What are the shipping charges for products like Non Contact Safety Switches?

Yes. We keep updating our stock frequently and if a product like Non Contact Safety Switches is not in stock then we will let you know.

How do I contact the Customer Support Team?

Yes. We keep updating our stock frequently and if a product like Non Contact Safety Switches is not in stock then we will let you know.

Where are your products like Non Contact Safety Switches manufactured?

Yes. We keep updating our stock frequently and if a product like Non Contact Safety Switches is not in stock then we will let you know.

Do you offer any discounts on bulk orders of products like Non Contact Safety Switches?

Yes. We keep updating our stock frequently and if a product like Non Contact Safety Switches is not in stock then we will let you know.

How long will it take to receive the order that I placed for Non Contact Safety Switches?

Yes. We keep updating our stock frequently and if a product like Non Contact Safety Switches is not in stock then we will let you know.

Are your products Non Contact Safety Switches in stock?

Yes. We keep updating our stock frequently and if a product like Non Contact Safety Switches is not in stock then we will let you know.

Non Contact Safety Switches | Magnetic Safety Switch

New items

1091946, Sick

The Erwin sick inductive proximity sensor has a Semiconductor (OSSD) type of out put works with a supply voltage of 24V DC and the housing material of this sensor is made of nickel plated brass. Sensing range (Sn) up to 4 mm –25°C to +70°C storage temperature 10Hz to 55Hz vibration resistance Less then 100Hz actuation frequency

Product Detail

New items

RE11-SAC, Sick

SICK Magnetic Safety Switches The RE1 and RE2 series from SICK are compact non-contact safety switches with a long service life thanks to the durable and low maintenance design. Just one of these safety switches, in conjunction with a suitable safety module, makes it possible to solve applications up to PL e and Cat. 4 (EN ISO 13849). These magnetic switches are easy to clean, making them suitable for contaminated areas or environments with strict hygiene standards. Flexi Loop now enables a safe series connection with enhanced diagnostics capabilities and minimal wiring effort. Up to performance level PL e / Cat. 4 (EN ISO 13849) Sensors with plug connector or connected cable Flexi Loop-compatible M12 plug connector High tolerances for door misalignment Glass-fiber reinforced PPS rectangular housing Both RE1 & RE2 are supplied with a switch and actuator offering significant cost saving Spare actuators are also available separately RE1 Response range of up to 7 mm 1 NO/1 NC or 2 NO contacts RE2 1 NO/1 NC, 2 NO contacts or 3 NO contacts Fast diagnostics via LED status indicator (RE27) Note The actuators are only coded in the sense that they have an identical magnetic combination making them type specific not individual example specific.

Product Detail

New items

IN40-D0304K, Sick

Overview The IN4000 Standard inductive safety switches are used for determining position and work on a non-contact basis. These safety switches are actuated through metal (e.g., ST37 steel) so that no separate actuator is required. It has a single-channel operating principle: a pulsed input signal is converted to a pulsed output signal and evaluated by the connected safety controller. The response time of the sensors is monitored spatially and chronologically, enabling better prevention against tampering and a high level of safety protection. Their non-contact operating principle enables simple adjustment and mounting as well as providing increased shock and vibration resistance. At a glance One clocked safety output for direct connection of sensors to a safety controller IP67 or IP69K enclosure rating Response range up to 15 mm LED status indicator Up to performance level PL e (EN ISO 13849) Safe series connection of sensors possible Your Benefits Fast diagnostics via LED status indicator Cascadability of up to 9 sensors saves costs Long service life due to durable and low-maintenance design Just one safety switch in conjunction with a suitable safety module makes it possible to solve applications up to PL e (EN ISO 13849) The devices are easy to clean, making them suitable for contaminated areas or environments with strict hygiene standards Applications Position determination of hazardous movements Position monitoring in areas with limited access Note Product details cover the whole product family. For details on the specifications for this individual product, please refer to the datasheet.

Product Detail

New items

XCSDMR5912, Telemecanique

XCS-DMR Coded Magnetic Safety Switches, Cylindrical The Schneider XCS-DMR coded magnetic safety switches are designed for monitoring the doors, covers and guards of industrial machines with imprecise guiding and low inertia. These safety switches are ideally suited for machines subjected to frequent washing or liquid spray. They protect the operator by immediately stopping any dangerous movement as soon as the distance between the switch and its magnet is greater than 8mm. 1 approach direction 8mm tolerance to misalignment LED versions have an LED in series with one N/C giving indication when guard is closed Coded reed technology - switch cannot be totally defeated by a simple magnet Cylindrical plastic housing Dimensions: Ø30 x 38.5mm Available pre-cabled or with connector on flying lead IP66/67 protection in accordance with EN/IEC 60529 ROHS compliant Note With the appropriate monitoring system and correctly wired these switches can reach safety category 4 conforming to EN/ISO 13849-1, PL e conforming to EN/ISO 13849-1, SIL 3 conforming to EN/IEC 61508. Approvals UL, CSA. Standards IEC 947-1; EN 547-5-1; EN 547-5-3; EN 60204-1; EN 1088.

Product Detail

New items

540080, Pilz

PSENcode Large Actuator The PSEN cs1.1 1 actuator is designed for use with the PSENcode large design non-contact safety switches. Features and Benefits Transponder technology Large design IP6K9K protection Approvals CE, cULus Listed, TÜV.

Product Detail

New items

541009, Pilz

PSENcode Compact Non-Contact Safety Switch, Coded The PSEN cs3.1 and PSEN cs3.1p safety switches are coded and only switch with an actuator from the PSEN cs3.1 series. There is no restriction on the number of times the actuator can be used and reset. Features and Benefits Transponder technology for presence detection (safety function) Coded switch Dual-channel operation 2 safety inputs for series connection of multiple safety switches 2 safety outputs 1 signal output LED display for state of the actuator, state of the inputs and supply voltage/fault 1 direction of actuation IP69K protection Stock no. 918-6655 has an M12 8 pole male connector Stock no. 918-6664 has an M8 8 pole male connector Caution The safety level PLe (Cat. 4)/SIL CL 3 is only achieved if the safety outputs use 2-channel processing. Standards EN 60947-5-3 with the actuator PSEN cs3.1 PDDB; EN 62061 SIL CL 3; EN ISO 13849-1 PLe Cat. 4; EN ISO 14119 coding level Low, Type4. Approvals CE, cULus Listed, TÜV, BG, CCC. Supplied with Actuator.

Product Detail

New items

542011, Pilz

PSENcode Slim Non-Contact Safety Switch, Coded The PSEN cs5.11 and PSEN cs5.1p safety switches are coded and only switch when used with an actuator from the PSEN cs1.1 series. There is no restriction on the number of times the actuator can be used and reset. Features and Benefits Transponder technology for presence detection Coded switch Dual-channel operation 2 safety inputs for series connection of multiple safety switches 2 safety outputs Safety Device Diagnostics (SDD) Safety Device Diagnostics can be used to poll sensor information, to perform actions and to read configuration parameters Diagnostic input for Y1 for Safety Device Diagnostics (SDD) Signal output/diagnostic output Y32 for Safety Device Diagnostics LED display for state of actuator detection, state of the inputs and supply voltage/fault IP66 / IP67 protection PSEN cs5.11 (stock no. 918-6667 ) 1 actuation direction with 3 approach directions: square marking for normal operating distance M12 8 pole male connector 30 N holding force PSEN cs5.1p (stock no. 918-6661 ) 4 actuation directions, each with 3 approach directions: square marking for normal operating distance and triangle marking for short operating distance M8 8 pole male connector Caution The safety level PLe (Cat. 4)/SIL CL 3 is only achieved if the safety outputs use 2-channel processing. Standards EN 60947-5-3; EN 62061 SIL CL 3; EN ISO 13849-1 PLe Cat. 4; EN ISO 14119 Coding level Low, Type4. Approvals CE, TÜV, UL/cUL, FCC, IC, ECOLAB. Supplied with Actuator.

Product Detail

New items

440N-G02023, Allen Bradley Guardmaster

Ferrogard 6, 9 & 10 Slim Non Contact Safety Switch The Ferrogard FRS 6, 9 and 10 are magnetically actuated non-contact safety switches which offer reliability and a high tolerance to misalignment. Designed to be installed on a guard door, the action of the magnetic actuator being removed from the switch opens the N.C. safety contacts therefore isolating the control power to the machines primary control element. Moulded in ABS plastic with a slim rectangular housing to accommodate narrow mounting areas and sealed to IP67 (NEMA 6P), these non-contact switches are ideal for wet environments. They have two active sensing faces allowing more flexible mounting options. Slim housings to accomodate narrow mounting areas Two active sensing faces allowing more flexible mounting options Operating distance for safety contacts: make 12mm; break 23mm Operating temperature range: -10°C to +65°C M4 mounting IP67 rating (NEMA 6P) Cat. 1 Device per EN954-1 Dual channel interlocks suitable for Cat. 3 or 4 systems Approvals CE Marked for all applicable directives and cULus. Standards EN954-1, ISO13849-1, IEC/EN60204-1, NFPA79, EN1088, ISO14119, ANSI B11.19, AS4024.1.

Product Detail

New items

PSEN cs3.1p, Pilz

PSENcode Compact Non-Contact Safety Switch, Coded The PSEN cs3.1 and PSEN cs3.1p safety switches are coded and only switch with an actuator from the PSEN cs3.1 series. There is no restriction on the number of times the actuator can be used and reset. Features and Benefits Transponder technology for presence detection (safety function) Coded switch Dual-channel operation 2 safety inputs for series connection of multiple safety switches 2 safety outputs 1 signal output LED display for state of the actuator, state of the inputs and supply voltage/fault 1 direction of actuation IP69K protection Stock no. 918-6655 has an M12 8 pole male connector Stock no. 918-6664 has an M8 8 pole male connector Approvals CE, cULus Listed, TÜV, BG, CCC. Caution The safety level PLe (Cat. 4)/SIL CL 3 is only achieved if the safety outputs use 2-channel processing. Standards EN 60947-5-3 with the actuator PSEN cs3.1 PDDB; EN 62061 SIL CL 3; EN ISO 13849-1 PLe Cat. 4; EN ISO 14119 coding level Low, Type4. Supplied with Actuator.

Product Detail

New items

542000, Pilz

PSENcode Slim Non-Contact Safety Switch, Coded The PSEN cs5.11 and PSEN cs5.1p safety switches are coded and only switch when used with an actuator from the PSEN cs1.1 series. There is no restriction on the number of times the actuator can be used and reset. Features and Benefits Transponder technology for presence detection Coded switch Dual-channel operation 2 safety inputs for series connection of multiple safety switches 2 safety outputs Safety Device Diagnostics (SDD) Safety Device Diagnostics can be used to poll sensor information, to perform actions and to read configuration parameters Diagnostic input for Y1 for Safety Device Diagnostics (SDD) Signal output/diagnostic output Y32 for Safety Device Diagnostics LED display for state of actuator detection, state of the inputs and supply voltage/fault IP66 / IP67 protection PSEN cs5.11 (stock no. 918-6667 ) 1 actuation direction with 3 approach directions: square marking for normal operating distance M12 8 pole male connector 30 N holding force PSEN cs5.1p (stock no. 918-6661 ) 4 actuation directions, each with 3 approach directions: square marking for normal operating distance and triangle marking for short operating distance M8 8 pole male connector Caution The safety level PLe (Cat. 4)/SIL CL 3 is only achieved if the safety outputs use 2-channel processing. Standards EN 60947-5-3; EN 62061 SIL CL 3; EN ISO 13849-1 PLe Cat. 4; EN ISO 14119 Coding level Low, Type4. Approvals CE, TÜV, UL/cUL, FCC, IC, ECOLAB. Supplied with Actuator.

Product Detail

New items

2702972, Eaton Fulleon

Proximity safety circuit, unicode sensor with RFID coding, model 4, automatic or manual start, integrated diagnostics, 24 V DC supply, M12 connector. The PSR-CT safety circuit consists of a combination of a PSR-CT-...-SEN-1-8 sensor with varying coding types and a coded PSR-CT-C-ACT actuator. It provides maximum tamper protection and the highest level of safety. The PSR-CT safety circuit is available with the following types of coding: Fixcode: For the sensor to detect the actuator, the actuator must first be associated with the sensor via a learning process. The learning process can only be completed once. The sensor and actuator are then permanently assigned to each other by their coding. Safety circuits with fixcode evaluation achieve a high coding level. Unicode: For the sensor to detect the actuator, the actuator must first be assigned to the sensor via a learning process. The learning process for a new actuator can be repeated any number of times. The sensor only detects the last learned actuator. Safety circuits with unicode evaluation achieve a high coding level. Multicode: The sensor detects every actuator of the approved type. No specific actuator code can be assigned. Safety circuits with multicode evaluation achieve a low coding level.

Product Detail

New items

440N-S32033, Allen Bradley Guardmaster

Allen-Bradley Sipha S2 Non-contact Safety Switch The Sipha S2 is a non-contact switch in a slim ABS housing with moulded-in brackets, making it extremely versatile and simple to install. It incorporates several magnetically sensitive elements, which must be triggered in a particular sequence to operate correctly. It is designed to operate with its own actuator to help prevent the switch being defeated by a simple magnet. The Sipha S1 must be connected to the Sipha control unit to provide a monitored circuit. Coding meets the requirements of more complex applications where simple magnetically actuated switching may not be sufficient Head & actuator are IP67 rated, which is ideal for steam cleaning or high pressure hosing down Non-contact actuation Magnetic coded sensing Slim moulded ABS housing, 82x19x19mm Must be operated with its own safety control unit Approvals UL, CSA. Standards EN1088, EN292, EN60204-1. Supplied with Stock nos. 334-0777 & 335-5763 have a 3m cable attached, stock no. 873-2219 has a 10m cable attached.

Product Detail