TE Connectivity LSA-Plus and LSA-Profil Connection Modules and Tool
A range of TE Connectivity LSA-Plus and LSA-Profil Connection and Disconnection Modules.
The Insertion and Extraction Tool, stock number
813-5814
, is fitted with a sensor which trims excess cable when a termination has been completed. The conductor diameter range of the LSA+ Insertion Tool is 0.35 to 2.6 mm with an outside diameter range of 0.7 to 2.6 mm. The LSA-Plus Insertion Tool also includes a cutting inhibitor clip, extraction hook and module removal blade.
Special Features
:
813-5845
LSA-PLUS disconnection module with 6 off 3 wire shielded pairs
813-5836
LSA-PLUS disconnection module with screw terminals for wires up to 2.5 mm²
813-5848
LSA-PLUS disconnection module has numbering 0 to 9
813-5810
LSA-PROFIL disconnection module has numbering 0 to 9
813-5858
LSA-PROFIL switching module printed jumper side 1...0
Technical Specifications
Thread dimensions:
Rigid thread a): Ø 0.4-0.8 mm b)
Isolation: Ø 0.7-1.5 mm, PVC and PE
No. of threads per contact:
2 max. (with identical dimensions) c)
Insulation resistance:
≥ 5
´
10
4
MΩ
Test voltage:
≥ 2kV
Surge voltages:
As VDE 0433
Contact resistance:
Typical 1 mΩ
Constant current:
Determined by the thread max.
allowed current
Surge current:
Disconnections modules: 5As 5kA 8//20 μs
Contact stud bars: 10As 10kA 8//20 μs
a)
certain kinds of soft thread can be used.
b)
After use of thread larger than Ø 0.65 mm only
that later on thinner thread is not used.
c)
Thread dimensions: Ø 0.4 - 0.65 mm.