Rates
1+
£ 9.67
Products Found: 883
Showing Results For: Threading Taps
Threading Taps
FILTERS
Filters
Showing
1 -
New Items
New items
E100 9N8, Dormer
Set of three E100 metric pitch HSS hand tap bits
Set of metric pitch HSS hand tap bits offered in a set of 3 parts (taper, intermediate and finishing tap bits).
Each set consists of a taper tap bit with an I/P of 5 threads; the intermediate has an I/P of 3.5 threads and the finishing model has an I/P of 2 threads.
The tap bit tolerance class is 6H, the cutting angle is 10° and the tap flutes are straight.
These high-quality tap bits are ideal for tapping in blind or through-holes.
Standard: DIN 352
New items
E294M5, Dormer
Dormer HSS-E TiN Coarse Fluteless Tap (E294)
High Speed Cobalt fluteless forming tap with Titanium Nitride coating specifically designed for use in floating tool holders and CNC machines.
Oil grooves to control the flow of coolant to the working area
High performance in a wide range of materials
Hig accuracy of cut and smoother surface finish than standard taps
Chip free operation resulting in a stronger, more resistant thread
DIN 2174
Fluteless Taps
New items
E002M2.5, Dormer
MTTX Spiral Flute Metric Coarse Machine Tap (E002)
For machining Metric Coarse threads in blind holes in most materials
Manufactured from premium grade powder metallurgy Steel
Increased Vanadium content
Capable of out-performing traditional HSS machine taps by up to 300%
Bright finish
Standards
Manufactured to ISO529 standards.
Special Application Taps - Dormer Vanguard
Designed with special cutting geometries and surface treatments to tap quickly and accurately in a specific range of engineering materials.
Coloured ring for quick identification of use
Made to ISO standards (tolerance Class 2 for 6H fit)
Selection Guide
Material type
Hardness (HB)
Blue
Yellow
White
Green
Black
Non-alloy steel
●
Stainless steel
●
Cast Iron
●
Titanium, pure
●
Titanium, alloyed
●
Nickel, pure
●
Copper & Brass
●
Brass & Bronze
●
Aluminium alloy, Si
●
Aluminium alloy, Si>10%
●
Thermoplastics
-
●
●
New items
E297M6, Dormer
HSS-E-PM SHARK Metric Coarse Spiral Tap for Low Alloy Steels (E297/E298)
HSS-E-PM machine tap for production of Metric Coarse threads in alloy steels.
Colour coded shank (yellow ring) for easy identification
Chrome plated finish
Manufactured to DIN 371/376 standards
Dormer 'Sharkline'
Designed with special cutting geometries and surface treatments to tap quickly and accurately in a specific range of engineering materials.
Suitable for machine tapping of Stainless steel
Colour coded ring for quick identification of use
Made to ISO standards (tolerance Class 2 for 6H fit)
New items
E297M8, Dormer
HSS-E-PM SHARK Metric Coarse Spiral Tap for Low Alloy Steels (E297/E298)
HSS-E-PM machine tap for production of Metric Coarse threads in alloy steels.
Colour coded shank (yellow ring) for easy identification
Chrome plated finish
Manufactured to DIN 371/376 standards
Dormer 'Sharkline'
Designed with special cutting geometries and surface treatments to tap quickly and accurately in a specific range of engineering materials.
Suitable for machine tapping of Stainless steel
Colour coded ring for quick identification of use
Made to ISO standards (tolerance Class 2 for 6H fit)
New items
E500 6.0 X 1.00 3FL SET3, Dormer
HSS Straight Flute Metric Coarse Hand Tap (E500)
HSS Straight Flute hand tap for producing metric coarse threads in most materials.
Suitable for tapping repeatable tolerance threads in through or blind holes by hand or machine
7° cutting rake angle
Bright finish
Standards
Manufactured to ISO529
Standards
ISO529
Contents
7777
New items
E513-M3/0,35, Dormer
E513 Fine Metric Pitch HSS Machine Tap Bits
A range of fine metric pitch HSS machine tap bits.
They have a tolerance class of 6H, a short, 2-thread entry, a 7° cutting angle and straight grooves.
Recommended for use in both through or blind holes and depths of up to
2 times diameter.
Surface treatment: shiny.
Standard: ISO 529
Rolled Flute Taps
Bright finish fluteless taps;
for use on copper, aluminium, magnesium, brass, zinc etc.
Flash chrome finish fluteless taps;
for use on steel up to 850N/mm
2
tensile strength, free matching and austenitic stainless steel
Made to ISO529 standard for tapping blind and through holes in a wide range of ductile materials
Smooth non-cutting action produces greater thread formed strength, higher life expectancy and increased tapping speeds especially where excessive tension occurs
New items
E003M4, Dormer
Spiral Flute
Specially formulated high helix of 48º allows adequate room for chip formation and rapid and smooth chip evacuation at high cutting speeds for threading blind holes of up to 2.5 x diameter of the tap used. The 3 radii flute profile gives a constant rake angle all along the flute length, while the short thread length means low torque and better chip evacuation.
MTTX-HSS Taps
MTT-X taps are manufactured from premium quality vanadium powder steel, branded HSS-XS1, for an unbeatable combination of toughness, edge strength and wear resistance. This winning combination enables them to withstand the stresses of threading in tough materials.
New items
E241M3, Dormer
E241 Spiral Point Blue Shark Metric Taps
Dormer Shark Line Blue Spiral Point Taps for Stainless Steel. Constructed from premium grade High Speed Cobalt (HSS-E) for increased hardness and improved edge strength.
Super-B (TiAlN + WC/C) coating with a treated edge for outstanding performance in Stainless Steel
High wear resistance and low material adhesion for less swarf build up and increased productivity
Engineering Taps - Spiral Point (Dormer)
Precision HSS taps designed to produce repeatable tolerance threads in most engineering materials. Suitable for medium/high rate production.
Spiral Point
7° cutting rake
Bright surface treatment
New items
E513-M18/1,50, Dormer
E513 Fine Metric Pitch HSS Machine Tap Bits
A range of fine metric pitch HSS machine tap bits.
They have a tolerance class of 6H, a short, 2-thread entry, a 7° cutting angle and straight grooves.
Recommended for use in both through or blind holes and depths of up to
2 times diameter.
Surface treatment: shiny.
Standard: ISO 529
Rolled Flute Taps
Bright finish fluteless taps;
for use on copper, aluminium, magnesium, brass, zinc etc.
Flash chrome finish fluteless taps;
for use on steel up to 850N/mm
2
tensile strength, free matching and austenitic stainless steel
Made to ISO529 standard for tapping blind and through holes in a wide range of ductile materials
Smooth non-cutting action produces greater thread formed strength, higher life expectancy and increased tapping speeds especially where excessive tension occurs
New items
E500-M1,20/0,25, Dormer
E500 HSS metric straight flute plug taps
Range of HSS machine taps, straight flute, metric.
6H tolerance class, a short, 2-thread input and a 7 ° cutting angle.
Recommended for use in both through or blind holes with a depth of up to 2 times diameter.
Polished finish.
Standard: ISO 529
Rolled Flute Taps
Bright finish fluteless taps;
for use on copper, aluminium, magnesium, brass, zinc etc.
Flash chrome finish fluteless taps;
for use on steel up to 850N/mm
2
tensile strength, free matching and austenitic stainless steel
Made to ISO529 standard for tapping blind and through holes in a wide range of ductile materials
Smooth non-cutting action produces greater thread formed strength, higher life expectancy and increased tapping speeds especially where excessive tension occurs
New items
227.20X250T3, Facom
The Facom 227 series is the standard taps. The size of the standard tap is the 20 mm and the overall length is the 112 mm.
HSS steel
Weight is the 490 g