Digital Pressure Meter Accessories

Dwyer Instruments Manometer Accessories Dwyer Instruments accessories range for suit the 400 series digital manometers. Dwyer Instruments Manometers

Gas U-Tube Meters Accessories Connection hose, silicone, 5m long - max load 700hPa (mbar) Pressure connection hose, single, Ø:4/6 mm, 50 cm, long, without connection adaptor Pressure set with flue draught probe, includes 2 silicone hoses, each with Ø 4 mm and 6 mmmm, 4mm and 6 mm T-piece, connection part Pitot tube, 350 mm long, stainless steel, measures velocity, speed Testo digital pressure gauge accessories testo Electronic Manifolds The testo 550 series electronic manifolds with up to a 3-way valve bank are the ideal tools for regulating refrigerating systems. They are high quantity sensors for measuring pressure, vacuum and temperature. Display condensation and vaporisation temperatures - the measured pressure on the suction and pressure side is shown on the display. The calculation and display of the respective condensation and evaporation temperatures for the selected refrigerant take place at the same time Valve bank for temporary alteration to flow passages 35 refrigerants stored, selectable via memory Display of cooling/heating output figures for comparison process - Carnot and Lorenz Internal memory Brass finish Display of saturated steam valves Protection to IP65 Common Specifications Accuracy 0.5% FS ±1 digit Op/Storage Temp -20 to +60°C Battery 9V PP3 (supplied) Battery life Approx. 40 hours Compensation -10 to +50°C Dimensions (L x W x H) 175 x 109 x 34mm (wt.1250g)

Accessories Digilink interface. Provides interface between logging instruments and a serial printer or PC DigiLog Windows based software . Graphical analysis software featuring zoom, chart wizards for chart customisation, highlighting and text entry. Separate logging sessions can be merged into one graph or report Rubber Holster fits 2000 series thermometers and pressure meters for example 311-1658 2006T Digitron 2000P Series - Manometers Hand-held manometers series. Features found in the range include: Robust design. IP67 with hose connected, operates between -10 and +50°C, backlit 12.7mm display, reinforced silicone key pad and separate battery compartment Accuracy: 0.15% rdg + 0.1fs +digit (+20 to +30°C); 0.15% rdg + 0.15% fs digit (elsewhere) Connection: 2 inputs via 1/8 BSP (4mm id, 6mm od hose) Zeroing absolute user input of local barometric conditions for additional accuracy Preset engineering units - mbar, Pa, inH ² O, mH ² O, inHg, mHg, kPa, PSI Min/Max & Average recording, range lock & selectable auto off Smoothing. Filters low level fluctuations to provide a stable display when measuring unsteady pressure levels Automatic leak testing. Instrument measures pressure leakage from a system over a user specified test duration time. At the end of the test time a Pass/Fail message is displayed and logged to memory Long battery life. Typically 200 hours (requires 2 x AA batteries, stock no 591-225 ) Dimensions: 155 x 67 x 40mm, weight 180g All instruments are supplied with instruction manual. Model 202xP and 208xP additional features : 7 pre-set engineering units Range lock, Min / Max recorder Smoothing Model 208xP additional features: Automatic leak testing 250 memory logging on demand or at preset intervals Min/Max and averaging recorder 4 digit reference coding of logged data Cal function zero Infra red serial interface to c...