Enrgtech

Deliver to

United Kingdom

Categories

Brands

Part Numbers

Top Products

0

Products Found: 1464

Showing Results For: IDC Connectors

IDC Connectors

IDC stands for Insulation Displacement Connector. They are designed for flat ribbon cables to ensure cable assembly and telecommunication applications.

Flat ribbon cable assemblies 

Insulation displacement connectors are more often used with flat ribbon cables. These cables comprise of numerous wires connected using a thin flat ribbon. These connectors have sharp contact terminals that penetrate the insulation and make a reliable connection with the wire. They are fast and easier since you are no longer need to strip shrouded wires, same as conventional cramping methods. Insulation displacement circuits are a typical ribbon cable endpoint. These connectors make use of cold welding technology. IDC connectors endpoint presses down and passes through the insulation of the wires. Meanwhile, a significant force is applied, which causes this cold weld. Most often, IDCs connectors come with a strain relief function that assists in securing the ribbon cable connection and enhance their healthy life and reliability. 

Take a look at specifications before purchasing the IDC:

  • Contacts number – IDCs are exits in the market with various pins and connections. For instance, 4-way and 10-way and it spread out over multiple rows. 
  • Gender - IDCs are manufactured in the male version, also called is a plug, and a female version called a socket or header. 
  • Pitch – this is the space between contacts. This is required compatibility with the ribbon connector or connectors that want to connect.
  • Mounting Type – IDC plugs and sockets most commonly mounted onto a cable use PCB as a header. 

Application using IDCs

  • Applications having Low Voltage
  • Laptops 
  • Computer Drive
  • Smart Phones 
  • SSDs
  • Other smart and intelligent communicating devices that is available in the market.

IDCs Significant Features

Ribbon Cable is manufactured in such a way that it is to be used with multi-contact connectors, where multiple IDCs connections can be established immediately. Therefore, this is time-saving because a new connection requires sufficient time for making a secure connection. This IDC’s connector is not designed to be used again and again but can be used if care is taken while removing the cable.

Pin-1 is commonly indicated on the surface of the connector by the uplift “V” mark. A red color often indicates these wires in a ribbon cable. At the same time, the connector pin-2 is contradictory to pin-1, and pin-3 is near proximity to pin-1 along the width of the connector.

Originally, IDCs were integrated with applications that require extra-low voltage, applications like telecommunications, networking devices, and signals required for a computer to connect with its peripherals.

However, domestic and industrial low voltage application has also started use of it. The advantages mentioned for their use in such sorts of applications stated that its installation speed exceeds up to 50%. This is because of the reduction in the stripping, screwing down, and twisted process.

Enrgtech is an electronic and electrical smart equipment supplier. Place your order now. It will be delivered once you are done with the purchasing process.


FILTERS
Filters
Showing
1 -
Enrgtech #
Manufacturer Part No
Name
Availability
Price
Rating
Klein Tools
VDV826604, Klein Tools
123 In Stock
Check Stock & Lead Times Packaging Options
25 +
£ 0.18
Klein Tools
VDV826605, Klein Tools
70 In Stock
Check Stock & Lead Times Packaging Options
25 +
£ 0.19
Rohs Verified
374210, ERNI
512 In Stock
Check Stock & Lead Times Packaging Options
240 +
£ 1.14
Rohs Verified
394441, ERNI
594 In Stock
Check Stock & Lead Times Packaging Options
280 +
£ 1.14
Rohs Verified
524471, ERNI
231 In Stock
Check Stock & Lead Times Packaging Options
85 +
£ 2.36
Rohs Verified
394968, ERNI
513 In Stock
Check Stock & Lead Times Packaging Options
238 +
£ 1.28
Rohs Verified
524401, ERNI
59 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 2.03
10 +
£ 1.81
25 +
£ 1.64
Rohs Verified
234480, ERNI
209 In Stock
Check Stock & Lead Times Packaging Options
90 +
£ 2.96
Rohs Verified
374209, ERNI
391 In Stock
Check Stock & Lead Times Packaging Options
180 +
£ 1.47
Rohs Verified
394971, ERNI
514 In Stock
Check Stock & Lead Times Packaging Options
238 +
£ 1.28
Rohs Verified
224396, ERNI
262 In Stock
Check Stock & Lead Times Packaging Options
120 +
£ 2.31
Rohs Verified
224400, ERNI
303 In Stock
Check Stock & Lead Times Packaging Options
140 +
£ 2.14
Rohs Verified
524431, ERNI
60 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 2.55
10 +
£ 2.28
25 +
£ 2.06
Rohs Verified
234451, ERNI
432 In Stock
Check Stock & Lead Times Packaging Options
204 +
£ 1.54
Legrand
Rohs Verified
0 048 89, Legrand
78 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 63.59
Rohs Verified
384529, ERNI
513 In Stock
Check Stock & Lead Times Packaging Options
240 +
£ 1.14
Rohs Verified
394911, ERNI
324 In Stock
Check Stock & Lead Times Packaging Options
144 +
£ 1.81
Rohs Verified
524481, ERNI
212 In Stock
Check Stock & Lead Times Packaging Options
75 +
£ 2.60
Rohs Verified
524491, ERNI
193 In Stock
Check Stock & Lead Times Packaging Options
65 +
£ 2.61
Amphenol ICC
Rohs Verified
71600-118LF, Amphenol ICC
418 In Stock
Check Stock & Lead Times Packaging Options
21 +
£ 0.70
210 +
£ 0.65
945 +
£ 0.55
Amphenol ICC
Rohs Verified
89947-708LF, Amphenol ICC
2022 In Stock
Check Stock & Lead Times Packaging Options
46 +
£ 0.63
322 +
£ 0.55
644 +
£ 0.47
Rohs Verified
514496, ERNI
58 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 3.78
10 +
£ 3.39
25 +
£ 3.06
Rohs Verified
234452, ERNI
433 In Stock
Check Stock & Lead Times Packaging Options
204 +
£ 1.54
Rohs Verified
234459, ERNI
502 In Stock
Check Stock & Lead Times Packaging Options
238 +
£ 1.30
Rohs Verified
234465, ERNI
231 In Stock
Check Stock & Lead Times Packaging Options
102 +
£ 2.65
Showing
1 -

New Items
New items
71600-008LF, Amphenol FCI

71600-008LF, Amphenol FCI

CONN SOCKET IDC 8POS DL SR 30AU
New items
71600-060LF, Amphenol FCI

71600-060LF, Amphenol FCI

CONN SOCKET IDC 60POS DL SR 30AU
New items
009176003022106, AVX

009176003022106, AVX

917 Series Discrete Wire IDC The 917 series of surface mount IDC connectors is designed to be used in harsh automotive and industrial applications, by connecting wires directly to PCB boards. The series has been tested to automotive levels of vibration and temperature cycling to prove how reliable and robust they are. Due to the simplicity of connecting a wire into the IDC connector by just using a small tool, this allows a wide range of devices to be connected without the need of soldering. Features: Ability to daisy chain PCB's together IDC contact provides a gas-tight connection Connector housing captures the wire insulation for positive strain relief High temperature insulator capable to 260°C re-flow soldering processes AVX Contacts
New items
2-111626-2, TE Connectivity

2-111626-2, TE Connectivity

TE Connectivity AMP-Latch 2.0mm IDC Receptacle Ribbon Cable Connectors AMP-LATCH IDC receptacle style IDC ribbon cable connectors with a 2.0 x 2.0 mm mating grid for 1.0 mm pitch ribbon cable. These AMP-LATCH 2mm pitch IDC ribbon cable connectors have IDC contacts, top/bottom single beam contact orientation and UL 94V-0 thermoplastic components. Ribbon cable receptacle connectors with part numbers X-111623-X have centre polarization Ribbon cable receptacle connectors with part numbers X-111626-X are non-polarized TE Connectivity AMP-Latch IDC Ribbon Cable Connectors The AMP-LATCH range of ribbon cable connectors consist of PCB headers and IDC ribbon cable receptacles. This connector system enables reliable gas tight connections to be made between ribbon cable and PCB circuitry allowing one PCB subsystem to be connected to another
New items
HIF3BA-20PA-2.54WB(71), Hirose

HIF3BA-20PA-2.54WB(71), Hirose

Ribbon Cable Connector Mechanism to Prevent Mis-insertion Applicable Cable UL2651 AWG#28 flat cable
New items
HIF3BA-64PA-2.54WB(71), Hirose

HIF3BA-64PA-2.54WB(71), Hirose

Ribbon Cable Connector Mechanism to Prevent Mis-insertion Applicable Cable UL2651 AWG#28 flat cable
New items
009176003011006, AVX

009176003011006, AVX

917 Series Discrete Wire IDC The 917 series of surface mount IDC connectors is designed to be used in harsh automotive and industrial applications, by connecting wires directly to PCB boards. The series has been tested to automotive levels of vibration and temperature cycling to prove how reliable and robust they are. Due to the simplicity of connecting a wire into the IDC connector by just using a small tool, this allows a wide range of devices to be connected without the need of soldering. Features: Ability to daisy chain PCB's together IDC contact provides a gas-tight connection Connector housing captures the wire insulation for positive strain relief High temperature insulator capable to 260°C re-flow soldering processes AVX Contacts
New items
3-640621-3, TE Connectivity

3-640621-3, TE Connectivity

TE Connectivity MTA-100 IDC Feed-Thru Connectors MTA-100 IDC Feed-Thru Connectors with a 2.54mm centreline pre-loaded with IDC contacts. These MTA-100 IDC Feed-Thru Connectors are end to end stackable and have moulded ribs on the housings to prevent reverse mating. MTA-100 IDC connectors with part numbers X-640620-X , X-640621-X and X-641653-X are without polarizing tabs. MTA-100 IDC connectors with part numbers X-644540-X and X-644563-X have polarizing tabs. For mating connectors see stock numbers 535-5080 , 719-6470 and 361-7033 typically. TE Connectivity MTA-100 2.54mm Interconnect System MTA-100 (Mass Termination Assembly) 2.54 mm pitch connector system for labour and cost saving mass termination of wires in wire-to-board and wire-to-wire applications. These MTA-100 connectors are based on IDC (insulation displacement contact) technology allowing one-step assembly and eliminating the need for wire stripping saving both time and cost. Using production hand tooling these MTA-100 IDC connectors can be quickly assembled to 28 AWG to 22 AWG discrete wire or notched ribbon cable. The MTA-100 connector system consists of female IDC connectors and PCB headers. The housings of the IDC connectors are colour coded according to wire size. Technical Specification Socket material Nylon Contact material Phosphor bronze Plating Tin Flammability rating UL94V-2 Header material Polyester Contact material Copper Alloy Insulation Resistance MΩ min 5000 Operating temperature °C -55 to +105
New items
3-644563-3, TE Connectivity

3-644563-3, TE Connectivity

TE Connectivity MTA-100 IDC Feed-Thru Connectors MTA-100 IDC Feed-Thru Connectors with a 2.54mm centreline pre-loaded with IDC contacts. These MTA-100 IDC Feed-Thru Connectors are end to end stackable and have moulded ribs on the housings to prevent reverse mating. MTA-100 IDC connectors with part numbers X-640620-X , X-640621-X and X-641653-X are without polarizing tabs. MTA-100 IDC connectors with part numbers X-644540-X and X-644563-X have polarizing tabs. For mating connectors see stock numbers 535-5080 , 719-6470 and 361-7033 typically. TE Connectivity MTA-100 2.54mm Interconnect System MTA-100 (Mass Termination Assembly) 2.54 mm pitch connector system for labour and cost saving mass termination of wires in wire-to-board and wire-to-wire applications. These MTA-100 connectors are based on IDC (insulation displacement contact) technology allowing one-step assembly and eliminating the need for wire stripping saving both time and cost. Using production hand tooling these MTA-100 IDC connectors can be quickly assembled to 28 AWG to 22 AWG discrete wire or notched ribbon cable. The MTA-100 connector system consists of female IDC connectors and PCB headers. The housings of the IDC connectors are colour coded according to wire size. Technical Specification Socket material Nylon Contact material Phosphor bronze Plating Tin Flammability rating UL94V-2 Header material Polyester Contact material Copper Alloy Insulation Resistance MΩ min 5000 Operating temperature °C -55 to +105
New items
1-2106489-2, TE Connectivity

1-2106489-2, TE Connectivity

Closed End IDC SSL Connectors (SMT & Thru Hole) IDC SSL closed end connectors that are designed for termination of discrete wires onto LED printed circuits boards. These IDC SSL connectors provide robust and stable electrical and mechanical power connection to single or multiple PCBs in solid state lighting and non-lighting applications. 18 - 24 AWG stranded and solid wire Dual IDC slots for redundancy Wire placement "viewing" window Wire gauge colour coded Tool-less termination TE Connectivity SMT and Thru-Hole Poke-In Wire Lighting Connectors
FAQs
We offer free shipping for orders over £200 if delivery is in the UK. All other orders in the UK, shipping from £7.99 depending on the weight and measurement. Mainland Europe shipping charges start from £25. For all other countries shipping charges start from £50 for products like IDC Connectors and all others.
You can email us directly at sales@enrgtech.co.uk or via our website for any queries regarding IDC Connectors or any other product.
This depends on the IDC Connectors individual product and information that can be found on our website.
Yes, we offer special discounts on orders above £200 for IDC Connectors and all other products.
UK orders normally take between 2/3 working days. International orders normally take between 3/5 working days for all products including IDC Connectors.
Yes. We keep updating our stock frequently and if a product like IDC Connectors is not in stock then we will let you know.