Rates
100+
£ 1.77
Products Found: 26
Showing Results For: Connector Covers
Connector Covers
FILTERS
Filters
Showing
1 -
New Items
New items
1-102537-5, TE Connectivity
TE Connectivity Covers for AMPMODU MT Double Row Receptacle Assemblies
This range of Accessories for the AMPMODU MT Series includes:
X-102537-X Low profile Snap-on Ejection front covers
X-102681-X Low profile latching style front covers
X-102536-X Low profile back cover for shielding and non-shielding applications
Type B Latching
Number of Ways
Type C Ejection
Number of Ways
Type E Shielding and Non-Shielding Applications
Number of Ways
782-9075
16
782-9085
20
782-9091
16
782-9079
20
782-9094
50
782-9101
20
782-9072
16
782-9097
12
797-2135
10
2.54mm TE Connectivity AMPMODU MT Range
The AMPMODU MT Interconnection System has pre-loaded double row receptacle assemblies with Snap-on covers. The IDC contacts are preloaded into the AMPMODU MT Receptacles for mass termination appications.
New items
New items
103681-5, TE Connectivity
AMPMODU MTE Coupling Shrouds for Receptacle Assemblies with Guide Ribs
Coupling shrouds for AMPMODU MTE 2.54mm receptacle assemblies with guide ribs. These double row AMPMODU MTE coupling shrouds are made from flame retardant thermoplastic and allow ganging of smaller receptacle connectors that have guide ribs to form large latching connectors.
TE Connectivity AMPMODU MTE Interconnection System
AMPMODU MTE 2.54 mm pitch connector system for labour and cost saving mass termination of wires in wire-to-board and wire-to-wire applications. These MTE connectors are based on IDC (insulation displacement contact) technology allowing one-step assembly and eliminating the need for wire stripping saving both time and cost. Using production hand tooling these MTE IDC connectors can be quickly assembled to discrete wire. The AMPMODU MTE connector system consists of single row receptacle housings preloaded with IDC contacts and PCB headers. Coupling shrouds are also available which allow the ganging of connectors to form larger single row or double row connectors
New items
229968-2, TE Connectivity
TE Connectivity CHAMP LATCH Accessories
782-5455
Screwlock, 4-40 UNC male to M3.5 female, Hardware Kit for Shielded Champ Latch connectors.
797-2139
CHAMP Plug Dust Cover, Blue, for 50 way D-Sub connector.
797-2148
CHAMP Receptacle Dust Cover, Red, for 50 way D-Sub connector.
823-6803
CHAMP Plug Dust Cover, Blue, for 64 way D-Sub connector.
823-6806
CHAMP Plug Dust Cover, Red, for 64 way D-Sub connector.
823-6862
CHAMP Bail Clip stainless steel.
823-6866
CHAMP Stud with 8.6 mm Standoff, M3.5 female, 4-40 UNC male.
823-6888
CHAMP 0.8 mm Series Latching Post for Spring Latch Backshells.
Champ connectors
New items
293736-1, TE Connectivity
TE Connectivity Micro MATE-N-LOK 3mm Strain Relief Cover Kits
Strain relief cover kits for use with Micro MATE-N-LOK connectors. These Micro MATE-N-LOK strain relief cover kits are made from black nylon GF. The kits include a plug or socket housing and a coverpart A and coverpart B. The covers are also available separately, two need purchasing for each connector.
Stock number
865-7089
is a kit comprising of connector housing (stock number
495-8975
) and 2 cover halves
Stock number
865-7083
is a kit comprising of connector housing (stock number
680-2120
) and 2 cover halves
Stock number
865-7092
is a kit comprising of connector housing (stock number
495-8997
) and 2 cover halves
Stock number
865-7095
is a kit comprising of connector housing (stock number
680-0812
) and 2 cover halves
Stock number
865-7067
is coverpart A for connector stock number
495-8975
Stock number
865-7061
is coverpart B for connector stock number
495-8975
Stock number
865-7070
is coverpart A for connector stock number
680-2120
Stock number
865-7073
is coverpart B for connector stock number
680-2120
Stock number
865-7077
is coverpart A for connector stock number
680-0812
Stock number
865-7086
is coverpart B for connector stock number
680-0812
TE Connectivity Micro MATE-N-LOK 3mm Connector System
The Micro MATE-N-LOK 3mm connector system is a wire-to-wire and wire-to-board connector system with contacts on a 3mm centreline and a maximum current rating of 5A. This connector system consists of plug and receptacle for wire-to-wire and wire to panel configurations and PCB headers for wire to board connections. When combined these connectors can be used in a wide range of industrial and consumer applications. The Micro MATE-N-LOK 3 mm connector range includes versions with a low profile 4.7 mm mating height making them ideal for use in LED lighting applications
Voltage rating
250V
Current rating
5.0 A max. on 20 AWG wire
Contact resistance
20 mΩ max. final
Contact material
...
New items
822115-4, TE Connectivity
TE Connectivity IC Socket Accessories
A range of accessories for use with PLCC IC sockets
Stock number
718-5252
is a U lever type ILM cover assembly for an LGA socket
Stock numbers
718-5262
and
821-2611
are plastic covers for MQFP IC sockets, 28mm square, 0.65mm pitch.
718-5262
is 144 way, stock number
821-2611
is 160 way.
Stock number
821-2670
is an extraction tool for 32 way PLCC sockets.
New items
New items
102536-3, TE Connectivity
TE Connectivity Covers for AMPMODU MT Double Row Receptacle Assemblies
This range of Accessories for the AMPMODU MT Series includes:
X-102537-X Low profile Snap-on Ejection front covers
X-102681-X Low profile latching style front covers
X-102536-X Low profile back cover for shielding and non-shielding applications
Type B Latching
Number of Ways
Type C Ejection
Number of Ways
Type E Shielding and Non-Shielding Applications
Number of Ways
782-9075
16
782-9085
20
782-9091
16
782-9079
20
782-9094
50
782-9101
20
782-9072
16
782-9097
12
797-2135
10
2.54mm TE Connectivity AMPMODU MT Range
The AMPMODU MT Interconnection System has pre-loaded double row receptacle assemblies with Snap-on covers. The IDC contacts are preloaded into the AMPMODU MT Receptacles for mass termination appications.
New items
EN3CAPX, Switchcraft
Panel mount
From Switchcraft, this EN3 Series panel mount connector boasts secure connection and exceptional environmental qualities- surpassing Coast Guard requirements in terms of water-tightness.
Note
Cable connectors will mate with in-line connectors and panel connectors (plug to socket or vice-versa). In-line connectors do
NOT
mate with panel connectors.
Switchcraft EN3 and EN2 Series
Mini weather-tight connectors with integral O-ring and gasket, offering superior leakage protection and low part count. When mated or covered, the IP68 rating makes them ideal for use in process control, marine, medical instrumentation, transportation, industrial electronic applications and similar hostile environments.,A polarising keyway and 1//4 turn locking mechanism prevent misalignment and unintentional disconnection. Cable mounting assemblies feature a snap-in place strain relief mechanism. Thermoplastic rubber boots push fit over the rear of the connector and provide further strain relief for cables up to 6.7mm dia.Optional protective cap available separately for panel plugs and sockets when not in use.
Body materials
Panel Body and Contact Locking Disk: Thermoplastic polymer glass fibre. Interior: Thermoplastic rubber
Current rating per contact in isolation
7.5A (3.0A –12 way only)
Voltage rating
240V a.c.
Contact resistance
≤ 3mΩ
Insulation resistance
100MΩ
Temperature range
-40 to +65°C
Contact material
Copper alloy, with gold over nickel plating
Termination type
Solder bucket
Wire gauge
20 awg (26awg – 12 way only)
Matching cycles
>600
Flammability rating
UL94V-0
Note
Cable connectors will mate with in-line connectors and panel connectors (plug to socket or vice-versa). In-line connectors do NOT mate with panel connectors.
New items
2839995, Phoenix Contact
WESTERNTRAB® protection for flush IT sockets
TERMITRAB is a junction block featuring several levels of protection. Its ultra-compact design features a pitch of 6.2 mm and it snaps onto a symmetric rail. A jumper connection is automatically established between the earth reference point of the circuit and the profile.
Features and Benefits
Screw connection
Two tier terminal block
Separate PE connection
Protection of a floating double wire
Technical specifications
Application:
Analogue line / RTC
Number of protected pairs:
1
Maximum operating voltage:
170 Vdc
Nominal current:
300 mA
Rated discharge surge current (8/20 μs):
5 kA
Max. discharge surge current (8/20μs):
10 kA
Output voltage limit for 1 kV/μs in MD/MC:
250 V /650 V
Response time in MC/MD:
1 ns / 100 ns
Circuit resistance:
9.4 Ω
Operating temperature:
- 40 °C → + 85 °C
Footprint:
80 x 55 x 6.2 mm
New items
GT17-8DS-SC(70), Hirose
Hirose GT17 Series 8 Way Right Angle Automotive Cable Connector Components
A range of components that connect together to form a GT17 series 8 way right angle automotive cable connector. For a complete 8 way automotive cable connector a keyed housing, insulator, outer terminal, shield plate, retainer and centre terminal need to be purchased separately.
Stock number
824-4946
is a keyed light grey PBT housing
Stock number
824-4974
is a dark grey PBT insulator
Stock number
824-4942
is an outer terminal made from phosphor bronze with a tin plating
Stock number
824-4955
is a shield plate made from copper alloy with a tin plating
Stock number
828-8876
is a female centre terminal with a wire size range of 24 to 28 AWG
This GT17 right angle automotive cable connector will mate with GT17 8 way PCB headers with the same light grey keyed housings.
Hirose GT17 Series Multi-Contact Automative Connectors for USB Applications
GT17 series high speed transmission multi-contact connectors for high frequency applications especially suited for automotive USB in-car communications and multi-media systems. These GT17 automotive USB style connectors have a shielded surface construction, use crimp technology and have contact retention features including colour coding, polarization and audible latches. Available as intermating PCB headers and cable mount connectors with 4, 6, 8 or 10 way contact configurations.
New items
EC156F-10-C, ITW Pancon
MAS-CON Accessories
679-2566
is a snap-on Cover for a 10 way Series CE/CT 156 End Connector (stock number
473-515
).
2.54/3.96mm Discrete Wire IDT
This IDC system offers a quick and effective method of terminating discrete wire to PCBs.
Female connectors mate with shrouded or unshrouded straight or 90° 10-way headers
Unshrouded headers can be sub-divided to the required number of ways
Available on a 2.54mm (0.1in) and 3.96mm (0.156in.) pitch