Rates
1+
£ 19.21
Products Found: 418
Showing Results For: Push Button & Control Station Enclosures
Push Button & Control Station Enclosures
FILTERS
Filters
Showing
1 -
New Items
New items
New items
197239 M30-FI4-PV, Eaton
Surface mounting enclosure, flat, 4 mounting locations, 1 x M22/3 x M30
New items
197239 | M30-FI4-PV, Eaton
Surface mounting enclosure, flat, 4 mounting locations, 1 x M22/3 x M30
New items
ED3PBX, Hoffman Enclosures
Hoffman Drawn Series Pushbutton Enclosures
Hoffman Drawn series push button enclosures are designed to hold 30.5 mm or 22.5 mm push buttons and switches. These enclosures have no welded seams or sharp corners. The top cover features a gasket seal that provides an IP66 rating. The Drawn series are a 16 gauge steel with a grey polyester powder paint inside and out.
No welded seams or sharp corners
Cover screws outside gasket sealing surface
Flat or domed flanged cover
Bonding provision on cover
Grounding stud on body
Oil-resistant gasket
External welded-on mounting brackets for easy installation
30.5 mm or 22.5 mm size holes
Enclosures
Enclosures featured come with 22mm holes unless otherwise stated.
New items
E12SPBAM, Hoffman Enclosures
Hoffman E Series Sloped Pushbutton Enclosures
Hoffman E series sloped front push button enclosures are designed to hold 30.5 mm and 22.5 mm push buttons and switches. These enclosures have ground smooth continuously welded seams. The E series are made of steel with a grey polyester powder paint inside and out.
Seams continuously welded and ground smooth
Captivated cover screws thread into sealed wells
Bonding provision on cover
Grounding stud on body
Oil-resistant gasket
External welded-on mounting brackets for easy installation
30.5 and 22.5-mm size holes
Enclosures
Enclosures featured come with 22mm holes unless otherwise stated.
New items
E6PBG, Hoffman Enclosures
Hoffman E Series Pushbutton Enclosures
Hoffman E series push button enclosures are designed to hold 30.5 mm and 22.5 mm push buttons and switches. These enclosures have ground smooth continuously welded seams. The E series are made of steel with a grey polyester powder paint inside and out.
Seams continuously welded and ground smooth
Captivated cover screws thread into sealed wells
Bonding provision on cover
Grounding stud on body
Oil-resistant gasket
External welded-on mounting brackets for easy installation
30.5 mm and 22.5 mm size holes
Enclosures
Enclosures featured come with 22mm holes unless otherwise stated.
New items
9001K26, Schneider Electric
9001KY/SKY 30 mm Empty Enclosures
9001KY and 9001SKY 30 mm control stations are available in two forms: pre-assembled control stations and empty enclosures.
Empty enclosures (for customer assembly), empty guarded enclosures (mushroom head operator not included) and stainless steel NEMA 1 flush plates
Schneider Electric Class 9001, Type B and 30 mm Control Stations
New items
WMS120/LE, Clipsal Electrical
The Clipsal Electrical switch has a 1 pole. Rated current is 20A and rated voltage 250V.Changeover cast aluminium material.
Green Premium product
Mercury free
New items
E3PBSS6, Hoffman Enclosures
Hoffman E Series Stainless Steel Pushbutton Enclosures
Hoffman E series stainless steel push button enclosures are designed to hold 30.5 mm and 22.5 mm push buttons and switches. These enclosures have ground smooth continuously welded seams. The E series enclosures provide protection against dirt, dust, oil and water.
Seams continuously welded and ground smooth
Captivated cover screws thread into sealed wells
Bonding provision on cover
Grounding stud on body
Oil-resistant gasket
External welded-on mounting brackets for easy installation
30.5 mm and 22.5 mm size holes
Enclosures
Enclosures featured come with 22mm holes unless otherwise stated.
New items
XAPG19100, Schneider Electric
XAP 22 mm Enclosures - Accessories
XAPA glass-reinforced polyester enclosures, XAPG die-cast zinc enclosures, XAPE anodized aluminium flush mount enclosures and XAPZ drilled grounding plates are available with or without 22 mm holes for use with XB4 metal and XB5 plastic operators.
IP65 and IP657
New items
E4PBA, Hoffman Enclosures
Hoffman E Series Sloped Pushbutton Enclosures
Hoffman E series sloped front push button enclosures are designed to hold 30.5 mm and 22.5 mm push buttons and switches. These enclosures have ground smooth continuously welded seams. The E series are made of steel with a grey polyester powder paint inside and out.
Seams continuously welded and ground smooth
Captivated cover screws thread into sealed wells
Bonding provision on cover
Grounding stud on body
Oil-resistant gasket
External welded-on mounting brackets for easy installation
30.5 and 22.5-mm size holes
Enclosures
Enclosures featured come with 22mm holes unless otherwise stated.
New items
E9PBY25, Hoffman Enclosures
Hoffman E Series Extra Large Pushbutton Enclosures
Hoffman E series extra large push button enclosures are designed to hold 30.5 mm and 22.5 mm push buttons and switches. These enclosures have ground smooth continuously welded seams. The E series are a 14 gauge steel with a grey polyester powder paint inside and out.
Seams continuously welded and ground smooth
Captivated cover screws thread into sealed wells
Bonding provision on cover
Grounding stud on body
Oil-resistant gasket
External welded-on mounting brackets for easy installation
22.5-mm size holes
Enclosures
Enclosures featured come with 22mm holes unless otherwise stated.