Featured Products
Two Way, N/C Steam Valves Two-way, pilot operated solenoid valves for hot water/steam applications, normally c...
202 series direct operated 2 / 2 solenoid valves POSIFLOW direct operated proportional solenoid valves. 2 / 2 N/C solenoid valves, 1/4" output. V...
651/652 Series Regulator A high flow regulator from ASCOs 651/652 series or air preparation equipment. Threaded ports allow this pneumatic regul...
Assisted control 2//2 solenoid valves Range of 2//2 NC solenoid valves with power assistance, non supported diaphragm. Solenoid valve operation w...
519-520-521 series mini valves, assembly only or on manifold 3/2, 5/2 or 5/3 mini distributors for fitting onto manifolds or alone. Stock numbers...
519-520-521 series mini valves, assembly only or on manifold 3/2, 5/2 or 5/3 mini distributors for fitting onto manifolds or alone. Stock numbers...
519-520-521 series mini valves, assembly only or on manifold 3/2, 5/2 or 5/3 mini distributors for fitting onto manifolds or alone. Stock numbers...
Sockets and accessories for series 519-520-521 valves Sockets: Light alloy sockets for 519, 520, 521 series distributors. Connection to extremiti...
238 series 2//2 solenoid valves with power-assisted control. Power-assisted control 2/2 NC and NO solenoid valves with floating diaphragm. No min...
238 series 2//2 solenoid valves with power-assisted control. Power-assisted control 2/2 NC and NO solenoid valves with floating diaphragm. No min...
238 series 2//2 solenoid valves with power-assisted control. Power-assisted control 2/2 NC and NO solenoid valves with floating diaphragm. No min...
Two Way, Direct Operated, Liquid CO2 Valves These valves are two-way, direct operated solenoid valves for liquid CO2. Suitable for high pressure...
Popular Categories For EMERSON – ASCO
Categories For EMERSON – ASCO
Popular Items
Popular items
SCE222B004.110/50, EMERSON – ASCO
Two Way, N/C Steam Valves Two-way, pilot operated solenoid valves for hot water/steam applications, normally closed with threaded port connection. Brass bodyCompact design to minimize heat radiation lossDIN plug connectionRanging from -20 to +184CCan be mounted in any position Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.
Popular items
SC G202A001 V -24VCC, EMERSON – ASCO
202 series direct operated 2 / 2 solenoid valves
POSIFLOW direct operated proportional solenoid valves.
2 / 2 N/C solenoid valves, 1/4" output.
Variable flow, proportional to the control signal.
Do not require a minimum operating pressure.
Can be mounted in any position.
2 mounting holes in body.
Plug connector (Ø 6 → 10 mm cable).
Allowable fluids: air, inert gas, water, oil.
Popular items
35500088, EMERSON – ASCO
ISO 5599 manifolds
Range of bases for ISO distributors, sizes 1, 2 and 3.
Popular items
SCG238A050-230V 50HZ, EMERSON – ASCO
238 series 2/2 power-assisted solenoid valves
Two way solenoid valves for controlling hot and cold water.
No minimum operating pressure (floating diaphragm).
Solenoid valves designed to eliminate water hammer when water is turned off.
Self-cleaning device integrated into the diaphragm aperture for optimum performance.
Popular items
E290D0110SFB000, EMERSON – ASCO
The Asco 290 series 290 pressure-operated, direct acting angle-body piston solenoid valve built for demanding applications. It's straight-through body design is available in bronze or stainless steel. The valve is suitable for general service applications (air, inert gas, water, oil, and light slurries), plus steam, hot water, and auxiliary fluids within the food and beverage industry.
Suitable for a broad range of industrial machines and manufacturing process
High reliability, long service life and exceptional and repeatable tight shutoff
Adjustable actuator enables 360° access to pilot port
Modular design provides exceptional flexibility
Large piloting orifice and low hysteresis creates fast cycle times
Anti-water hammer design and back pressure resistant
Extensive range of actuators, options, certifications and accessories
High performance, maintenance-free actuator and stuffing box
Easy and fast maintenance without the need to remove valve body from pipework
Popular items
E290D0450DA0000, EMERSON – ASCO
The Asco 290 series 290 pressure-operated, direct acting angle-body piston solenoid valve built for demanding applications. It's straight-through body design is available in bronze or stainless steel. The valve is suitable for general service applications (air, inert gas, water, oil, and light slurries), plus steam, hot water, and auxiliary fluids within the food and beverage industry.
Suitable for broad range of industrial machines and manufacturing process
High reliability, long service life and exceptional and repeatable tight shutoff
Adjustable actuator enables 360° access to pilot port
Modular design provides exceptional flexibility
Large piloting orifice and low hysteresis creates fast cycle times
Anti-water hammer design and back pressure resistant
Extensive range of actuators, options, certifications and accessories
High performance, maintenance-free actuator and stuffing box
Easy and fast maintenance without the need to remove valve body from pipework
Popular items
26490026, EMERSON – ASCO
The Asco solenoid valve
can be mounted individually or joined together by using diabolos with sunken locking screws. The operating pressure of 2 to 10 bar.
Fluid Air or neutral gaz, filtered, lubrificated or not
Body Zinc diecast
Poppet Aluminium
Seals NBR (nitrile)
Popular items
30211178--P.24/DC, EMERSON – ASCO
The Asco mini solenoid valve operates at ambient temperature of - 10°C to + 40°C. Operating pressure of this valve is 3 to 8 bar.
Fluid Air or neutral gas filtered, lubricated or not
Flow (Qv at 6.3 bar) 154 l/min( ANR) - Kv 2.2
Differential pressure 0 - 8 bar [1 bar = 100 kPa]
Popular items
SCG356B004VMS.AC/DC, EMERSON – ASCO
The Asco solenoid valve
can measure wide range of flow and pressure ratings. It has quick disassembly of core tube for easy maintenance of internal parts.
Standard manual operator allows an easy installation (1/8 version only)
AC/DC interchangeability of the solenoid without disassembly of the valve (1/8 version only)
UL429 and EN 60335 certified
Compact and low weight valve
Popular items
SCG551A018MS.AC/DC, EMERSON – ASCO
The Asco spool valve
offers environmental protection against the ingress of liquids, dusts or any other foreign matter. It has 5/2 and 5/3 threaded port connections.
Epoxy moulded coil for general service applications
The solenoid valves satisfy all relevant EU Directives
Differential pressure 2 - 10,4 bar [1 bar =100 kPa]
Popular items
L131V08-Z130A G3/4X18 24/50, EMERSON – ASCO
The Asco solenoid valve has 24 V with 50 Hz operating frequency and G 3/4 inch port size, FPM seal material.
18 mm orifice
FPM body material
Popular items
L145R2-Z614A G1/2x10 V24/50Hz, EMERSON – ASCO
The Asco solenoid valve has 24 V with 50 Hz operating frequency and G 1/2 inch pipe size, 2/2 NC function also has PTFE seal material.
10 mm orifice
Brass body material
New Items
New items
SCE222B004.110/50, EMERSON – ASCO
Two Way, N/C Steam Valves Two-way, pilot operated solenoid valves for hot water/steam applications, normally closed with threaded port connection. Brass bodyCompact design to minimize heat radiation lossDIN plug connectionRanging from -20 to +184CCan be mounted in any position Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.
New items
SC G202A001 V -24VCC, EMERSON – ASCO
202 series direct operated 2 / 2 solenoid valves
POSIFLOW direct operated proportional solenoid valves.
2 / 2 N/C solenoid valves, 1/4" output.
Variable flow, proportional to the control signal.
Do not require a minimum operating pressure.
Can be mounted in any position.
2 mounting holes in body.
Plug connector (Ø 6 → 10 mm cable).
Allowable fluids: air, inert gas, water, oil.
New items
35500088, EMERSON – ASCO
ISO 5599 manifolds
Range of bases for ISO distributors, sizes 1, 2 and 3.
New items
SCG238A050-230V 50HZ, EMERSON – ASCO
238 series 2/2 power-assisted solenoid valves
Two way solenoid valves for controlling hot and cold water.
No minimum operating pressure (floating diaphragm).
Solenoid valves designed to eliminate water hammer when water is turned off.
Self-cleaning device integrated into the diaphragm aperture for optimum performance.
New items
E290D0110SFB000, EMERSON – ASCO
The Asco 290 series 290 pressure-operated, direct acting angle-body piston solenoid valve built for demanding applications. It's straight-through body design is available in bronze or stainless steel. The valve is suitable for general service applications (air, inert gas, water, oil, and light slurries), plus steam, hot water, and auxiliary fluids within the food and beverage industry.
Suitable for a broad range of industrial machines and manufacturing process
High reliability, long service life and exceptional and repeatable tight shutoff
Adjustable actuator enables 360° access to pilot port
Modular design provides exceptional flexibility
Large piloting orifice and low hysteresis creates fast cycle times
Anti-water hammer design and back pressure resistant
Extensive range of actuators, options, certifications and accessories
High performance, maintenance-free actuator and stuffing box
Easy and fast maintenance without the need to remove valve body from pipework
New items
E290D0450DA0000, EMERSON – ASCO
The Asco 290 series 290 pressure-operated, direct acting angle-body piston solenoid valve built for demanding applications. It's straight-through body design is available in bronze or stainless steel. The valve is suitable for general service applications (air, inert gas, water, oil, and light slurries), plus steam, hot water, and auxiliary fluids within the food and beverage industry.
Suitable for broad range of industrial machines and manufacturing process
High reliability, long service life and exceptional and repeatable tight shutoff
Adjustable actuator enables 360° access to pilot port
Modular design provides exceptional flexibility
Large piloting orifice and low hysteresis creates fast cycle times
Anti-water hammer design and back pressure resistant
Extensive range of actuators, options, certifications and accessories
High performance, maintenance-free actuator and stuffing box
Easy and fast maintenance without the need to remove valve body from pipework
New items
26490026, EMERSON – ASCO
The Asco solenoid valve
can be mounted individually or joined together by using diabolos with sunken locking screws. The operating pressure of 2 to 10 bar.
Fluid Air or neutral gaz, filtered, lubrificated or not
Body Zinc diecast
Poppet Aluminium
Seals NBR (nitrile)
New items
30211178--P.24/DC, EMERSON – ASCO
The Asco mini solenoid valve operates at ambient temperature of - 10°C to + 40°C. Operating pressure of this valve is 3 to 8 bar.
Fluid Air or neutral gas filtered, lubricated or not
Flow (Qv at 6.3 bar) 154 l/min( ANR) - Kv 2.2
Differential pressure 0 - 8 bar [1 bar = 100 kPa]
New items
SCG356B004VMS.AC/DC, EMERSON – ASCO
The Asco solenoid valve
can measure wide range of flow and pressure ratings. It has quick disassembly of core tube for easy maintenance of internal parts.
Standard manual operator allows an easy installation (1/8 version only)
AC/DC interchangeability of the solenoid without disassembly of the valve (1/8 version only)
UL429 and EN 60335 certified
Compact and low weight valve
New items
SCG551A018MS.AC/DC, EMERSON – ASCO
The Asco spool valve
offers environmental protection against the ingress of liquids, dusts or any other foreign matter. It has 5/2 and 5/3 threaded port connections.
Epoxy moulded coil for general service applications
The solenoid valves satisfy all relevant EU Directives
Differential pressure 2 - 10,4 bar [1 bar =100 kPa]
New items
L131V08-Z130A G3/4X18 24/50, EMERSON – ASCO
The Asco solenoid valve has 24 V with 50 Hz operating frequency and G 3/4 inch port size, FPM seal material.
18 mm orifice
FPM body material
New items
L145R2-Z614A G1/2x10 V24/50Hz, EMERSON – ASCO
The Asco solenoid valve has 24 V with 50 Hz operating frequency and G 1/2 inch pipe size, 2/2 NC function also has PTFE seal material.
10 mm orifice
Brass body material
Don’t hesitate to ask questions for better clarification.