What are the shipping charges for products like Non Contact Safety Switches?

Yes. We keep updating our stock frequently and if a product like Non Contact Safety Switches is not in stock then we will let you know.

How do I contact the Customer Support Team?

Yes. We keep updating our stock frequently and if a product like Non Contact Safety Switches is not in stock then we will let you know.

Where are your products like Non Contact Safety Switches manufactured?

Yes. We keep updating our stock frequently and if a product like Non Contact Safety Switches is not in stock then we will let you know.

Do you offer any discounts on bulk orders of products like Non Contact Safety Switches?

Yes. We keep updating our stock frequently and if a product like Non Contact Safety Switches is not in stock then we will let you know.

How long will it take to receive the order that I placed for Non Contact Safety Switches?

Yes. We keep updating our stock frequently and if a product like Non Contact Safety Switches is not in stock then we will let you know.

Are your products Non Contact Safety Switches in stock?

Yes. We keep updating our stock frequently and if a product like Non Contact Safety Switches is not in stock then we will let you know.

Non Contact Safety Switches | Magnetic Safety Switch

New items

XCSDMC791L01M8, Telemecanique

XCS-DMC/XCS-DMP Coded Magnetic Switches, Rectangular The Schneider XCS-DM coded magnetic safety switches are designed for monitoring the doors, covers and guards of industrial machines with imprecise guiding and low inertia. These safety switches are ideally suited for machines subjected to frequent washing or liquid spray. They protect the operator by immediately stopping any dangerous movement as soon as the distance between the switch and its magnet is greater than 8mm (5mm for XCS-DMC). The Schneider XPS-DM safety modules are specifically designed for monitoring the coded magnetic safety switches. When the XCS-DM safety switch is used in conjunction with the XPS-DM safety relay they offer a certified safety solution for guard monitoring. Coded magnetic safety switch Actuation on 3 sides: face to face and face to side 8mm tolerance to misalignment (5mm for XCS-DMC) LED versions have an LED in series with one N/C giving indication when guard is closed Coded reed technology - switch cannot be totally defeated by a simple magnet Rectangular plastic housing Dimensions: compact: H51 x W16 x D7mm, standard: H88 x W25 x D13mm Available pre-cabled or with connector on flying lead IP66/67 protection in accordance with EN/IEC 60529 ROHS compliant Safety module Allows multi-switch monitoring to Safety Category 4 solutions in accordance with EN954-1/ISO 13849-1 XPS-DMB can monitor 2 independent sensors and modules, XPS-DME can monitor 6 independent sensors and modules 2 safety outputs and 2 solid state outputs for signalling to the process PLC LEDs on the front face provide information on the monitoring circuit status Dimensions: H99 x W22 x D114mm IP20 protection on terminals and IP40 protection on enclosure, in accordance with EN/IEC 60529 Note With the appropriate monitoring system and correctly wired these switches can reach safety category 4 conforming to EN/ISO 13849-1, PL e conforming to EN/ISO 13849-1, SIL 3 conforming to EN/IEC 61508. Standards IEC 947...

Product Detail

New items

3SE66053BA, Siemens

3SE6, Coded, Miniature Magnet switches designed for mounting on movable protective guards such as covers, flaps and doors. Suitable for areas where cleaning, disinfecting or contamination is involved IP67 rated For a suitable safety relay, use 528-0908 Effective operating distance 4-14mm For a suitable coded magnet, use stock no 528-0857 Cable length of 3m Note Magnet supplied separately

Product Detail

New items

3SE66052BA, Siemens

3SE6, Coded, Rectangular Non Contact Safety Switch The SIRIUS 3SE6 non contact safety switches are designed for mounting on movable protective guards, e.g. hoods, flaps and doors. The enclosed design and high IP67 degree of protection, make these magnetically operated safety switches ideal for areas exposed to contamination, cleaning or disinfecting. Fits on movable protective guards such as hoods, flaps and doors Suitable for areas ex[posed to contamination, cleaning and disinfecting IP67 ingress protection Secure switching distance of 5mm ON and 15mm OFF Note Coded magnet supplied separately, RS stock no 528-0879 . For a suitable safety relay use RS stock no. 528-0908 .

Product Detail

New items

XCSDMC5905, Telemecanique Sensors

XCS-DMC/XCS-DMP Coded Magnetic Switches, Rectangular The Schneider XCS-DM coded magnetic safety switches are designed for monitoring the doors, covers and guards of industrial machines with imprecise guiding and low inertia. These safety switches are ideally suited for machines subjected to frequent washing or liquid spray. They protect the operator by immediately stopping any dangerous movement as soon as the distance between the switch and its magnet is greater than 8mm (5mm for XCS-DMC). The Schneider XPS-DM safety modules are specifically designed for monitoring the coded magnetic safety switches. When the XCS-DM safety switch is used in conjunction with the XPS-DM safety relay they offer a certified safety solution for guard monitoring. Coded magnetic safety switch Actuation on 3 sides: face to face and face to side 8mm tolerance to misalignment (5mm for XCS-DMC) LED versions have an LED in series with one N/C giving indication when guard is closed Coded reed technology - switch cannot be totally defeated by a simple magnet Rectangular plastic housing Dimensions: compact: H51 x W16 x D7mm, standard: H88 x W25 x D13mm Available pre-cabled or with connector on flying lead IP66/67 protection in accordance with EN/IEC 60529 ROHS compliant Safety module Allows multi-switch monitoring to Safety Category 4 solutions in accordance with EN954-1/ISO 13849-1 XPS-DMB can monitor 2 independent sensors and modules, XPS-DME can monitor 6 independent sensors and modules 2 safety outputs and 2 solid state outputs for signalling to the process PLC LEDs on the front face provide information on the monitoring circuit status Dimensions: H99 x W22 x D114mm IP20 protection on terminals and IP40 protection on enclosure, in accordance with EN/IEC 60529 Note With the appropriate monitoring system and correctly wired these switches can reach safety category 4 con...

Product Detail

New items

XCSZCP, Telemecanique Sensors

Non-Magnetic Shim - For Coded Magnetic Switch Xcsdmp

Product Detail

New items

XCSDMP5905, Telemecanique Sensors

Coded Magnetic Switch XCSDMP - 1 NC + 1 NO - Staggered - 5m

Product Detail

New items

STR1-SAFM03P5, Sick

the Str1 transponder safety switch has monitored semiconductor outputs (oSSds) and can be safely connected either individually or in series. It can be used for applications where a high level of manipulation protection is required. the Str1 is available with three codes. universally coded sensors accept all actuators. an actuator must be taught into both the uniquely coded and permanently coded variants, this is the only actuator that the Str1 then accepts. the sensor has three active sensor surfaces. the actuator comes in three different sizes. this allows the Str1 to offer maximum mounting flexibility. response range of up to 14 mm Small housing with flexible mounting options Sensor activation possible from three sides three different actuators available

Product Detail

New items

F3S-TGR-NSMC-21-M1J8, Omron

F3S-TGR Non Contact Safety Switch The F3S-TGR non contact safety switches are designed to interlock hinge, sliding or removable guard doors. Plastic and stainless steel switches are available, the latter are ideally suited to high hygiene demands in the food industry. The switches have a long sensing range to avoid false signals resulting from an ill aligned door, for example. Non-contact equals no abrasion which means no particles Excellent coverage of mechanical tolerances Can operate behind stainless steel fittings Screw hole covers F3S-TGR-N_C Switch Connect up to 3 switches in series LED for easy diagnosis Electronic output (potential-free optocoupler output) IP67 protection F3S-TGR-N_R Switch Connect up to 6 switches in series Reed contacts IP67 protection Note Models F3S-TGR-N_C are coded. Actuator is included. For suitable controller see the G9SA or G9SB from Omron, or the NE1A DeviceNet system. Standards EN standards certified by TÜV Rheinland, EN 954-1, EN ISO 13849-1, EN 60204-1, EN/IEC 60947-5-3, UL 508, CSA C22.2, BS 5304, EN 1088-1 conformance.

Product Detail

New items

440N-Z30UPT, Allen Bradley Guardmaster

SensaGuard 440N Cylindrical Non-Contact Switch The SensaGuard Non-Contact Switch is PLe, SIL 3 and Cat 4 rated and is intended for use with sliding, hinge or lift-off machine guard doors. These safety switches are based on RFID (Radio Frequency IDentification) technology for coding and inductive technology for sensing. Combined with a large sensing range for optimum operation and tolerance to misalignment, these non-contact switches are a cost-effective solution to a wide range of industrial safety applications. No dedicated controller required for its RFID coding security Switches can be connected in series with other devices (e.g. Light Curtains, E-stops, interlock switches) PLe, SIL 3, Cat 4 rating maintained with multiple units connected in series Can be connected to standard safety relays, SmartGuards and safety I/O blocks They provide three different types of PNP output including one auxiliary PNP Equipped with an LED to indicate the device status and any faults IP69K environmental rating Note Stainless steel version suitable for use in harsh environments. Standards IEC60947-5-3, IEC 61508, EN954 Supplied with Actuator.

Product Detail

New items

1091945, Sick

The Erwin sick inductive proximity sensor has a Semiconductor (OSSD) type of out put works with a supply voltage of 24V DC and the housing material of this sensor is made of nickel plated brass. Sensing range (Sn) up to 4 mm –25°C to +70°C storage temperature 10Hz to 55Hz vibration resistance Less then 100Hz actuation frequency

Product Detail

New items

1091946, Sick

The Erwin sick inductive proximity sensor has a Semiconductor (OSSD) type of out put works with a supply voltage of 24V DC and the housing material of this sensor is made of nickel plated brass. Sensing range (Sn) up to 4 mm –25°C to +70°C storage temperature 10Hz to 55Hz vibration resistance Less then 100Hz actuation frequency

Product Detail

New items

PSEN cs3.1 M12, Pilz

PSENcode Compact Non-Contact Safety Switch, Coded The PSEN cs3.1 and PSEN cs3.1p safety switches are coded and only switch with an actuator from the PSEN cs3.1 series. There is no restriction on the number of times the actuator can be used and reset. Features and Benefits Transponder technology for presence detection (safety function) Coded switch Dual-channel operation 2 safety inputs for series connection of multiple safety switches 2 safety outputs 1 signal output LED display for state of the actuator, state of the inputs and supply voltage/fault 1 direction of actuation IP69K protection Stock no. 918-6655 has an M12 8 pole male connector Stock no. 918-6664 has an M8 8 pole male connector Approvals CE, cULus Listed, TÜV, BG, CCC. Caution The safety level PLe (Cat. 4)/SIL CL 3 is only achieved if the safety outputs use 2-channel processing. Standards EN 60947-5-3 with the actuator PSEN cs3.1 PDDB; EN 62061 SIL CL 3; EN ISO 13849-1 PLe Cat. 4; EN ISO 14119 coding level Low, Type4. Supplied with Actuator.

Product Detail