Products Found: 12
Showing Results For: Electrical Installation Testers
Electrical Installation Testers
FILTERS
Filters
Enrgtech #
Manufacturer Part No
Name
Availability
Price
Rating
Fluke
1664 DE-TPL KIT, Fluke
Pre Order
Check Stock & Lead Times Packaging Options
1 +
£ 1250.85
Fluke
1664 SCH-SPIKES, Fluke
2 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 1250.85
Fluke
1663 SCH-SPIKES, Fluke
2 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 1111.35
Fluke
1664 UK-T6, Fluke
1 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 1250.85
Megger
1008-130, Megger
Pre Order
Check Stock & Lead Times Packaging Options
1 +
£ 1150.88
Megger
1008-127, Megger
Pre Order
Check Stock & Lead Times Packaging Options
1 +
£ 1236.44
Seaward
363A912, Seaward
18 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 971.85
Fluke
1663 UK-CLAMP, Fluke
Pre Order
Check Stock & Lead Times Packaging Options
1 +
£ 1111.35
Kewtech Corporation
KT63, Kewtech Corporation
Pre Order
Check Stock & Lead Times Packaging Options
1 +
£ 497.55
Fluke
FLK-1664FC DMS UK, Fluke
Pre Order
Check Stock & Lead Times Packaging Options
1 +
£ 1449.87
Megger
MTK320-BS, Megger
Pre Order
Check Stock & Lead Times Packaging Options
Gossen Metrawatt
M520S, Gossen Metrawatt
Pre Order
Check Stock & Lead Times Packaging Options
1 +
£ 1086.24
Showing
1 -
New Items
New items
M520S, Gossen Metrawatt
PROFITEST MBASE+ M520S Electrical Test Instrument
Test Instrument for VDE 0100 / IEC 60364.6. A broad-range measuring device allows for use of the test instrument in all alternating and 3-phase electrical systems with voltages from 65 to 500 V and frequencies of 15.4 to 420Hz.
Loop and line impedance measurement
Measurement of insulation resistance using nominal voltage, with variable or rising test voltage
Low-resistance measurement
Earth resistance measurement
Standing-surface insulation measurement
Universal connector system
Measurement of contact voltage without tripping the RCCB
Contact voltage is measured with reference to nominal residual current using 1/3 of the nominal residual current value
Tripping test with nominal residual current, tripping time measurement
Testing of equipment and RCCBs with rising residual current including indication of tripping current and contact voltage at the moment the RCCB is tripped
Data Interfaces: USB slave for PC connection, RS 232 for barcode and RFID scanners
New items
1664 SCH-SPIKES, Fluke
Fluke 1664 FC Multifunction Installation Testers
Fluke 1664 part of the 1660 Series. The new Fluke 1660 series verify the safety of electrical installations in domestic, commercial and industrial applications. They ensure that fixed wiring is safe and correctly installed to meet the requirements of IEC 60364 and all relevant local standards. Fluke 1660 series are the only testers that help prevent damage to connected appliances.
Fluke 1664 FC contains the Insulation-PreTest™ safety function (patent pending). This function prevents you from performing tests with appliances that are connected to the system during test, eliminating accidental damage.
With the addition of Fluke Connect, you can now send test results directly to your smartphone. The results can then be transmitted to other members of the team. Data can also be saved to Fluke Cloud™ Storage, reducing the amount of paperwork and possible errors. It is a secure and accurate way to store test data and create test certificates with Fluke DMS (data management software).
Features
Insulation-PreTest™ safety function
Insulation at L-N, N-PE inputs
Automatic test sequence
Continuity at L-N, N-PE inputs
Fluke Connect® compatibility
ShareLive™ Calling
FlukeCloud™ Storage
On/Off switchable auto-start for RCD and looptest
Z max memory
Heavy duty, single input line cord
Standards
IEC 60364
Supplied with
6 x AA (LR6) cell batteries, CI600 hard carrying case, zero adapter, heavy-duty mains cord, test lead set, padded carrying/waist strap, quick reference guide, TP165X remote control probe & lead set (FTP used probes - UK only) and User's manual on CD-ROM.
Buy a Fluke 1664FC Multifunction Installation tester and get FREE ES165X Earth Spikes
New items
1663 UK-CLAMP, Fluke
The 1663 installation tester delivers the full-featured functionality and advanced measurement capabilities that professional installers need. It is compact and lightweight (less than 1.3 kg) and comes with a padded carrying and waist strap for convenient handling. Operation is intuitive and easily mastered by all levels of workers so you can put it to work immediately for quick and efficient testing to all local regulations. Additional helpful features like On/Off switchable auto-start for RCD and loop test, and self-test save time and give you more confidence in your results.
Full featured tester for installation professionals
Tests to all local regulations and provides test results for complete documentation
Tests continuity at L-N, N-PE inputs
Tests smooth dc sensitive RCDs (Type B)
Tests earth resistance, voltage, and frequency
Offers multiple test voltages: 50 V, 100 V, 250 V, 500 V, 1000 V
Checks wiring polarity to detect broken N wires
New items
1664 DE-TPL KIT, Fluke
Fluke 1664 FC Multifunction Installation Tester with T150 Tester and DMS Software
Save money when you buy the Fluke 1664 FC Installation Tester, the Fluke T150 Voltage & Continuity Tester and the DMS software together in this great value bundle.
Fluke 1664 FC Multifunction Installation Tester
The Fluke 1664 FC Installation Tester is a tester that helps prevent damage to connected appliances, reduces test time and features Fluke Connect.
Incorporated is Insulation-PreTest, a feature that allows the tester to determine if system under test has an appliance connected. If an appliance is detected the 1664 FC stops the test, helping to eliminate accidental damage.
To reduce test time the 1664 FC also offers an auto test function. One button press initiates a predefined sequence of seven tests. Compared to previous Fluke models this feature can save up to 40% in time.
The featured Fluke Connect allows measurements to be sent to a centralised cloud-based server, the Fluke Cloud. Data can be uploaded via a smartphone with the Fluke Connect app in real time. Making it easy to record, analyse and share data with colleagues from the field.
Features and Benefits
Fluke Connect compatible
Insulation pre-test – protects connected appliances from damage
Auto-test function – tests line/loop impedance, RCD trip current/trip time and insulation tests over a single connection with one button press
Automatic test start for loop and RCD tests, when mains voltage is stable testing commences
Additional high current loop mode. Faster measurements compared to loop tests with non-trip mode for RCDs
Z-max memory for loop tests – easy evaluation of the highest loop test value
Unique zero adapter for fast, always reliable and accurate test lead and mains cord compensation
Fast voltage measurement between L-N, L-PE and N-PE using the mains cord. No need to change measurement connection...
New items
New items
FLK-1664FC DMS UK, Fluke
Fluke 1664 FC Multifunction Installation Testers
Fluke 1664 part of the 1660 Series. The new Fluke 1660 series verify the safety of electrical installations in domestic, commercial and industrial applications. They ensure that fixed wiring is safe and correctly installed to meet the requirements of IEC 60364 and all relevant local standards. Fluke 1660 series are the only testers that help prevent damage to connected appliances.
Fluke 1664 FC contains the Insulation-PreTest™ safety function (patent pending). This function prevents you from performing tests with appliances that are connected to the system during test, eliminating accidental damage.
With the addition of Fluke Connect, you can now send test results directly to your smartphone. The results can then be transmitted to other members of the team. Data can also be saved to Fluke Cloud™ Storage, reducing the amount of paperwork and possible errors. It is a secure and accurate way to store test data and create test certificates with Fluke DMS (data management software).
Features
Insulation-PreTest™ safety function
Insulation at L-N, N-PE inputs
Automatic test sequence
Continuity at L-N, N-PE inputs
Fluke Connect® compatibility
ShareLive™ Calling
FlukeCloud™ Storage
On/Off switchable auto-start for RCD and looptest
Z max memory
Heavy duty, single input line cord
Standards
IEC 60364
Supplied with
6 x AA (LR6) cell batteries, CI600 hard carrying case, zero adapter, heavy-duty mains cord, test lead set, padded carrying/waist strap, quick reference guide, TP165X remote control probe & lead set (FTP used probes - UK only) and User's manual on CD-ROM.
New items
1008-130, Megger
Megger New MFT1700 Series
The new MFT1700 series from Megger tests low voltage electrical installations to BS7671. Providing all the tests required to complete the necessary electrical certification for industrial, commercial and domestic fixed wiring installations. The unique design allows it to be operated while mounted on the floor, a ladder-shelf, platform, and held or hung around the neck.
The new MFT1700 series includes full input protection and safety warnings when a hazardous voltage is present. If live voltages exist on a circuit during insulation or continuity testing, the voltage is displayed on the screen. If this voltage exceeds a safe level, further testing is inhibited and a warning beep sounds.
MFT1731 On-Site option is available complete with PowerSuite® Lite software. MFT1731 On-Site provides a professional solution to certification with electronic form completion from stored data within the MFT. Download to a mobile device such as a Smartphone or direct to a PC.
Features
Simple colour-coded test selection
Large clear backlit display for ease of use
Dual TEST and LOCK buttons, easy to use left or right handed
Two and three wire non-trip loop testing for RCD protected circuits
Type-B RCD and 3 phase RCD testing for industrial applications with no Earth - MFT1721 and MFT1731 ONLY.
3-terminal earth test and stake less testing for electrode resistance measurement
EN61010 CAT IV safety rating
Fully compliant with IEC 60364, VDE 0100 & BS7671
Durable IP54 case
Lightweight, compact design
Onsite Features
Bluetooth downloading
Onsite Software
Memory option
Rechargeable cells
200 mA test with option of 15 mA
3 pole earth test
Complete certificates on-site as you go or stores the data until you get home
Send results from MFT1731 tester direct to the correct location on the certificate
Reduce errors
Increase productivity
Saves you hours of form filling
Software ...
New items
1008-127, Megger
Megger New MFT1700 Series
The new MFT1700 series from Megger tests low voltage electrical installations to BS7671. Providing all the tests required to complete the necessary electrical certification for industrial, commercial and domestic fixed wiring installations. The unique design allows it to be operated while mounted on the floor, a ladder-shelf, platform, and held or hung around the neck.
The new MFT1700 series includes full input protection and safety warnings when a hazardous voltage is present. If live voltages exist on a circuit during insulation or continuity testing, the voltage is displayed on the screen. If this voltage exceeds a safe level, further testing is inhibited and a warning beep sounds.
MFT1731 On-Site option is available complete with PowerSuite® Lite software. MFT1731 On-Site provides a professional solution to certification with electronic form completion from stored data within the MFT. Download to a mobile device such as a Smartphone or direct to a PC.
Features
Simple colour-coded test selection
Large clear backlit display for ease of use
Dual TEST and LOCK buttons, easy to use left or right handed
Two and three wire non-trip loop testing for RCD protected circuits
Type-B RCD and 3 phase RCD testing for industrial applications with no Earth - MFT1721 and MFT1731 ONLY.
3-terminal earth test and stake less testing for electrode resistance measurement
EN61010 CAT IV safety rating
Fully compliant with IEC 60364, VDE 0100 & BS7671
Durable IP54 case
Lightweight, compact design
Onsite Features
Bluetooth downloading
Onsite Software
Memory option
Rechargeable cells
200 mA test with option of 15 mA
3 pole earth test
Complete certificates on-site as you go or stores the data until you get home
Send results from MFT1731 tester direct to the correct location on the certificate
Reduce errors
Increase productivity
Saves you hours of form filling
Software ...
New items
363A912, Seaward
Seaward Powerplus 1557 with PowerPlus PC Software
Traditional methods of inspection and testing require a multi-function installation tester and some additional means of recording inspection and test results.. A replica of the inspection and test certificate is held directly on the PowerPlus 1557 allowing the user to record test and inspection data in the field. When inspection and testing is complete the PowerPlus 1557 can then be synchronized using PowerPlus PC software to download and print the certificate onto pre-printed NICEIC, ECA, ECA SELECT or NAPIT stationary
Combined unit for inspection and testing of fixed electrical installations
Records test and inspection data directly on the tester, no need for paper or additional PDA devices
Fast and efficient - avoids entering data on twice with the benefit of reduced administration time
Built-in certificates include Electrical Installation Certificate, Periodic Inspection Report and Minor Works Certificate for domestic and commercial sites.
Bluetooth download and upload to PC
PowerPlus 1557 can be upgraded in the field as new certificates appear
Inbuilt intelligence provides onboard data validation checks for blanks fields or invalid measurements using the built in 17th Edition look-up tables, ensuring that only the correct information goes into the right certificate field
Integral certificate assistant holds commonly used tabulated values and look-up tables avoiding the need to take bulky reference material onsite.
PowerPlus PC software, transfers 17th edition certificate information from the 1557 to and from a PC via Bluetooth. This enables the upload of a certificate, carry out the required test and inspection, then download to PowerPlus PC for record traceability and print directly onto pre-printed NICEIC, ECA, ECA SELECT or NAPIT stationary. When the time comes to retest, the certificate data can simply be transferred back to the tester
Earth ...
New items
1663 SCH-SPIKES, Fluke
Fluke 1663 Multifunction Installation Testers
Fluke 1663 part of the 1660 Series. The new Fluke 1660 series verify the safety of electrical installations in domestic, commercial and industrial applications. They ensure that fixed wiring is safe and correctly installed to meet the requirements of IEC 60364 and all relevant local standards. Fluke 1660 series are the only testers that help prevent damage to connected appliances.
The Fluke 1663 is ideal for trouble shooting problems. Containing advanced measurement capability yet simple and easy to use.
Features
Continuity at L-N, N-PE inputs
On/Off switchable auto-start for RCD and looptest
Z max memory
Heavy duty, single input line cord
Note
Fluke 1663 replaces the existing Fluke 1653.
Standards
IEC 60364
Supplied with
6 x AA (LR6) cell batteries, CI600 hard carrying case, zero adapter, heavy-duty mains cord, test lead set, padded carrying/waist strap, quick reference guide, TP165X remote control probe & lead set (FTP used probes - UK only) and User's manual on CD-ROM.
Buy a Fluke 1663 Multifunction Installation tester and get FREE ES165X Earth Spikes
New items
MTK320-BS, Megger
Megger MTK320 Test Kit
Megger MTK320 series electrical installation test kit contains a full set of instruments for testing electrical installations to BS7671. Supplied in a durable carry case. All instruments meet the requirements of EN61557 as well as the safety standard IEC61010-1.
The MTK320 with 2 wire loop tester consists of:
MIT320
;
RCDT320
;
LTW325
LTW325
(MTK320 kit with 2 wire loop tester)
2 wire loop tests: Phase to Earth, Phase to Neutral or Phase to Phase
0.01Ω resolution
No-trip loop test on circuits with RCDs of ≥30 mA.
3 phase circuits with RCD protection can be tested
Fast loop and Non-tripping loop testing to 0.01ohms
Zmax
Phase to Phase measurements
Note
The calibrated version of this kit is supplied with an RS Calibration Certificate for the Insulation Tester, Loop Tester and RCD Tester
All instruments are available separately with calibration options and repair charges shown. See Stock Nos.
516-7710
,
712-5746
, and
198-457
.
RS is an authorised Megger distributor. Purchased though RS this product is eligible for the Megger extended 3 Year warranty
Supplied with
Custom fitted tough equipment case, batteries, test leads and user guides.
New items
KT63, Kewtech Corporation
KT63 Multifunction 5-1 tester
The KT63 Multifunction Tester is the perfect 17th Edition tester for electricians wanting to test and certify electrical installations in both domestic and commercial properties.
The KT63 Multifunction Tester offers a variety of tests including Continuity, Insulation, Auto RCD and Non-Trip Loop Testing all in compliance with Part P and BS7671 regulations
The KT63 Tester provides simple test selection and operation functions with a large screen for clearly displaying test results. Additional features including a hands-free testing mode make this a fast and accurate multifunction tester that offers an affordable option for installers and commissioning engineers.
Full no trip loop testing on all types of RCD
Displays PFC/PSC at the same time as the loop impedance reading
250V, 500V and 1000V insulation testing with auto discharge
Auto null eliminates test lead resistance when continuity testing
Auto RCD test mode for 30mA RCDs
RCD ramp test
Hands-free mode
Mains polarity test
Supplied with
ACC063 distribution board test lead set, kamp 12 mains lead, batteries, printed instruction manual, carry case
Electrical Installation Testers and Accessories