Rates
Products Found: 24
Showing Results For: Hydraulic Solenoid Actuated Directional Control Valves - CETOP Mounting
Hydraulic Solenoid Actuated Directional Control Valves - CETOP Mounting
FILTERS
Filters
Showing
1 -
New Items
New items
D1VW030HNJW, Parker
CETOP 03 Directional Control Valves
A range of CETOP 3 hydraulic directional control valves from Parker Hannifin with double solenoid or single solenoid with spring return actuation. D1W valves have been designed with excellent fluid flow, low-pressure drop and low energy usage and a flow rate of up to 80 ml/min.
Features and Benefits
Mountable in any position (Horizontal preferred)
Available as double solenoid or single solenoid with spring return
Flow rate of up to 80 ml/min and a low, energy saving pressure drop
3 position and 2 position spools available with a wide selection of spool types
Manual solenoid override
Suitable for use with hydraulic oils conforming to DIN 51524
DIN NG06 / CETOP 03 / NFPA D03
Max wire length 50 m.
15000/h Max switching frequency
Max leakage @ 50 bar 10 ml/min (spool dependant)
Wet pin armature solenoid threaded in tube
3x1.5mm² wire recommended for installation
EN 175301-803 Solenoid connection (plug not included)
Applications
Suitable for general industrial hydraulic applications.
Directional Control Valves – Solenoid Actuated
A range of CETOP standard valves used to control the starting, stopping and direction of a flow of hydraulic fluid. All valves work with mineral oils (HL, HLP) to DIN51 524 with a working fluid temperature range of -30°C to +80°C. Some valves are available with a detent feature which holds the valve in the selected control position.
Must be fitted using CETOP subplate mountings (see r...
New items
New items
D3W020BNYW, Parker
CETOP 05 Directional Control Valves
A range of CETOP 5 hydraulic directional control valves from Parker Hannifin with double solenoid or single solenoid with spring return actuation. D3W valves have been designed with excellent fluid flow, low-pressure drop and low energy usage and a flow rate of up to 150 ml/min.
Features and Benefits
Mountable in any position (Horizontal preferred)
Available as double solenoid or single solenoid with spring return
Flow rate of up to 150 ml/min and a low, energy saving pressure drop
3 position and 2 position spools available with a wide selection of spool types
Manual solenoid override
Suitable for use with hydraulic oils conforming to DIN 51524
DIN NG10 / CETOP 05 / NFPA D05
Max wire length 50 m.
10000/h Max switching frequency
Max leakage @ 50 bar 20 ml/min (spool dependant)
Wet pin armature solenoid threaded in tube
3x1.5mm² wire recommended for installation
EN 175301-803 Solenoid connection (plug not included)
Applications
Suitable for general industrial hydraulic applications.
Directional Control Valves – Solenoid Actuated
A range of CETOP standard valves used to control the starting, stopping and direction of a flow of hydraulic fluid. All valves work with mineral oils (HL, HLP) to DIN51 524 with a working fluid temperature range of -30°C to +80°C. Some valves are available with a detent feature which holds the valve in the selected control position.
Must be fitted using CETOP subplate mountings (see ...
New items
D3W020HNKW, Parker
CETOP 05 Directional Control Valves
A range of CETOP 5 hydraulic directional control valves from Parker Hannifin with double solenoid or single solenoid with spring return actuation. D3W valves have been designed with excellent fluid flow, low-pressure drop and low energy usage and a flow rate of up to 150 ml/min.
Features and Benefits
Mountable in any position (Horizontal preferred)
Available as double solenoid or single solenoid with spring return
Flow rate of up to 150 ml/min and a low, energy saving pressure drop
3 position and 2 position spools available with a wide selection of spool types
Manual solenoid override
Suitable for use with hydraulic oils conforming to DIN 51524
DIN NG10 / CETOP 05 / NFPA D05
Max wire length 50 m.
10000/h Max switching frequency
Max leakage @ 50 bar 20 ml/min (spool dependant)
Wet pin armature solenoid threaded in tube
3x1.5mm² wire recommended for installation
EN 175301-803 Solenoid connection (plug not included)
Applications
Suitable for general industrial hydraulic applications.
Directional Control Valves – Solenoid Actuated
A range of CETOP standard valves used to control the starting, stopping and direction of a flow of hydraulic fluid. All valves work with mineral oils (HL, HLP) to DIN51 524 with a working fluid temperature range of -30°C to +80°C. Some valves are available with a detent feature which hol...
New items
D3W002CNYW, Parker
CETOP 05 Directional Control Valves
A range of CETOP 5 hydraulic directional control valves from Parker Hannifin with double solenoid or single solenoid with spring return actuation. D3W valves have been designed with excellent fluid flow, low-pressure drop and low energy usage and a flow rate of up to 150 ml/min.
Features and Benefits
Mountable in any position (Horizontal preferred)
Available as double solenoid or single solenoid with spring return
Flow rate of up to 150 ml/min and a low, energy saving pressure drop
3 position and 2 position spools available with a wide selection of spool types
Manual solenoid override
Suitable for use with hydraulic oils conforming to DIN 51524
DIN NG10 / CETOP 05 / NFPA D05
Max wire length 50 m.
10000/h Max switching frequency
Max leakage @ 50 bar 20 ml/min (spool dependant)
Wet pin armature solenoid threaded in tube
3x1.5mm² wire recommended for installation
EN 175301-803 Solenoid connection (plug not included)
Applications
Suitable for general industrial hydraulic applications.
Directional Control Valves – Solenoid Actuated
A range of CETOP standard valves used to control the starting, stopping and direction of a flow of hydraulic fluid. All valves work with mineral oils (HL, HLP) to DIN51 524 with a working fluid temperature range of -30°C to +80°C. Some valves are available with a detent feature which holds the valve in the selected control position.
Must be fitted using CETOP subplate mountings (see ...
New items
D1VW030BNJW, Parker
CETOP 03 Directional Control Valves
A range of CETOP 3 hydraulic directional control valves from Parker Hannifin with double solenoid or single solenoid with spring return actuation. D1W valves have been designed with excellent fluid flow, low-pressure drop and low energy usage and a flow rate of up to 80 ml/min.
Features and Benefits
Mountable in any position (Horizontal preferred)
Available as double solenoid or single solenoid with spring return
Flow rate of up to 80 ml/min and a low, energy saving pressure drop
3 position and 2 position spools available with a wide selection of spool types
Manual solenoid override
Suitable for use with hydraulic oils conforming to DIN 51524
DIN NG06 / CETOP 03 / NFPA D03
Max wire length 50 m.
15000/h Max switching frequency
Max leakage @ 50 bar 10 ml/min (spool dependant)
Wet pin armature solenoid threaded in tube
3x1.5mm² wire recommended for installation
EN 175301-803 Solenoid connection (plug not included)
Applications
Suitable for general industrial hydraulic applications.
Directional Control Valves – Solenoid Actuated
A range of CETOP standard valves used to control the starting, stopping and direction of a flow of hydraulic fluid. All valves work with mineral oils (HL, HLP) to DIN51 524 with a working fluid temperature range of -30°C to +80°C. Some valves are available with a detent feature which holds the valve in the selected control position.
Must be fitted using CETOP subplate mountings (see r...
New items
D1VW002CNKW, Parker
CETOP 03 Directional Control Valves
A range of CETOP 3 hydraulic directional control valves from Parker Hannifin with double solenoid or single solenoid with spring return actuation. D1W valves have been designed with excellent fluid flow, low-pressure drop and low energy usage and a flow rate of up to 80 ml/min.
Features and Benefits
Mountable in any position (Horizontal preferred)
Available as double solenoid or single solenoid with spring return
Flow rate of up to 80 ml/min and a low, energy saving pressure drop
3 position and 2 position spools available with a wide selection of spool types
Manual solenoid override
Suitable for use with hydraulic oils conforming to DIN 51524
DIN NG06 / CETOP 03 / NFPA D03
Max wire length 50 m.
15000/h Max switching frequency
Max leakage @ 50 bar 10 ml/min (spool dependant)
Wet pin armature solenoid threaded in tube
3x1.5mm² wire recommended for installation
EN 175301-803 Solenoid connection (plug not included)
Applications
Suitable for general industrial hydraulic applications.
Directional Control Valves – Solenoid Actuated
A range of CETOP standard valves used to control the starting, stopping and direction of a flow of hydraulic fluid. All valves work with mineral oils (HL, HLP) to DIN51 524 with a working fluid temperature range of -30°C to +80°C. Some valves are available with a detent feature which holds the valve in the selected control position.
Must be fitted using CETOP subplate mountings (see r...
New items
D1VW020HNKW, Parker
CETOP 03 Directional Control Valves
A range of CETOP 3 hydraulic directional control valves from Parker Hannifin with double solenoid or single solenoid with spring return actuation. D1W valves have been designed with excellent fluid flow, low-pressure drop and low energy usage and a flow rate of up to 80 ml/min.
Features and Benefits
Mountable in any position (Horizontal preferred)
Available as double solenoid or single solenoid with spring return
Flow rate of up to 80 ml/min and a low, energy saving pressure drop
3 position and 2 position spools available with a wide selection of spool types
Manual solenoid override
Suitable for use with hydraulic oils conforming to DIN 51524
DIN NG06 / CETOP 03 / NFPA D03
Max wire length 50 m.
15000/h Max switching frequency
Max leakage @ 50 bar 10 ml/min (spool dependant)
Wet pin armature solenoid threaded in tube
3x1.5mm² wire recommended for installation
EN 175301-803 Solenoid connection (plug not included)
Applications
Suitable for general industrial hydraulic applications.
Directional Control Valves – Solenoid Actuated
A range of CETOP standard valves used to control the starting, stopping and direction of a flow of hydraulic fluid. All valves work with mineral oils (HL, HLP) to DIN51 524 with a working fluid temperature range of -30°C to +80°C. Some valves are available with a detent feature which holds the valve in the selected control position.
Must be fitted using CETOP subplate mountings (see r...
New items
D1VW002CNYW, Parker
CETOP 03 Directional Control Valves
A range of CETOP 3 hydraulic directional control valves from Parker Hannifin with double solenoid or single solenoid with spring return actuation. D1W valves have been designed with excellent fluid flow, low-pressure drop and low energy usage and a flow rate of up to 80 ml/min.
Features and Benefits
Mountable in any position (Horizontal preferred)
Available as double solenoid or single solenoid with spring return
Flow rate of up to 80 ml/min and a low, energy saving pressure drop
3 position and 2 position spools available with a wide selection of spool types
Manual solenoid override
Suitable for use with hydraulic oils conforming to DIN 51524
DIN NG06 / CETOP 03 / NFPA D03
Max wire length 50 m.
15000/h Max switching frequency
Max leakage @ 50 bar 10 ml/min (spool dependant)
Wet pin armature solenoid threaded in tube
3x1.5mm² wire recommended for installation
EN 175301-803 Solenoid connection (plug not included)
Applications
Suitable for general industrial hydraulic applications.
Directional Control Valves – Solenoid Actuated
A range of CETOP standard valves used to control the starting, stopping and direction of a flow of hydraulic fluid. All valves work with mineral oils (HL, HLP) to DIN51 524 with a working fluid temperature range of -30°C to +80°C. Some valves are available with a detent feature which holds the valve in the selected control position.
Must be fitted using CETOP subplate mountings (see r...
New items
D3W020BNKW, Parker
CETOP 05 Directional Control Valves
A range of CETOP 5 hydraulic directional control valves from Parker Hannifin with double solenoid or single solenoid with spring return actuation. D3W valves have been designed with excellent fluid flow, low-pressure drop and low energy usage and a flow rate of up to 150 ml/min.
Features and Benefits
Mountable in any position (Horizontal preferred)
Available as double solenoid or single solenoid with spring return
Flow rate of up to 150 ml/min and a low, energy saving pressure drop
3 position and 2 position spools available with a wide selection of spool types
Manual solenoid override
Suitable for use with hydraulic oils conforming to DIN 51524
DIN NG10 / CETOP 05 / NFPA D05
Max wire length 50 m.
10000/h Max switching frequency
Max leakage @ 50 bar 20 ml/min (spool dependant)
Wet pin armature solenoid threaded in tube
3x1.5mm² wire recommended for installation
EN 175301-803 Solenoid connection (plug not included)
Applications
Suitable for general industrial hydraulic applications.
Directional Control Valves – Solenoid Actuated
A range of CETOP standard valves used to control the starting, stopping and direction of a flow of hydraulic fluid. All valves work with mineral oils (HL, HLP) to DIN51 524 with a working fluid temperature range of -30°C to +80°C. Some valves are available with a detent feature which holds the valve in the selected control position.
Must be fitted using CETOP subplate mountings (see ...
New items
D3W004CNYW, Parker
CETOP 05 Directional Control Valves
A range of CETOP 5 hydraulic directional control valves from Parker Hannifin with double solenoid or single solenoid with spring return actuation. D3W valves have been designed with excellent fluid flow, low-pressure drop and low energy usage and a flow rate of up to 150 ml/min.
Features and Benefits
Mountable in any position (Horizontal preferred)
Available as double solenoid or single solenoid with spring return
Flow rate of up to 150 ml/min and a low, energy saving pressure drop
3 position and 2 position spools available with a wide selection of spool types
Manual solenoid override
Suitable for use with hydraulic oils conforming to DIN 51524
DIN NG10 / CETOP 05 / NFPA D05
Max wire length 50 m.
10000/h Max switching frequency
Max leakage @ 50 bar 20 ml/min (spool dependant)
Wet pin armature solenoid threaded in tube
3x1.5mm² wire recommended for installation
EN 175301-803 Solenoid connection (plug not included)
Applications
Suitable for general industrial hydraulic applications.
Directional Control Valves – Solenoid Actuated
A range of CETOP standard valves used to control the starting, stopping and direction of a flow of hydraulic fluid. All valves work with mineral oils (HL, HLP) to DIN51 524 with a working fluid temperature range of -30°C to +80°C. Some valves are available with a detent feature which holds the valve in the selected control position.
Must be fitted using CETOP subplate mountings (see ...
New items
D3W001CNYW, Parker
CETOP 05 Directional Control Valves
A range of CETOP 5 hydraulic directional control valves from Parker Hannifin with double solenoid or single solenoid with spring return actuation. D3W valves have been designed with excellent fluid flow, low-pressure drop and low energy usage and a flow rate of up to 150 ml/min.
Features and Benefits
Mountable in any position (Horizontal preferred)
Available as double solenoid or single solenoid with spring return
Flow rate of up to 150 ml/min and a low, energy saving pressure drop
3 position and 2 position spools available with a wide selection of spool types
Manual solenoid override
Suitable for use with hydraulic oils conforming to DIN 51524
DIN NG10 / CETOP 05 / NFPA D05
Max wire length 50 m.
10000/h Max switching frequency
Max leakage @ 50 bar 20 ml/min (spool dependant)
Wet pin armature solenoid threaded in tube
3x1.5mm² wire recommended for installation
EN 175301-803 Solenoid connection (plug not included)
Applications
Suitable for general industrial hydraulic applications.
Directional Control Valves – Solenoid Actuated
A range of CETOP standard valves used to control the starting, stopping and direction of a flow of hydraulic fluid. All valves work with mineral oils (HL, HLP) to DIN51 524 with a working fluid temperature range of -30°C to +80°C. Some valves are available with a detent feature which holds the valve in the selected control position.
Must be fitted using CETOP subplate mountings (see ...