Minimum Continuity Resistance:
20Ω
Dimensions:
100 x 250 x 125mm
Power Source:
Battery
Continuity Test Current:
10mA
Width:
250mm
Test Type:
Continuity, Frequency, Insulation Resistance, Loop and Line Resistance, Measure Motor Windings, Phase Sequence Test, Prospective Earth Fault Current, Prospective Short Circuit Current, RCD Test, Resistance, Voltage, Wiring Polarity
Remote Switch Mode:
Yes
Model Number p:
1664FC
Loop Impedance Test Type:
Phase to Earth, Phase to Neutral
Earth Resistance Measurement:
Yes
Battery Type:
AA
Maximum Continuity Resistance:
2000Ω
RCD Test Type:
A/F, AC, B/B+, G, S
RCD Ramp Test:
Yes
IP Rating:
IP40
Maximum Voltage Measurement:
500V ac/dc
Safety Category Level:
CAT III, CAT IV
Length:
100mm
Insulation Test Voltage:
50 V, 100 V, 250 V, 500 V, 1000 V
Interface Type:
BLE, USB
Automatic RCD Test:
Yes
Weight:
1.3 (with Battery)kg
Downloadable Data:
Yes
Safety Category Voltage:
300 V, 500 V
Plug Type:
UK
Height:
125mm
Safety Category:
CAT III 500 V, CAT IV 300 V
This is 1664FC Electrical Tester UKAS Calibration manufactured by Fluke. The manufacturer part number is FLK-1664FC DMS UK. Moreover, it has a minimum continuity resistance of 20ω . The given dimensions of the product include 100 x 250 x 125mm. Moreover, the product gets power from battery. It has a continuity test current about 10ma . Furthermore, the product is 250mm wide. It has a/an continuity, frequency, insulation resistance, loop and line resistance, measure motor windings, phase sequence test, prospective earth fault current, prospective short circuit current, rcd test, resistance, voltage, wiring polarity type test . It has a remote switch mode embedded yes . While it has 1664fc of model number. Moreover, it has a loop impedance phase to earth, phase to neutral test type . In addition, it has an earth resistance measurement feature yes . This aa battery is comparatively much efficient than common batteries. The product has a maximum continuity resistance about 2000ω . It has a/an a/f, ac, b/b+, g, s type RCD test . Moreover, it has an RCD ramp test trait yes . It is IP rated with ip40. It has a maximum 500v ac/dc voltage measurement . Moreover, its safety category level is cat iii, cat iv . Its accurate length is 100mm. It has 50 v, 100 v, 250 v, 500 v, 1000 v of insulation test voltage . It is a type of ble, usb interface. It went through an automatic RCD test yes . The typical product's weight is 1.3 (with battery)kg. It has downloadable data yes . Its safety category voltage is 300 v, 500 v . The plug is a highly reliable uk with long service life. In addition, the height is 125mm. It provides robust safety and is complied with cat iii 500 v, cat iv 300 v safety category.
Reviews
Don’t hesitate to ask questions for better clarification.