Featured Products
Fibre Optic Test Kit including Light Source and Power Meter The FiberMASTER fibre optic test kit quickly measures cabling loss with the automatic...
The TREND Networks launch cable is a 150m cable for FiberMASTER fiber optic testers. SC-SC Connector OM4 (optimized multimode)
The TREND Networks OTDRs feature both high dynamic range and small dead zones which provides precision required for installation and troubleshoot...
The TREND Networks SignalTEK NT uses a test method known as wide area networks for transmission testing to prove the performance of a network by...
LanXPLORER Remote Kits Set of Smart Remote-Adapter for LanXPLORER series
LanXPLORER Fibre Kits Single-Mode and Multimode SFP options 1000BASE-SX, and LX support Hub blink
Popular Categories For TREND Networks
Categories For TREND Networks
Popular Items
Popular items
Popular items
FibreMaster Quad, TREND Networks
Fibre Optic Test Kit including Light Source and Power Meter
The FiberMASTER fibre optic test kit quickly measures cabling loss with the automatic calibration feature that stores reference power from any light source for quick dB loss calculations. This equipment allows the user to measure absolute power and calculate the loss of fibre optic links at several wavelengths. The dB calibration feature allows the operator to set a reference level to the light source and directly read the loss of fibre optic links without the need to manually calculate the values.
This kit features 850, 1300, 1310 and 1550 wavelength measurement capabilities and the light source has interchangeable connectors. The unique design of this test kit allows the light source to be docked neatly within the power meter making the kit compact for easy storage while still allowing full operation of both, the source and meter.
Features and Benefits
850/1300nm LED light source
1310/1550nm laser diode
Includes 2 x ST, SC and FC adapters
Power LED lights green when light source is active
Docks in the bottom of the power meter for easy storage
Operates on standard 3xAAA batteries (not supplied)
Low battery indication
Operating temperature ranges between p -10°C and 60°C(Power meter)
Operating time 360 hours(Power meter)
Applications
Measure and locate high loss splices
Measure and locate high loss connections and breaks
Locate the end of the fibre
Find potential sources of error caused by reflectance from dirty or poor connections
Detects live optical signals before it begins testing
Certifications
ANSI/ESD S20.20:2014
BS EN 61340-5-1:2007
Popular items
R240-ML-SCSC, TREND Networks
The TREND Networks launch cable is a 150m cable for FiberMASTER fiber optic testers.
SC-SC Connector
OM4 (optimized multimode)
Popular items
R240-PIP, TREND Networks
The TREND Networks OTDRs feature both high dynamic range and small dead zones which provides precision required for installation and troubleshooting. The software simplifies certification of cabling with simple pass/fail results. These OTDRs can be complicated to configure and achieve accurate results. The 1625nm wavelength allows in service testing of networks without interrupting existing subscribers.
Compatible with the auto centering pass and fail video probe
Auto test up to three wavelengths
Auto wavelength switching
Universal power meter and light source adapters
Storage up to 40,000 tests
Bright colour display
Rechargeable lithium battery
USB interface
Automatic image positioning
Popular items
STNT-KIT, TREND Networks
The TREND Networks SignalTEK NT uses a test method known as wide area networks for transmission testing to prove the performance of a network by sending ethernet data through cables and network devices. It generates test reports automatically in PDF or CSV format. The network transmission tester requires no configuration by the user as the two handsets pair automatically for tests.
PoE/PoE+ detection
Web data performance
IP video performance
Blink switch link LED
Popular items
Popular items
Popular items
Popular items
Popular items
Popular items
150059, TREND Networks
LanXPLORER Remote Kits
Set of Smart Remote-Adapter for LanXPLORER series
Popular items
RMGKLX2, TREND Networks
LanXPLORER Fibre Kits
Single-Mode and Multimode SFP options
1000BASE-SX, and LX support
Hub blink
New Items
New items
R240-ML-SCSC, TREND Networks
The TREND Networks launch cable is a 150m cable for FiberMASTER fiber optic testers.
SC-SC Connector
OM4 (optimized multimode)
New items
R240-PIP, TREND Networks
The TREND Networks OTDRs feature both high dynamic range and small dead zones which provides precision required for installation and troubleshooting. The software simplifies certification of cabling with simple pass/fail results. These OTDRs can be complicated to configure and achieve accurate results. The 1625nm wavelength allows in service testing of networks without interrupting existing subscribers.
Compatible with the auto centering pass and fail video probe
Auto test up to three wavelengths
Auto wavelength switching
Universal power meter and light source adapters
Storage up to 40,000 tests
Bright colour display
Rechargeable lithium battery
USB interface
Automatic image positioning
New items
STNT-KIT, TREND Networks
The TREND Networks SignalTEK NT uses a test method known as wide area networks for transmission testing to prove the performance of a network by sending ethernet data through cables and network devices. It generates test reports automatically in PDF or CSV format. The network transmission tester requires no configuration by the user as the two handsets pair automatically for tests.
PoE/PoE+ detection
Web data performance
IP video performance
Blink switch link LED
New items
New items
New items
New items
New items
FibreMaster Quad, TREND Networks
Fibre Optic Test Kit including Light Source and Power Meter
The FiberMASTER fibre optic test kit quickly measures cabling loss with the automatic calibration feature that stores reference power from any light source for quick dB loss calculations. This equipment allows the user to measure absolute power and calculate the loss of fibre optic links at several wavelengths. The dB calibration feature allows the operator to set a reference level to the light source and directly read the loss of fibre optic links without the need to manually calculate the values.
This kit features 850, 1300, 1310 and 1550 wavelength measurement capabilities and the light source has interchangeable connectors. The unique design of this test kit allows the light source to be docked neatly within the power meter making the kit compact for easy storage while still allowing full operation of both, the source and meter.
Features and Benefits
850/1300nm LED light source
1310/1550nm laser diode
Includes 2 x ST, SC and FC adapters
Power LED lights green when light source is active
Docks in the bottom of the power meter for easy storage
Operates on standard 3xAAA batteries (not supplied)
Low battery indication
Operating temperature ranges between p -10°C and 60°C(Power meter)
Operating time 360 hours(Power meter)
Applications
Measure and locate high loss splices
Measure and locate high loss connections and breaks
Locate the end of the fibre
Find potential sources of error caused by reflectance from dirty or poor connections
Detects live optical signals before it begins testing
Certifications
ANSI/ESD S20.20:2014
BS EN 61340-5-1:2007
New items
New items
150059, TREND Networks
LanXPLORER Remote Kits
Set of Smart Remote-Adapter for LanXPLORER series
New items
RMGKLX2, TREND Networks
LanXPLORER Fibre Kits
Single-Mode and Multimode SFP options
1000BASE-SX, and LX support
Hub blink
New items
Don’t hesitate to ask questions for better clarification.