Products Found: 188
Showing Results For: Ethernet Media Converters
Ethernet Media Converters
FILTERS
Filters
Enrgtech #
Manufacturer Part No
Name
Availability
Price
Rating
Startech
ET1000S40LC2, Startech
1 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 423.82
Startech
ET90110SM302, Startech
5 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 163.07
Startech
ET91000LC2, Startech
13 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 230.44
Startech
MCM1110MMLC, Startech
65 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 113.81
Startech
ET90110SC2, Startech
9 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 76.58
Startech
ET91000SM10, Startech
12 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 281.15
Startech
MCMGBSC15GB, Startech
17 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 136.84
Startech
ET91000SM20, Startech
4 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 245.54
Startech
ET91000SC2, Startech
6 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 150.54
ICP DAS USA
I-7520A, ICP DAS USA
53 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 132.48
ICP DAS USA
I-7520, ICP DAS USA
20 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 95.31
Weidmuller
1504460000, Weidmuller
46 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 238.91
Weidmuller
1241400000, Weidmuller
2 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 237.65
Showing
1 -
New Items
New items
New items
New items
New items
MCMGBSC15GB, Startech
1000 Mbps Gigabit Multimode Fiber Ethernet Media Converter SC
The StarTech 1000 Mbps Gigabit Multimode fibre Ethernet Media Converter SC - 550 m converts transparently to/from 1000Base-T Ethernet signals and 1000Base-SX optical signals. This Fibre Media Converter delivers a simple solution for connecting Gigabit Ethernet networks to remote locations using SC-terminated MM fibre
850 nm Wavelength
LED Indicators for simple Ethernet/Fiber network link monitoring
Compact design
Simple installation
Auto detects half/full duplex transfer mode from the TX port
Auto negotiation MDI/MDI-X (Crossover for TX port)
Supports forced full duplex or auto-negotiation modes on the fibre link
Supports a maximum multimode fibre optic cable distance of 550 m
Supports 802.3ab 1000Base-TX, and 1000Base-FX industry standards
Supports IEEE 802.1q Tag VLAN pass through
Supports transparent Q-in-Q double tagged frames
Fiber Media Converters
New items
POEINJ4G, Startech
4-Port Gigabit Midspan - PoE+ Injector
This POEINJ4G Gigabit midspan PoE+ injector is a cost-effective alternative to upgrading your existing network switch to a PoE-capable model. Power and access up to four high-power PoE-compliant devices - such as IP cameras - using standard Ethernet cable
Easily connect, power, and operate up to 4 Gbit Low-powered devices (PD)
Delivers FullPOWER to each port - up to 30.8 W (802.3at) or 15.4 W (802.3af) to each connected device
Flexible setup, with a desktop-sized or wall-mountable metal housing
Plug-and-play setup and operation
Automatically detects the powered device to provide the appropriate level of power output
Circuit protection prevents power interference between each port
Support for 10/100/1000 Mbps networks and devices, as well as Auto-Negotiation and auto-MDIX
The 4-Port Power over Ethernet+ injector lets you connect your PoE-powered devices (PDs) to a non-PoE-capable switch
Ethernet Switches
New items
MCMGBSCSM10, StarTech.com
MCMGBSCSM10 Fibre Media Converter
Extend your GbE network cost-effectively
Reliable and scalable network connectivity
Features & Benefits
Applications
Whats in the package?
New items
CSM-400-1214, MOXA
The Moxa Europe Ethernet-to-fibre managed media converters for the NRack system. The modules provide media conversion from 10/100BaseT(X) to 100BaseFX (with SC/ST connectors), and can be installed in any NRack system chassis. The CSM-400 modules support LFP and FEF for easily tracing network link failures, and support store-and-forward and pass-through modes, 802.3AM OAM for remote management and monitoring, as well as WDM-type fibre modules to reduce fibre cable cost.
LFP (Link Fault Pass-Through) and FEF (Far End Fault)
Supports store-and-forward mode and pass-through mode
Auto-negotiation
Supports IEEE 802.3AH OAM protocol
Plug and play
Hot-swappable
IP-based remote management
Supports WDM type modules
New items
TCF-142-M-SC-RM, MOXA
The Moxa Europe RS-232/422/485 to fibre slide-in module convert from the RS-232, RS-422, or RS-485 signal to a fibre-optic signal. It is used for the NRack system.
1 or 150 kilo-ohm adjustable pull high/low resistor
Supports ring and point-to-point transmission
New items
ICF-1150I-S-SC-T, MOXA
The Moxa Europe ICF-1150 serial-to-fibre converters transfer RS-232/RS-422/RS-485 signals to optical fibre ports to enhance transmission distance. When an ICF-1150 device receives data from any serial port, it sends the data through the optical fibre ports. These products not only support single-mode and multi-mode fibre for different transmission distances, models with isolation protection are also available to enhance noise immunity.
-40 to 85°C wide-temperature range models available
C1D2, ATEX, and IECEx certified for harsh industrial environments
Rotary switch to change the pull high/low resistor value
Overload current protection
New items
ICF-1150-M-SC-T-IEX, MOXA
The Moxa Europe ICF-1150 serial-to-fibre converters transfer RS-232/RS-422/RS-485 signals to optical fibre ports to enhance transmission distance. When an ICF-1150 device receives data from any serial port, it sends the data through the optical fibre ports. These products not only support single-mode and multi-mode fibre for different transmission distances, models with isolation protection are also available to enhance noise immunity.
-40 to 85°C wide-temperature range models available
C1D2, ATEX, and IECEx certified for harsh industrial environments
Rotary switch to change the pull high/low resistor value
Overload current protection
New items
ICF-1150-M-ST-T-IEX, MOXA
The Moxa Europe ICF-1150 serial-to-fibre converters transfer RS-232/RS-422/RS-485 signals to optical fibre ports to enhance transmission distance. When an ICF-1150 device receives data from any serial port, it sends the data through the optical fibre ports. These products not only support single-mode and multi-mode fibre for different transmission distances, models with isolation protection are also available to enhance noise immunity.
-40 to 85°C wide-temperature range models available
C1D2, ATEX, and IECEx certified for harsh industrial environments
Rotary switch to change the pull high/low resistor value
Overload current protection
New items
IMC-101-M-SC-IEX, MOXA
The Moxa Europe IMC-101 industrial media converters provide industrial-grade media conversion between 10/100BaseT(X) and 100BaseFX (SC/ST connectors). The IMC-101 converters reliable industrial design is excellent for keeping your industrial automation applications running continuously and each IMC-101 converter comes with a relay output warning alarm to help prevent damage and loss.
-40 to 75°C operating temperature range (-T models)
Designed for hazardous locations (Class 1 Div. 2/Zone 2, IECEx)
Link Fault Pass-Through (LFPT)
Redundant power inputs