What are the shipping charges for products like Replacement Pneumatic & Vacuum Filter Elements?

Yes. We keep updating our stock frequently and if a product like Replacement Pneumatic & Vacuum Filter Elements is not in stock then we will let you know.

How do I contact the Customer Support Team?

Yes. We keep updating our stock frequently and if a product like Replacement Pneumatic & Vacuum Filter Elements is not in stock then we will let you know.

Where are your products like Replacement Pneumatic & Vacuum Filter Elements manufactured?

Yes. We keep updating our stock frequently and if a product like Replacement Pneumatic & Vacuum Filter Elements is not in stock then we will let you know.

Do you offer any discounts on bulk orders of products like Replacement Pneumatic & Vacuum Filter Elements?

Yes. We keep updating our stock frequently and if a product like Replacement Pneumatic & Vacuum Filter Elements is not in stock then we will let you know.

How long will it take to receive the order that I placed for Replacement Pneumatic & Vacuum Filter Elements?

Yes. We keep updating our stock frequently and if a product like Replacement Pneumatic & Vacuum Filter Elements is not in stock then we will let you know.

Are your products Replacement Pneumatic & Vacuum Filter Elements in stock?

Yes. We keep updating our stock frequently and if a product like Replacement Pneumatic & Vacuum Filter Elements is not in stock then we will let you know.

Replacement Pneumatic | Vacuum Filter Elements | Vacuum Filter

New items

AME-EL350, SMC

SMC Micro Mist and Super Mist Elements A selection of replacements elements from the SMC, suitable for use with AM, AMD, AME and the AMF separator series. Filters, Lubricators and Separators High flow capacity filters, lubricators and separators with polycarbonate bowls. All have an ambient and media temperature range of 5 - 60°C and a proof pressure of 15 bar.

Product Detail

New items

030AA, Domnick Hunter

Oil-X Evolution Series Filters - General Purpose Grade AO & High Efficiency Grade AA Meets and exceeds requirements for compressed air quality Improved air flow management for low energy consumption. Oil vapour removal Drainage ribs and no wet band formation Improved element replacement Fully corrosion protected Incident monitor (available separately) to indicate premature high differential pressure. It can be retrofitted to existing housings without depressurising the system. Fixing clamps (available separately) allow the joining of two filters and act as wall mounting brackets Technical Specification - Filter units Max. Operating Pressure 16 bar (232 psi) Max. Operating Temperature 80°C (176°F) Min. Operating Temperature 1.5°C (35°F) Technical Specification - Element Grade AO High efficiency general purpose protection, particle removal down to 1 micron, including water and oil aerosols. Maximum remaining oil aerosol content: 0.6mg/m3 at 21°C (0.5 ppm(w) at 70°F) Technical Specification - AA Grade Elements For high efficiency oil removal/filtration prcede with AO grade filter Particle removal down to 0.01 microns, including water and oil aerosols Maximum remaining oil aerosol content: 0.01mg/m 3 or 0.01 ppm(w) at 21°C Standards ISO 8573.1 Supplied with AO or AA grade Filter as appropriate Key Characteristics QUALITY DIRT WATER OIL CLASS Particle size Pressure Dewpoint °C (Including vapour) in μm (ppm. vol) at 7 bar g (100 psi g) mg/m 3 1 0.1 -70 (0.3) 0.01 2 1 -40 (16) 0.1 3 5 -20 (128) 1.0 4 15 +3 (940) 5 5 40 +7 (1240) 25 6 - +10 (1500) -

Product Detail

New items

EP020-010N, SMC

Product Detail

New items

I-63S-A, SMC

Vacuum Filter - Inline Type The ZFC series from SMC are air suction filters which prevent trouble due to dust from the vacuum pad. Light weight, compact and easily to replace without tools. Compact, lightweight, inline design Integral one touch push-in fittings Manufacturers part nos ending with B are supplied complete with surface mounting bracket Dimensions (mm) Tube Ø A B C D Weight 4mm 18.5 53.2 23 29 16g 6mm 22.5 67 27 35 20g 8mm 22.5 67 27 35 20g

Product Detail

New items

ZX1-FE, SMC

ZH Series Vacuum Ejector This vacuum ejector is compact and lightweight Made from a composite resin construction The body ported style is provided with mounting holes for securing the body Built-in suction filter and silencer Air supply valve for generating a vacuum

Product Detail

New items

AO020CBFX, Domnick Hunter

Oil-X Evolution Series Filters - General Purpose Grade AO & High Efficiency Grade AA Meets and exceeds requirements for compressed air quality Improved air flow management for low energy consumption. Oil vapour removal Drainage ribs and no wet band formation Improved element replacement Fully corrosion protected Incident monitor (available separately) to indicate premature high differential pressure. It can be retrofitted to existing housings without depressurising the system. Fixing clamps (available separately) allow the joining of two filters and act as wall mounting brackets Technical Specification - Filter units Max. Operating Pressure 16 bar (232 psi) Max. Operating Temperature 80°C (176°F) Min. Operating Temperature 1.5°C (35°F) Technical Specification - Element Grade AO High efficiency general purpose protection, particle removal down to 1 micron, including water and oil aerosols. Maximum remaining oil aerosol content: 0.6mg/m3 at 21°C (0.5 ppm(w) at 70°F) Technical Specification - AA Grade Elements For high efficiency oil removal/filtration prcede with AO grade filter Particle removal down to 0.01 microns, including water and oil aerosols Maximum remaining oil aerosol content: 0.01mg/m 3 or 0.01 ppm(w) at 21°C Standards ISO 8573.1 Supplied with AO or AA grade Filter as appropriate Key Characteristics QUALITY DIRT WATER OIL CLASS Particle size Pressure Dewpoint °C (Including vapour) in μm (ppm. vol) at 7 bar g (100 psi g) mg/m 3 1 0.1 -70 (0.3) 0.01 2 1 -40 (16) 0.1 3 5 -20 (128) 1.0 4 15 +3 (940) 5 5 40 +7 (1240) 25 6 - +10 (1500) -

Product Detail

New items

AM-EL550, SMC

SMC Micro Mist and Super Mist Elements A selection of replacements elements from the SMC, suitable for use with AM, AMD, AME and the AMF separator series. Filters, Lubricators and Separators High flow capacity filters, lubricators and separators with polycarbonate bowls. All have an ambient and media temperature range of 5 - 60°C and a proof pressure of 15 bar.

Product Detail

New items

AFF-EL11B, SMC

Modular Filter 5μm filter Maximum operating pressure of 9.9 bar Auto-drain types require 100l/min flow and 1 bar pressure minimum Filters, Lubricators and Separators High flow capacity filters, lubricators and separators with polycarbonate bowls. All have an ambient and media temperature range of 5 - 60°C and a proof pressure of 15 bar.

Product Detail

New items

015AO, Domnick Hunter

Oil-X Evolution Series Filters - General Purpose Grade AO & High Efficiency Grade AA Meets and exceeds requirements for compressed air quality Improved air flow management for low energy consumption. Oil vapour removal Drainage ribs and no wet band formation Improved element replacement Fully corrosion protected Incident monitor (available separately) to indicate premature high differential pressure. It can be retrofitted to existing housings without depressurising the system. Fixing clamps (available separately) allow the joining of two filters and act as wall mounting brackets Technical Specification - Filter units Max. Operating Pressure 16 bar (232 psi) Max. Operating Temperature 80°C (176°F) Min. Operating Temperature 1.5°C (35°F) Technical Specification - Element Grade AO High efficiency general purpose protection, particle removal down to 1 micron, including water and oil aerosols. Maximum remaining oil aerosol content: 0.6mg/m3 at 21°C (0.5 ppm(w) at 70°F) Technical Specification - AA Grade Elements For high efficiency oil removal/filtration prcede with AO grade filter Particle removal down to 0.01 microns, including water and oil aerosols Maximum remaining oil aerosol content: 0.01mg/m 3 or 0.01 ppm(w) at 21°C Standards ISO 8573.1 Supplied with AO or AA grade Filter as appropriate Key Characteristics QUALITY DIRT WATER OIL CLASS Particle size Pressure Dewpoint °C (Including vapour) in μm (ppm. vol) at 7 bar g (100 psi g) mg/m 3 1 0.1 -70 (0.3) 0.01 2 1 -40 (16) 0.1 3 5 -20 (128) 1.0 4 15 +3 (940) 5 5 40 +7 (1240) 25 6 - +10 (1500) -

Product Detail

New items

AF60P-060S, SMC

Modular Air Filter AF60 Series SMC's AF modular air filters are now easy to replace as the bowl and element are in one piece. The AF series is also more compact than the previous range. Improvements have also been made to the bowls with bowl guards now being transparent, users can monitor from any angle. Modular connection Polycarbonate bowl Filters, Lubricators and Separators High flow capacity filters, lubricators and separators with polycarbonate bowls. All have an ambient and media temperature range of 5 - 60°C and a proof pressure of 15 bar.

Product Detail

New items

AMF-EL150, SMC

SMC Micro Mist and Super Mist Elements A selection of replacements elements from the SMC, suitable for use with AM, AMD, AME and the AMF separator series. Filters, Lubricators and Separators High flow capacity filters, lubricators and separators with polycarbonate bowls. All have an ambient and media temperature range of 5 - 60°C and a proof pressure of 15 bar.

Product Detail

New items

AM-EL350, SMC

SMC Micro Mist and Super Mist Elements A selection of replacements elements from the SMC, suitable for use with AM, AMD, AME and the AMF separator series. Filters, Lubricators and Separators High flow capacity filters, lubricators and separators with polycarbonate bowls. All have an ambient and media temperature range of 5 - 60°C and a proof pressure of 15 bar.

Product Detail