No Comments found.
Featured Products
Hammond 1455 Series Mounting Hardware 868-2956 , lid screws, steel, clear, zinc plated, 6-32 x 3/8 in, qty 9 868-2950 , lid screws, steel, b...
Hammond 1434 Series Aluminium Chassis and Bottom Plates The 1434 series enclosures have a heavy duty aluminium chassis. Bottom plates are availa...
Hammond Enclosure Accessoires Hammond general purpose accessories for a wide range of enclosures.
Hammond 1434 Series Aluminium Chassis and Bottom Plates The 1434 series enclosures have a heavy duty aluminium chassis. Bottom plates are availa...
Hammond 1488 Series Hinged Cover Consolets The 1488 series of hinged cover consolets by Hammond are designed to be used as hydraulic, pneumatic...
Arduino Mega Development Board Cases These plastic cases house and protect your Arduino Mega board and are available in black, blue and grey. Fe...
Hammond 1418 Series Mild Steel Enclosure The 1418 series junction boxes have a body and door formed from 14 gauge steel. They have been designed...
Arduino Due Development Board Cases These plastic cases house and protect your Arduino Due board and are av...
Your request could not be completed at this time
Popular Categories For Hammond
Popular Items
Popular items
Hammond 1551, Enclosure, IP54 Black
The Hammond 1551USB1BK enclosure is ideally suited for dongles and/or mounting small printed circuit boards with USB connectors. It has a satin texture finish with a recessed cover for easy label installation. The 1551USB1BK is complete with lid and two self tapping screws.
Made of ABS PlasticIP Rating IP54Black colour
Popular items
Popular items
Hammond Grey ABS ABS Case, 114 x 36 x 25mm
The Hammond electronic instrument enclosures is ideally suited for mounting printed circuit boards. Ergonomically designed for a comfortable fit into the users hand. Lap joint construction provides protection against dust accumulation and splashing water. Moulded in a grey general purpose ABS plastic with a satin texture. It is grey in colour and has 114 x 36 x 25 mm dimensions.
It has IP54 protection
It has UL94 HB flammability rating
Popular items
Die Cast Stomp Box - Yellow
The Hammond diecast aluminum enclosures has lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. It has 4.43x2.38x1.48 inch dimension.
Low side wall draft angle
Rugged
Standard versions are designed to meet IP54
Popular items
Hammond 1590, Die Cast Aluminium Alloy Enclosure, IP54, Shielded, 119 x 94 x 34mm
The Hammond die cast aluminium enclosure is suitable for electronic instruments which is tough, yet easy to machine. It has a lap joint construction provides protection against dust and splashing water. Includes screws threaded into factory-tapped holes. It is green in colour and has 119 x 94 x 34 mm dimensions. It is RoHS and REACH Compliant.
It has IP54 protection
It provides improved EMI/RFI shielding
Popular items
Die Cast Stomp Box - Yellow
The Hammond diecast aluminum enclosures has lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. It has 4.7x3.7x1.66 inch dimension.
Low side wall draft angle
Rugged
Standard versions are designed to meet IP54
Popular items
1551 ABS Enclosure, IP54, 60 x 35 x 17mm
Hammond 1551 Miniature Plastic Enclosures
The Hammond 1551 Series of miniature general purpose electronic enclosures are ideally suited for mounting small printed circuit boards.
Ideally suited for mounting small printed circuit boards or used as potting boxes
Satin textured finish ABS plastic
2 PCB stand offs moulded into interior
Lap joint construction provides protection against ingress of dust and splashing water, IP54
Assembled with 2 self-tapping screws, colour matched to enclosure
Popular items
Extruded Enclosure - RFI - Flanged
The Hammond 1457 series extruded enclosure RFI flanged has an extruded aluminium body and two die cast aluminium end panels with integral bezel. These enclosures are designed for equipment interfacing or to house PCBs and heavy duty, wall-mounting option.
Watertight - heavy duty extruded enclosures designed to house P.C. boards or for equipment interfacing
Sized for standard Eurocard's
P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body
Rugged body constructed from one piece, extruded aluminium with a minimum thickness of .06 (1.5 mm)
Extruded aluminium body includes a recessed area for labels or membrane keypad
End panels are rugged - yet easy to machine - die cast aluminium with full perimeter self-adhesive gaskets
Designed to meet IP65
Choice of two versions - end panels without flange or with flange (for shelf or wall mounting)
Popular items
IP54 Handheld Enclosure, ABS, Grey, 130 x 65 x 25.5mm
Hand Held Instrument Cases
Moulded in either flame retardant ABS or general purpose ABS plastic.
2-piece lap joint construction
Designed to meet IP54
Extra deep top and shallow base sections
Recessed area on top of case for keypads/displays, etc.
Lid is secured with either Philips machine screws, threaded into tapped integral brass bushings (flame retardant version or self tapping screws (general purpose version)
Base with moulded knockouts for wall mounting
Top and base have 6 bosses for PCB mounting
Tops have vertical card guides
Note
Flame retardant version carries a UL flammability rating of 94V-0.
Popular items
1457 Aluminium Enclosure, 62 x 88.39 x 33.93mm
Hammond 1457 Extruded Aluminium Enclosures
The Hammond 1457 series enclosure has an extruded aluminium body and two diecast aluminium end panels with integral bezel. These enclosures are designed for equipment interfacing or to house PCBs.
Features and Benefits
Rugged body constructed from extruded aluminium with a minimum thickness of 1.5 mm
Sized for standard Eurocards
PCBs mount horizontally by sliding into internal slots extruded into the enclosure body
Extruded body includes a recessed area for labels or membrane keypad
Black satin powder paint end panels
IP65 protection
Popular items
Hammond 1590, Die Cast Aluminium Enclosure, IP65, Shielded, Flanged, 51.9 x 83.1 x 153.2mm
The Hammond watertight diecast enclosure with pcb guides with flanged base belongs to 1590 ribbed series. It is available in black colour.
Rugged electronic instrument enclosure
Lap joint construction provides protection against access of dust and splashing water
Low side wall draft angle for easy P.C. board mounting
Popular items
1414 N4 SS IP66 Wall Box, 304 Stainless Steel, Unpainted, 152 x 152 x 102mm
Hammond 1414 N4 SS Series Stainless Steel Junction Box
The 1414 series junction boxes have a body formed from 14 gauge 304 stainless steel. They have been designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
They are IP66 rated thus providing protection where nearby equipment may need to be hosed down or in applications where the environment is very wet such as outdoor applications.
The cover and enclosure are natural stainless steel with a smooth brushed finish. The removable inner panel has been finished in a white powder coating.
Features and Benefits
Formed from 14 gauge 304 stainless steel
Smooth, continuously welded seams
Welded brackets provide for enclosure mounting
Continuous stainless steel hinged cover is secured with stainless steel clamps and screws
Seamless poured-in place gasket
All models include a removable 14 gauge inner panel
Tapped studs are provided for mounting inner panels
A bonding stud is provided on the door and a grounding stud is provided in the enclosure
RoHS compliant
Standards
UL 508 Type 3R, 4, 4X, 12 and 13.
CSA Type 3R, 4, 4X, 12 and 13.
Complies with NEMA Type 3R, 4, 4X, 12 and 13, JIC EGP-1-1967, IEC 60529, IP66.
Approvals
SA, UL, CE.
New Items
New items
Arduino Leonardo, M0 Pro, Uno or Yun Enc
Molded in a general purpose ABS plastic with a satin texture.
Enclosure designed to allow access to I/O connectors & often used controls and/or LEDS
Models are adaptable to a wide selection of Arduinos
Enclosure is secured with self tapping screws.
Includes four (4) self adhesive rubber feet & instruction sheet.
Arduino boards are not included
New items
Hammond 1551, Enclosure, IP54 Translucent Red
The Hammond 1551CTRD enclosure is ideally suited for mounting of printed circuit boards horizontally. It has a satin texture finish with a recessed cover for easy label installation. The 1551CTRD enclosure is complete with lid and two self tapping screws.
Made of ABS PlasticIP Rating IP54Translucent Red colour
New items
Hammond 1551, Enclosure, IP30 White
The Hammond 1551V4WH enclosure has a vented design which protects electronics from harmful contact with hands or tools, but allows entry of air and moisture for applications which require environmental exposure. It is ideally suited for mounting of printed circuit boards. The 1551V4WH slots on the base of the enclosure which allows an easy wall-mounting. It has a satin texture finish with a knockout on the base which can be removed with a screwdriver and used for wire entry.
Made of ABS PlasticIP Rating IP30White colour
New items
1444 Aluminium Enclosure, 305 x 254 x 76mm
Hammond 1434 Series Aluminium Chassis and Bottom Plates
The 1434 series enclosures have a heavy duty aluminium chassis. Bottom plates are available separately for each unit.
Features and Benefits
Spot welded heavy duty construction chassis
Natural finish protected through manufacturing and shipping with a plastic skin cover to ensure a high quality finish
Optional bottom plates are punched with 4 holes – 3/16 inch diameter (Chassis requires drilling to install optional bottom plates)
Note
Hardware not provided, please order separately - Part number 1421J6 (Pkg. of 6, 6-32 Philips head screws)
Aluminium Enclosures
New items
1591 ABS Enclosure, IP54, 120 x 120 x 59mm
Hammond 1591 Multi-purpose Plastic Enclosures
The Hammond 1591 series is a multi-purpose plastic enclosure ideally suited for mounting printed circuit boards (PCBs) horizontally. The internal sides of the enclosure are smooth for easy connector installation. Each enclosure has 2 PC board standoffs moulded into the interior and a lap joint construction which provides IP54 protection against the access of dust and splashing water. The Hammond 1591 series is perfect for applications where repetitive assembly and disassembly are required.
Two piece lap joint construction
Provides protection against dust accumulation and splashing water
Integral card guides accept 1.5mm PC cards
Lid secured with M3 x 10 mm machine screws, threaded into tapped integral brass bushings
Dimensions do not include the lid (add 4mm to height for the lid)
Note
Black enclosures include black screws, grey enclosures are standard nickel finish screws.
New items
1455 Aluminium Enclosure, 80 x 42.5 x 25.12mm
Hammond 1455 Enclosure with Metal End Panels
The Hammond 1455 series enclosure has an extruded aluminium body and two metal end panels with integral bezel. These enclosures are designed to house P.C. boards or for equipment interfacing.
Features and Benefits
Designed to house P.C. boards or for equipment interfacing
Sized for standard Eurocards
PCBs mount horizontally by sliding into internal slots extruded into the enclosure body
Enclosure includes two metal end panels with integral bezel
Rugged body constructed from extruded aluminium with a minimum thickness of 1.5 mm
Extruded body includes a slide removable belly plate, except in smaller sizes (A, B, C & D)
Smaller sizes (A & B) are rounded for better hand held ergonomics
DIN Rail clips & flange kits are available separately
Supplied with
1 x extruded aluminium body, 2 x ABS end panels, 6 x end panel screws and self-adhesive rubber feet.
New items
Hammond DIN Rail Enclosure Enclosure Type 1597DIN Series , 90 x 105 x 58mm, Polycarbonate DIN Rail Enclosure
The Hammond din rail mounted enclosure is ideally suited for housing electronics for DIN rail-mounted devices. Its material carries a flammability rating of UL94-V0.
Designed to meet IP20
Snap closures for easy assembly
New items
Hammond 1597DIN series 52.2 x 10.24mm Cover for use with 1597DIN6GY, 1597DIN9GY
The Hammond din rail mounted enclosure cover is ideally suited for housing electronics for DIN rail-mounted devices. Its material carries a flammability rating of UL94-V0.
Designed to meet IP20
Snap closures for easy assembly
New items
Hammond 1597DIN series 34.70 x 10.24mm Cover for use with 1597DIN2GY, 1597DIN4GY
The Hammond din rail mounted enclosure cover is ideally suited for housing electronics for DIN rail-mounted devices. Its material carries a flammability rating of UL94-V0.
Designed to meet IP20
Snap closures for easy assembly
New items
Hammond 1590, Die Cast Aluminium Enclosure, IP65, Shielded, Flanged, 39.25 x 94 x 119.5mm
The Hammond watertight diecast enclosure with flanged base belongs to 1590 series. It is available in black colour.
Rugged electronic instrument enclosure
Lap joint construction provides protection against access of dust and splashing water
Low side wall draft angle for easy P.C. board mounting
New items
Hammond 1590, Die Cast Aluminium Enclosure, IP65, Shielded, Flanged, 43.6 x 94 x 119.5mm
The Hammond watertight diecast enclosure with flanged base belongs to 1590 series. It is available in natural colour.
Rugged electronic instrument enclosure
Lap joint construction provides protection against access of dust and splashing water
Low side wall draft angle for easy P.C. board mounting
New items
Hammond 1590, Die Cast Aluminium Enclosure, IP65, Shielded, Flanged, 42.1 x 94 x 148mm
The Hammond watertight diecast enclosure with flanged lid belongs to 1590 series. It is available in natural colour.
Rugged electronic instrument enclosure
Lap joint construction provides protection against access of dust and splashing water
Low side wall draft angle for easy P.C. board mounting