Featured Products
8329TFS is a thermally conductive two-part epoxy adhesive with a long working life. It is dark grey, smooth, thixotropic, and bonds well to a wid...
842AR is a conductive coating that consists of a one-part, solvent-based acrylic lacquer, pigmented with an extremely conductive silver flake. It...
8329TFF is a thermally conductive, fast-cure two-part epoxy adhesive. It is off-white, smooth, thixotropic, and bonds well to a wide variety of s...
4225 is a two-part epoxy conformal coating. It conforms to a durable, tough, semi-flexible coating with an excellent finish. It protects against...
The 8309 Conformal Coating Stripper is available in both liquid and pen format. It removes most reworkable conformal coatings and readily removes...
403C Super ColdTM HFO-1234ZE is a non-flammable cold spray that is used primarily for diagnosing thermally intermittent problems with electronic...
419E is a one-part acrylic conformal coating. It cures to a durable, flexible and smooth finish. It is easy to apply and can be handled in 15 min...
8810 is a black, tough, two-part polyurethane potting compound. It has a low mixed viscosity and excellent moisture resistance. In addition, it a...
9410 is a one-part electrically conductive epoxy adhesive. It has unlimited working time at room temperature. It bonds well to a wide variety of...
8800 is a black, flexible, two-part polyurethane potting compound. It has a low mixed viscosity and maintains excellent flexibility at low temper...
Popular Categories For MG Chemical
Categories For MG Chemical
Popular Items
Popular items
Popular items
8329TFS-50ML, MG Chemical
8329TFS is a thermally conductive two-part epoxy adhesive with a long working life. It is dark grey, smooth, thixotropic, and bonds well to a wide variety of substances. This product is used to bond heat sinks, LEDs, and other heat-generating components in electronic assemblies. It is suitable for use with dual-syringes, mix-tips, and automatic dispensing systems.
Thermal conductivity of 1.2 W/(m·K)
1:1 mix ratio
Working life: 4 hours
Cure time: 80 minutes at 80 °C (176 °F)
Provides strong electrical insulation
High compressive strength
Strong resistance to humidity, salt water, mild bases, and aliphatic hydrocarbons
Shelf life: ≥3 years
Popular items
842AR-140G, MG Chemical
842AR is a conductive coating that consists of a one-part, solvent-based acrylic lacquer, pigmented with an extremely conductive silver flake. It is smooth, hard, and abrasion resistant. It can be easily applied by brush or spray. It has a quick dry time, with no heat cure necessary. It adheres strongly to most injection-molded plastics, such as ABS, PBT and PVA. It provides superior high frequency shielding. It also provides strong corrosion resistance, and is suitable for use in marine environments. 842AR is designed to provide a conductive coating for the interior of plastic electronic enclosures that suppresses EMI/RFI emissions. It excels when the highest level of shielding is required. Also, its thin minimum layer height makes it suitable for board level applications.
Provides superior EMI/RFI shielding over a broad frequency range
Resistivity of 7.6 x 10-5 ohmcm
Can be applied very thin, 0.2 mil minimum coating thickness
Mild solvent system, and safe on polystyrenes
HAP free does not contain toluene, xylene, or MEK.
Popular items
8329TFF-25ML, MG Chemical
8329TFF is a thermally conductive, fast-cure two-part epoxy adhesive. It is off-white, smooth, thixotropic, and bonds well to a wide variety of substances. It is also flame retardant. For a 1 mL quantity, a minimal service cure can be achieved in 15 minutes at room temperature, and a full cure in 4 hours.
This product is used to bond heat sinks, LEDs and other heat-generating components in electronic assemblies. It is suitable for use with dual-syringes, mix-tips and automatic dispensing systems.
Thermal conductivity of 0.8 W/(m·K)
1:1 mix ratio
Working life: 4 minutes
Set time: 15 minutes
Cure time: 4 hours at room temperature or 15 minutes at 65 °C (149 °F)
Flame retardant standard
Provides strong electrical insulation
Low CTE prior Tg
High tensile and compressive strength
Strong resistance to humidity, salt water, mild bases, and aliphatic hydrocarbons
Shelf life: ≥3 years
Popular items
4225-1.35L, MG Chemical
4225 is a two-part epoxy conformal coating. It conforms to a durable, tough, semi-flexible coating with an excellent finish. It protects against harsh chemicals, humidity, corrosion, oil, dirt, thermal shock, and abrasion. It also prevents high-voltage arcing, short circuits, and static discharges. 4225 is a promising choice where extreme physical and chemical resistance are required.
2:1 mix ratio
Ready to spray
Inspection under UV light
Thin coating application - can be coated as thin as 0.5 mil
Excellent corrosion and chemical resistance
Popular items
Popular items
8309-850ML, MG Chemical
The 8309 Conformal Coating Stripper is available in both liquid and pen format. It removes most reworkable conformal coatings and readily removes thermoplastic (non-cross linked) acrylics, urethanes, and silicones based conformal coatings. It also facilitates the removal of some thermoset coatings like cross-linked silicones and polyurethanes by softening or swelling the coat to aid with mechanical removal. This stripper is safe for most types of PCB components. It is fully biodegradable and environmentally safe. Applications & Usages: The primary applications of the 8309 are for PCB maintenance and repairs. It also works well for removing conductive ink lacquers. The low viscosity allows PCBs to be easily submersed in the stripper.
Strips acrylics, polyurethanes, and silicones
Liquid format allows for full submersion of PCBs
Safe on metals
Contains no SVHCs
Biodegradable
Available in liquid
Popular items
403C-235G, MG Chemical
403C Super ColdTM HFO-1234ZE is a non-flammable cold spray that is used primarily for diagnosing thermally intermittent problems with electronic devices. It is also useful for protecting heat sensitive components during soldering, quickly cooling solder joints, and it can also be used to quickly remove gum and other adhesives from a variety of surfaces.
Low global warming potential
VOC free
Ozone safe
Non-flammable
Non-conductive
Zero residue
Safe for use on energized circuits
Popular items
419E-340G, MG Chemical
419E is a one-part acrylic conformal coating. It cures to a durable, flexible and smooth finish. It is easy to apply and can be handled in 15 minutes. It may be removed with appropriate strippers, or soldered through for repair or rework. 419E creates a robust moisture barrier that protects printed circuit boards in humid environments. It provides strong protection against moisture, corrosion, fungus, dirt, dust, thermal shock, short circuits, high-voltage arcing, and static discharge
Xylene and toluene free
Fluoresces under UV-A light
Suitable for use with robotic coating equipment
Popular items
8810-375ML, MG Chemical
8810 is a black, tough, two-part polyurethane potting compound. It has a low mixed viscosity and excellent moisture resistance. In addition, it adheres strongly to a wide variety of substrates, including metals, composites, glass, ceramics, and many plastics. 8810 offers exceptional physical protection, and is designed for potting and encapsulating intricate electronic components and cable jointing boxes.
2:1 mix ratio
45 minute working life
24 hour cure at room temperature
Constant service temperature of -50 to 120 °C (-58 to 248 °F)
Low exotherm
Excellent dielectric properties
Popular items
9410-3ML, MG Chemical
9410 is a one-part electrically conductive epoxy adhesive. It has unlimited working time at room temperature. It bonds well to a wide variety of substrates, and offers strong chemical resistance. 9410 is designed for semi-conductor flip chip packaging as well as die attach for small chips, LEDs and diodes. It provides excellent EMI/RFI shielding and is very effective at filling in seams between metal plates. It can be readily used in manual, pneumatic and robotic dispensing processes.
Resistivity of 0.0018 Ω·cm
Unlimited working time at room temperature
Minimum cure temperature of 90 °C [194 °F]
Ready to dispense no mixing is required
Low viscosity
Popular items
8800-375ML, MG Chemical
8800 is a black, flexible, two-part polyurethane potting compound. It has a low mixed viscosity and maintains excellent flexibility at low temperatures. In addition, it adheres strongly to a wide variety of substrates, including metals, composites, glass, ceramics, and many plastics. 8800 is a cost-effective flexible potting option that provides exceptional physical protection and creates minimum stress on circuit boards and surface-mounted devices. It offers superior moisture resistance and is an ideal choice for harsh environment applications, especially salt water exposure and marine applications.
2:1 mix ratio
5-7 minute working time
24 hour cure at room temperature
Constant service temperature of -50 to 120 °C (-58 to 248 °F)
Excellent dielectric properties
New Items
New items
New items
8329TFS-50ML, MG Chemical
8329TFS is a thermally conductive two-part epoxy adhesive with a long working life. It is dark grey, smooth, thixotropic, and bonds well to a wide variety of substances. This product is used to bond heat sinks, LEDs, and other heat-generating components in electronic assemblies. It is suitable for use with dual-syringes, mix-tips, and automatic dispensing systems.
Thermal conductivity of 1.2 W/(m·K)
1:1 mix ratio
Working life: 4 hours
Cure time: 80 minutes at 80 °C (176 °F)
Provides strong electrical insulation
High compressive strength
Strong resistance to humidity, salt water, mild bases, and aliphatic hydrocarbons
Shelf life: ≥3 years
New items
842AR-140G, MG Chemical
842AR is a conductive coating that consists of a one-part, solvent-based acrylic lacquer, pigmented with an extremely conductive silver flake. It is smooth, hard, and abrasion resistant. It can be easily applied by brush or spray. It has a quick dry time, with no heat cure necessary. It adheres strongly to most injection-molded plastics, such as ABS, PBT and PVA. It provides superior high frequency shielding. It also provides strong corrosion resistance, and is suitable for use in marine environments. 842AR is designed to provide a conductive coating for the interior of plastic electronic enclosures that suppresses EMI/RFI emissions. It excels when the highest level of shielding is required. Also, its thin minimum layer height makes it suitable for board level applications.
Provides superior EMI/RFI shielding over a broad frequency range
Resistivity of 7.6 x 10-5 ohmcm
Can be applied very thin, 0.2 mil minimum coating thickness
Mild solvent system, and safe on polystyrenes
HAP free does not contain toluene, xylene, or MEK.
New items
8329TFF-25ML, MG Chemical
8329TFF is a thermally conductive, fast-cure two-part epoxy adhesive. It is off-white, smooth, thixotropic, and bonds well to a wide variety of substances. It is also flame retardant. For a 1 mL quantity, a minimal service cure can be achieved in 15 minutes at room temperature, and a full cure in 4 hours.
This product is used to bond heat sinks, LEDs and other heat-generating components in electronic assemblies. It is suitable for use with dual-syringes, mix-tips and automatic dispensing systems.
Thermal conductivity of 0.8 W/(m·K)
1:1 mix ratio
Working life: 4 minutes
Set time: 15 minutes
Cure time: 4 hours at room temperature or 15 minutes at 65 °C (149 °F)
Flame retardant standard
Provides strong electrical insulation
Low CTE prior Tg
High tensile and compressive strength
Strong resistance to humidity, salt water, mild bases, and aliphatic hydrocarbons
Shelf life: ≥3 years
New items
4225-1.35L, MG Chemical
4225 is a two-part epoxy conformal coating. It conforms to a durable, tough, semi-flexible coating with an excellent finish. It protects against harsh chemicals, humidity, corrosion, oil, dirt, thermal shock, and abrasion. It also prevents high-voltage arcing, short circuits, and static discharges. 4225 is a promising choice where extreme physical and chemical resistance are required.
2:1 mix ratio
Ready to spray
Inspection under UV light
Thin coating application - can be coated as thin as 0.5 mil
Excellent corrosion and chemical resistance
New items
New items
8309-850ML, MG Chemical
The 8309 Conformal Coating Stripper is available in both liquid and pen format. It removes most reworkable conformal coatings and readily removes thermoplastic (non-cross linked) acrylics, urethanes, and silicones based conformal coatings. It also facilitates the removal of some thermoset coatings like cross-linked silicones and polyurethanes by softening or swelling the coat to aid with mechanical removal. This stripper is safe for most types of PCB components. It is fully biodegradable and environmentally safe. Applications & Usages: The primary applications of the 8309 are for PCB maintenance and repairs. It also works well for removing conductive ink lacquers. The low viscosity allows PCBs to be easily submersed in the stripper.
Strips acrylics, polyurethanes, and silicones
Liquid format allows for full submersion of PCBs
Safe on metals
Contains no SVHCs
Biodegradable
Available in liquid
New items
403C-235G, MG Chemical
403C Super ColdTM HFO-1234ZE is a non-flammable cold spray that is used primarily for diagnosing thermally intermittent problems with electronic devices. It is also useful for protecting heat sensitive components during soldering, quickly cooling solder joints, and it can also be used to quickly remove gum and other adhesives from a variety of surfaces.
Low global warming potential
VOC free
Ozone safe
Non-flammable
Non-conductive
Zero residue
Safe for use on energized circuits
New items
419E-340G, MG Chemical
419E is a one-part acrylic conformal coating. It cures to a durable, flexible and smooth finish. It is easy to apply and can be handled in 15 minutes. It may be removed with appropriate strippers, or soldered through for repair or rework. 419E creates a robust moisture barrier that protects printed circuit boards in humid environments. It provides strong protection against moisture, corrosion, fungus, dirt, dust, thermal shock, short circuits, high-voltage arcing, and static discharge
Xylene and toluene free
Fluoresces under UV-A light
Suitable for use with robotic coating equipment
New items
8810-375ML, MG Chemical
8810 is a black, tough, two-part polyurethane potting compound. It has a low mixed viscosity and excellent moisture resistance. In addition, it adheres strongly to a wide variety of substrates, including metals, composites, glass, ceramics, and many plastics. 8810 offers exceptional physical protection, and is designed for potting and encapsulating intricate electronic components and cable jointing boxes.
2:1 mix ratio
45 minute working life
24 hour cure at room temperature
Constant service temperature of -50 to 120 °C (-58 to 248 °F)
Low exotherm
Excellent dielectric properties
New items
9410-3ML, MG Chemical
9410 is a one-part electrically conductive epoxy adhesive. It has unlimited working time at room temperature. It bonds well to a wide variety of substrates, and offers strong chemical resistance. 9410 is designed for semi-conductor flip chip packaging as well as die attach for small chips, LEDs and diodes. It provides excellent EMI/RFI shielding and is very effective at filling in seams between metal plates. It can be readily used in manual, pneumatic and robotic dispensing processes.
Resistivity of 0.0018 Ω·cm
Unlimited working time at room temperature
Minimum cure temperature of 90 °C [194 °F]
Ready to dispense no mixing is required
Low viscosity
New items
8800-375ML, MG Chemical
8800 is a black, flexible, two-part polyurethane potting compound. It has a low mixed viscosity and maintains excellent flexibility at low temperatures. In addition, it adheres strongly to a wide variety of substrates, including metals, composites, glass, ceramics, and many plastics. 8800 is a cost-effective flexible potting option that provides exceptional physical protection and creates minimum stress on circuit boards and surface-mounted devices. It offers superior moisture resistance and is an ideal choice for harsh environment applications, especially salt water exposure and marine applications.
2:1 mix ratio
5-7 minute working time
24 hour cure at room temperature
Constant service temperature of -50 to 120 °C (-58 to 248 °F)
Excellent dielectric properties
Don’t hesitate to ask questions for better clarification.