Results For: Motor Control Development Kits
Motor Control Development Kits
FILTERS
Filters
Enrgtech #
Manufacturer Part No
Name
Availability
Price
Rating
STMicroelectronics
STEVAL-IPMnM1N, STMicroelectronics
Pre Order
Check Stock & Lead Times Packaging Options
1 +
£ 46.75
Seeed Studio
103030029, Seeed Studio
2 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 17.66
5 +
£ 17.20
10 +
£ 16.73
STMicroelectronics
STEVAL-IPMnM2N, STMicroelectronics
Pre Order
Check Stock & Lead Times Packaging Options
1 +
£ 46.75
Seeed Studio
316010005, Seeed Studio
26 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 6.00
5 +
£ 5.53
10 +
£ 5.35
Intelligent Embedded Solutions
IES-SHIELD-SCX18, Intelligent Embedded Solutions
Pre Order
Check Stock & Lead Times Packaging Options
GertBoard
Gertbot, GertBoard
Pre Order
Check Stock & Lead Times Packaging Options
Infineon
KITXMC44AE3001TOBO1, Infineon
Pre Order
Check Stock & Lead Times Packaging Options
1 +
£ 271.83
5 +
£ 265.04
Pimoroni
PIM214, Pimoroni
Pre Order
Check Stock & Lead Times Packaging Options
1 +
£ 9.69
Seeed Studio
105030006, Seeed Studio
35 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 13.94
5 +
£ 13.75
10 +
£ 13.48
Infineon
DEMO300WMCSUPERSO8TOBO1, Infineon
Pre Order
Check Stock & Lead Times Packaging Options
Intelligent Embedded Solutions
IES-SHIELD-STX4, Intelligent Embedded Solutions
Pre Order
Check Stock & Lead Times Packaging Options
1 +
£ 42.44
5 +
£ 41.60
Microchip
DV330021, Microchip
Pre Order
Check Stock & Lead Times Packaging Options
1 +
£ 192.03
Renesas Electronics
YROTATE-IT-RX111, Renesas Electronics
Pre Order
Check Stock & Lead Times Packaging Options
1 +
£ 199.10
3 +
£ 175.55
5 +
£ 152.14
Showing
1 -
New Items
New items
IES-SHIELD-SCX18, Intelligent Embedded Solutions
Servomotor Controller Plug-in Module (Shield) for Arduino
This 18-channel R/C servomotor driver shield is designed for the Arduino UNO microcontroller board but is compatible with all other Arduino boards and the Raspberry Pi via the high speed I²C interface. Typical applications include humanoid and multi-limbed 'walking' format robots.
Standard Arduino UNO Shield form factor
256 steps of angular shaft position
16-level speed control for each servo
Movement complete and soft-start complete status for each servomotor
Global activation control ensures all servos react together
Standard R/C servomotor connection headers
Communication via 400kHz serial I²C bus
Jumper-selectable I²C address
Jumper-selectable I²C pull-ups (Not required for Raspberry Pi)
Two +5V @ 3A regulators with heatsinks for motor power supply
Up to four shields can be linked together via the I²C bus controlling up to 72 servomotors
Screw connector for motor power supply
Operating temperature range: 0 to +70°C
Dimensions: 56.25 x 53.5 x 15mm
Compatible Servomotors
781-3058
Standard 180° Servomotor
781-3046
Standard Continuous-Rotation Servomotor, 50rpm
790-5220
Standard Continuous-Rotation Servomotor, 180rpm
Intelligent Embedded Solutions
New items
New items
YROTATE-IT-RX111, Renesas Electronics
Motor Control Kit for RX111 Microcontrollers
The
Rotate IT Motor Control Kit
is for use with the RX111 Microcontroller (MCU). It will work on 3V running at 32MHz. The RX111 is capable of controlling a three phase permanent magnet motor. The embedded software and PC GUI auto-tune PI current coefficient alongside automatic motor parameters identification. The efficiency of the Inverter can be increased via the PC GUI by modifying the current loop and PWM frequencies.
Medium system response of the vector controlled algorithm
The Field Oriented Algorithm controls the motor speed, torque in a sensor less technique (any load conditions)
New items
New items
IES-SHIELD-STX4, Intelligent Embedded Solutions
Stepper-Motor Controller Plug-in Module (Shield) for Arduino
This 4-channel stepper-motor driver shield is designed for the Arduino UNO microcontroller board but is compatible with all other Arduino boards and the Raspberry Pi via the high speed I2C interface. Typical applications include humanoid and small, wheeled rover format robots.
Standard Arduino UNO Shield form factor
Each motor can be stepped in either direction a set number of steps at a set speed
Each motor can be continuously stepped at a set speed
Each motor can be stopped with holding torque or completely off
Selectable 1 or 2 phase excitation
8-bit set speed resolution
Up to 65535 set number of steps
4 shields can be linked together via I2C to control up to 16 motors
Supports all 5 to 12V unipolar (5/6-wire) stepper motors with a minimum winding resistance of 20Ω (250mA)
Communication via 400kHz serial I2C bus
Jumper-selectable I2C address
Jumper-selectable I2C pull-ups (Not required for Raspberry Pi)
Jumper-selectable motor power supply: +6V to +12V or +5V regulated
+5V,3A regulator with heatsink for motor and USB-A power supply
Up to four shields can be linked together via the I2C bus controlling up to 16 stepper-motors
Screw connector for power supply input
Power supply input: +6V to +12Vdc
USB socket provides power to an external circuit, e.g. a Raspberry PI SBC
Operating temperature range: 0 to +70°C
Dimensions: 56.25 x 53.5 x 15mm
Note
A suitable general purpose stepper motor is available under RS Part No.
368-0277
New items
New items
Gertbot, GertBoard
Gertbot Motor Control Board for Raspberry Pi
The Gertbot is an
add-on board
made especially for, and compatible with all versions of the Raspberry Pi. By plugging the Gertbot to your Pi GPIO header, you are able to control and drive various motors such as stepper and brushed motors. The Gertbot can also be used as a standalone board and can be controlled from any computer via a UART serial port.
Features & Benefits of the Gertbot
64 MHz ARM Cortex-M3 processor
Can drive 30 V and 2.5 A
Easy to set up
High-level commands make it easy to control
Capacity to plug in up to 4 more boards
Outputs are short circuit and thermal protected
The board can be controlled without programming
New items
New items
DEMO300WMCSUPERSO8TOBO1, Infineon
300W BLDC Motor Control Application Kit
This 300W Motor Control Evaluation Board from Infineon demonstrates an efficient solution for low power motor control applications. The board includes an XC836M2FRI 8-bit microcontroller, 6ED003L02-F2 MOSFET Gate Driver together with BSC016N06NS High efficiency SSO8 MOSFETs and is designed to control BLDC motors of up to 300 W. Typical applications include power tools and electric bikes.
Easy plug-and-play GUI for fast set-up and testing of the board
B6 inverter topology with high 10-24kHz switching frequency
Voltage, Current (Torque) and Speed control possible
Suitable for BLDC motors with hall sensors
Input voltage: 18-24V DC, 20A continuous current at 18 V
Motor Controllers & Drivers, Infineon
New items
DV330021, Microchip
dsPICDEM MCSM Development Board and Kit
Controls both unipolar and bipolar stepper motors in open-loop or close-loop (current control) mode
No hardware changes are necessary for 8-, 6- or 4-wire stepper motors in either bipolar or unipolar configurations
Software to run motors in open-loop or closed-loop with full or variable micro-stepping
GUI for controlling step commands, motor parameter input, and operation modes
Mounting option to connect either a 28-pin SOIC device or a generic 100-pin Plug-In Module (PIM)
Supplied with Development Board DV330022
(
704-3219
):
dsPICDEM MCSM Development Board
dsPIC33FJ43MC204 Digital Signal Controller (DSC) Plug-In-Module (MA330017)
USB-to-mini-USB cable, Screwdriver
dsPICDEM MCSM Development Board CD ROM, including MCSM Users Guide, data sheets, application note with software and MPLAB DMCI/RTDM GUI for Stepper Motor Control
The Development Kit DV330021
(
704-3212
) includes:
24V Power Supply (P/N: AC002013)
Lead Shine Stepper Motor (P/N: AC300024)
dsPIC® Development Tools
New items
KITXMC44AE3001TOBO1, Infineon
Motor Control Application Kit for XMC4400
The XMC4400 Motor Control application kit from Infineon has everything needed to realize a plug-and-play solution for 3-phase drives. The kit includes an XMC4400 Microcontroller Board, a 24V Power Board with MOSFET power transistors, and a brushless DC motor. The application is supported by Infineons DAVE™ Motor Control Apps library, including sinusoidal and block commutation as well as various position detection and sensing schemes with encoder, resolver, hall sensors and shunts. The DAVE™ free development platform for code generation can be downloaded from the Infineon website.
New items
STEVAL-IPMnM1N, STMicroelectronics
The STEVAL-IPMnM1N is a compact motor drive power board based on SLLIMM™-nano (small low-loss intelligent molded module) 2nd series MOSFET-based product (STIPN1M50T-H) . It provides an affordable and easy-to-use solution for driving high power motors in a wide range of applications such as power white goods, air conditioning, compressors, power fans and 3-phase inverters for motor drives in general. The IPM itself consists of short-circuit rugged MOSFETs and a wide range of features like undervoltage lockout, smart shutdown, internal temperature sensor and NTC, overcurrent protection and internal op-amp.
Single- or three-shunt resistors for current sensing (with sensing network)
Three options for current sensing: dedicated external op-amps, internal SLLIMM-nano op-amp (single) or via MCU
Overcurrent hardware protection
IPM temperature monitoring and protection
Hall sensor or encoder input
IGBT intelligent power module