Rates
1+
£ 12.11
Products Found: 337
Showing Results For: Pneumatic Sensor & Switch Accessories
Pneumatic Sensor & Switch Accessories
FILTERS
Filters
Showing
1 -
New Items
New items
0860000000000000, IMI Norgren
The IMI Norgren 51D Mountings. Port size is G1/8. Switching status indicated by LED, versions with analogue output signal on request.
High accuracy and resolution
Switching status indicated by LED
Versions with analogue output signal on request
New items
P494A0029400A00, EMERSON – ASCO
Fitting kits
Fitting kit for magnetic sensors. Sensors can be mounted for intermediate position detection.
New items
BMF 305-HW-17, BALLUFF
Starter solenoid switch BMF 305K
Electronic switch
Bounce-free switching, no multiple switch points
M8 and M12 plug connectors
Automotive approved
Protection class IP67
Operating voltage 10 → 30 Vdc
3-cable, PNP, NO
Solenoid switch for pneumatic cylinders. "One for all": These sensors let you identify the piston position of pneumatic cylinders through the cylinder wall. Wear and contact-free. Holding brackets / slot nuts available for all commonly available cylinders. Reduced storage - only 1 sensor for different cylinders.
Balluff part no.
Cable
Plug connector
BMF 305K-PS-C-2-S49-00, 2
0.2 m PUR
M8
BMF 305K-PS-C-2-S4-00, 5
0.5 m PUR
M12
Balluff order ref.
Piston Ø of cylinder
Hose clamp size
BMF hose clamp size 1
8 → 16
1
BMF hose clamp size 2
20, 25
2
BMF hose clamp size 3
32
3
Usability
Holding bracket / slot nut for adapting the BMF 305 to different cylinders (see accompanying drawings)
BMF 305-HW-20
For T-slot cylinders as per drawing. Even when you replace the sensor, the switch is captively fixed with the holding bracket
BMF 305-HW-17
For T-slot cylinders, e.g. Festo, SMC, installed from above. Even when you replace the sensor, the switch is captively fixed with the holding bracket.
BMF 305-HW-23
For T-slot cylinders as per drawing. Installed from above. Even when you replace the sensor, the switch is captively fixed with the holding bracket.
BMF 305-HW-26
For SMC T-slot A or T-slot B cylinders. Holding bracket for slot A installed from above. Even when you replace the sensor, the switch is captively fixed with the holding bracket.
BMF 305-HW-24
Terminal part for round cylinders with piston diameter of 8 → 80 mm, not including slot. A hose clamp the size of the cylinder is also required for mounting (see table). Even when you replace the sensor, the switch is captively fixed.
New items
QM/33/P32/22, IMI Norgren
The IMI Norgren Reed switch bracket is suitable for all cylinder ranges with magnetic pison.
Connector type plug in
New items
BMF 305-HW-20, BALLUFF
Starter solenoid switch BMF 305K
Electronic switch
Bounce-free switching, no multiple switch points
M8 and M12 plug connectors
Automotive approved
Protection class IP67
Operating voltage 10 → 30 Vdc
3-cable, PNP, NO
Solenoid switch for pneumatic cylinders. "One for all": These sensors let you identify the piston position of pneumatic cylinders through the cylinder wall. Wear and contact-free. Holding brackets / slot nuts available for all commonly available cylinders. Reduced storage - only 1 sensor for different cylinders.
Balluff part no.
Cable
Plug connector
BMF 305K-PS-C-2-S49-00, 2
0.2 m PUR
M8
BMF 305K-PS-C-2-S4-00, 5
0.5 m PUR
M12
Balluff order ref.
Piston Ø of cylinder
Hose clamp size
BMF hose clamp size 1
8 → 16
1
BMF hose clamp size 2
20, 25
2
BMF hose clamp size 3
32
3
Usability
Holding bracket / slot nut for adapting the BMF 305 to different cylinders (see accompanying drawings)
BMF 305-HW-20
For T-slot cylinders as per drawing. Even when you replace the sensor, the switch is captively fixed with the holding bracket
BMF 305-HW-17
For T-slot cylinders, e.g. Festo, SMC, installed from above. Even when you replace the sensor, the switch is captively fixed with the holding bracket.
BMF 305-HW-23
For T-slot cylinders as per drawing. Installed from above. Even when you replace the sensor, the switch is captively fixed with the holding bracket.
BMF 305-HW-26
For SMC T-slot A or T-slot B cylinders. Holding bracket for slot A installed from above. Even when you replace the sensor, the switch is captively fixed with the holding bracket.
BMF 305-HW-24
Terminal part for round cylinders with piston diameter of 8 → 80 mm, not including slot. A hose clamp the size of the cylinder is also required for mounting (see table). Even when you replace the sensor, the switch is captively fixed.
New items
P211080-1, SMC
Autoswitch
Vane Types 10-80mm Diameter
A range of compact, lightweight rotary actuators, ideal for turning small loads in confined spaces.
New items
SY100-30-4A-10, SMC
SY100 Series
SY100 Series 3-port solenoid valves offer low power consumption with a long life cycle. This series of valves are compact in design offering the user flexibility while maintaining a high flow rate. SY100 solenoid valves can be used within a vacuum environment. They are also available in body ported or base mounted manifold base.
Features and Benefits
High flow rate
Rubber seals
Copper free
Connector Lead
The connector assembly SY100-68-A-30 from SMC has a protective cover for protection from dust and other foreign matter which helps to reduce short circuit accidents. The outside cover is made from chloroprene rubber aiding with insulation and weather proofing.
SMC SY Series
New items
SY100-68-A-6, SMC
SY100 Series
SY100 Series 3-port solenoid valves offer low power consumption with a long life cycle. This series of valves are compact in design offering the user flexibility while maintaining a high flow rate. SY100 solenoid valves can be used within a vacuum environment. They are also available in body ported or base mounted manifold base.
Features and Benefits
High flow rate
Rubber seals
Copper free
Connector Lead
The connector assembly SY100-68-A-30 from SMC has a protective cover for protection from dust and other foreign matter which helps to reduce short circuit accidents. The outside cover is made from chloroprene rubber aiding with insulation and weather proofing.
SMC SY Series
New items
GERMF-06, Igus
Clevis Joint and Clip
Igumid G clevis joint complete with spring clip
No corrosion and totally maintenance-free
May be combined with Igubal E Series rod ends
Low weight
Ideal for use with pneumatic cylinders and linkages
Rod End & Spherical - Maintenance Free IGUS®
IGUBAL® spherical bearings are self-lubricating, designed to run dry and are maintenance free
The bearings are extremely tolerant to dirt and dust - IGUBAL® can be used in abrasive environments
8 to 20mm bore size
Low weight (20% of equivalent steel)
High rigidity
Corrosion and chemically resistant
High fatigue strength under changing loads
Working temperature range: -30°C to +80°C
New items
New items
1834484168, EMERSON – AVENTICS
4-6mm, LS04 Valve Series
The LS04 series of small and extra small valves, being extremely light and fast acting, is ideally suited to applications where close connection on moving parts, such as pick and place systems, is required.
Compact size
High flow to size ratio
Fast acting
Built in push-in fittings
LED status display
Polyamide body material with polyurethane seal
New items
SY100-30-4A, SMC
SY Z Series Cassette Valves
Compact, lightweight body ported design
Easily configured and expandable valve system
Valves supplied complete with sealing discs
High flow, fast response
Standard, DIN rail mounting
24Vdc solenoid voltage
Low power consumption
Note
'L' type connector must be ordered separately
SMC SY Z Series
A range of modular DIN rail mounted solenoid operated valves and accessories for pneumatic circuits. All valves operate using compressed filtered air (lubricated or non-lubricated) and have an operating temperature range of -10 to +50°C.