RS Pro Carbon Steel Anchor Bolt M16, fixing hole diameter 16mm, length 150mm

This range of anchor bolts from RS Pro are high-quality zinc-plated through bolts that are torque-controlled anchors and are appropriate for use in concrete over C20/25. 

Through-bolt anchors are among the most commonly used fixing bolts. They are designed to fix surfaces like concrete, natural stone, and brick. These are available in various sizes and lengths to best fit different applications. With such versatility, these Bolt Anchors can secure fixings most suitable for medium-to heavy-duty loads. The bolts come in many sizes from which you can choose the best one for your application. Many other Masonry Plugs and anchor through bolts will meet all your fixing requirements.

Features and Benefits

• These anchor bolts are manufactured from carbon steel.
• They are zinc plated, and yellow passivated min 5μm.
• Available in a wide range of sizes.

Applications

Anchor bolts are suitable for medium-weight brickwork, blockwork, and masonry applications. These bolts allow fixing through the pre-positioned fixture. These are also appropriate for non-cracked concrete and structural applications that include:

• Barriers
• Warehouse racking
• Facade systems
• Outdoor seating
• Handrails

Other Types of Through Bolts

There is a wide range of through-bolt fixings to suit various applications that include:

• BZP through bolts
• Galvanized through bolts
• Hanger through bolts
• Steel through bolts
• Stainless steel through bolts

How to Fix Anchor Bolts?

There are a few steps you must follow to fix anchor bolts:

1. Before you start fixing a through bolt anchor, it is crucial to identify the drill bit size required and the hole depth needed
2. Once that is done, you can drill a hole and ensure that any dust and debris is cleaned out and ready for the anchor bolt to be fixed. 
3. Next, put the screw washer on the top of the Anchor Bolt until it is flush with the bolt.
4. Then insert the bolt through the hole, giving it a soft tap with a hammer if needed, until it reaches the end of the hole. 
5. Once inserted, you can tighten the nut on the anchor until it clicks. Always ensure not to exert too much torque as it can impact the fixing quality. 
6. At last, remove the Washer and Nut and the through bolt anchor are ready to use.

Why Choose Enrgtech?

Enrgtech brings you high-quality products with great value and a large variety. Our brand is trusted by professionals and DIY enthusiasts worldwide, and every one of our products has been tested to best suit the demanding industry standards.

For more information please check the datasheets.